|
|
Model TMN 50 is the world's first digital encoder with a maximum range of 32,768 revolutions (15 Bits). Its resolution ist 13 Bits per 360° which means a total capacity of 28 Bits. Besides the CANopen output data it supplies an additional speed signal. The outstanding performance is achieved by the Hall sensor technology along with a micro-processor and a counter circuit. A reset storage device restores the position value in case the supply voltage is cut off or lowered beyond 12 VDC, provided the shaft is not deflected by more than ± 90° during the interruption of the supply voltage.
The new encoder features a very robust and compact housing of 50 mm diameter and only 54 mm length. It has been designed for heavy duty applications such as cranes, transportation equipment or building machinery. It can also be supplied in stainless steel for use under aggressive ambiant conditions.
|
|
Profile:
Dynapar™ - is a respected leader in commercial-light duty rotary encoders and industrial-duty absolute and incremental encoders, including motor mount encoders, for over 50 years. Dynapar has been a division and member company of the Danaher Industrial Controls Group since 1984.
Products:
Factory Automation & Feedback Controls: Absolute, Incremental (Commercial-Light Duty and Industrial-Duty) Encoders & Accessories
|
|
Low cost rugged encoder 10mm shaft diameter Square mount flange Quadrature output.
This low cost and very rugged size 25 encoder has been designed to suit a wide variety of industrial applications. The unit has a 10mm diameter shaft. A square mounting flange is fitted as standard. A 2M cable is fitted, this enters the unit via a gland situated on the side of the unit. The Output circuit has a push/pull output as standard, signals A, B, output.
• Quadrature output.
• Square mounting flange enables easy mounting.
• Robust heavy duty 10 mm shaft.
• Ideal replacement for mechanical counters when used in conjunction with a suitable electronic counter.
|
|
austriamicrosystems provides the world's broadest range of high performance absolute and incremental magnetic encoder ICs, ranging from 8 to 12-bit resolution, with serial digital, PWM and analog outputs.
|
|
Rotary ring encoder
Key Features:
· Continuous ring encoder
· Open measuring system
· Small profile
· Contact less design
· High measuring speed
· Superior accuracy
· Wide mounting tolerances
· Built-in signal interpolation
· Measurement through 360°
Open rotary ring encoder measuring system based on the purely inductive operating principal consists of:
- read head with sensors and integrated signal processing ASIC
- stainless steel ring with grating scale
This system features:
- ease of installation without special tools
- immunity to environmental influences
- immunity to electrical and electromagnetic interferences
- low profile, mass and inertia
- zero backlash
- through 360° angle encoding system
|
|
Sensors for controlling precise movement of sophisticated industrial equipments and apparatuses are increasingly important as key components in drive control. Copal's encoders and potentiometers are used for positioning and as angle sensors in fields such as industrial robots, measuring equipments, construction machinery, medical equipments, broadcasting, telecommunications, and security systems
Encoder
Copal's 3 types of encoders - optical, magnetic, and laser -meet customers' diverse requirements with a product range from compact low-torque types to ultra-high-resolution high-grade types
|
|
Incremental encoder is the term given to sensors for recording changes in position (linear or rotating) that can measure both the distance and direction of travel.
They are also known as optical encoders.
Unlike measuring systems that work continuously, incremental encoders have a solid measure with a repeating periodic counting track. The measurement is based on a directional reference and a count.
|
|
Elcis for making easy the mounting and use of its own encoders presents a large range of fittings:
- Flexible couplings,
- High precision couplings,
- Low-cost couplings,
- Fixing flanges,
- Measuring wheels,
- Fixing plates (even insulated),
- Servo-mount clamps,
- Racks,
- Cables,
- Mating female connectors.
For further information please contact our technical department.
|
|
Accessories
Connectors, shaft couplings, draw-wire units and measuring wheels are just part of Leine&Linde's line of accessories. Accessory cables, connectors and all the other accessories that can be used in an application should always maintain the same high quality as the encoders Leine&Linde deliver. The best way to guarantee that the accessories are of this high quality is to use only accessories that have been verified regarding operation and performance and are offered as Leine&Linde accessories.
|
|
PU210: Programmable Level Converter, Potential Separator and Direction Translator
Signal inputs A, /A, B, /B, Z, /Z adjustable to TTL/RS422 level or to HTL (10-30V) level
Signal outputs A, /A, B, /B, Z, /Z (push-pull), output level depending on remote voltage (Vext. = 5 - 30V)
Potential separation between input and output by high-speed coupler
Suitable for conversion of a A/B quadrature direction signal to a static direction signal and vice-versa
Connection by choice via SUB-D-connector or via screw terminal strips
(parallel circuit)
|
|
Glass scale gratings are available in a variety of configurations. They are intended for applications where the user provides the scanning unit and the electronics to create a customized measuring or detection system. The quality glass gratings are available as linear scales up to 3400 mm length, as disco shaped scales with diameters up to 400 mm, or in special geometric configurations.
Material
Substrate material selected float glass
Thickness of substrate 1; 1,5; 2,0; 2,5; 3; 4; 5; 6 mm.
Tolerance of glass thickness ±0,1 mm
Length/ width diameter tolerance ±0,1 mm
Planarity 10 µm / 100 mm
Coefficient of thermal exponation 8x10-6/K
Coating vacuum deposited chrome
- Transmission < 1% at 400-900 nm
- Reflection ≤ 60% at 400-900 nm
Pattern:
-sputtered chrome on glass
-line tolerance max. ±10%
-graduation accuracy < ±2"( n200mm) , ±15"( n20 mm)
-coaxiality graduation to outside diameter < 0,2 mm (DIN7184)
|
|
Accessories
Connectors, Measuring Wheels, Couplings, Adaptor Flanges, Mounting Brackets
|
|
In addition to our encoder range, we market a wide range of mechanic and electronic accessories like :
- flange, coupling, DAC, etc...
- Digital displays for encoders : measures and display of angular position, linear movements, linear and rotation speed, differential scale function, signal processing devices : multi-channel amplifiers, D/A converters etc...
|
|
| ... products without technical information |
| |
|
|
