|
|
|
Polycrystalline diamon end mills for optimal tool life especially for aluminium, graphit, composite and glassfibre materials.
|
|
|
|
|
|
HAM offers a large range of standard tools for multiple cutting tasks for the industrial consumer. Our variety of products covers end-mills with a special cutting geometry for Aluminium as well as end-mills for hardened material, which gradually reduce the need for electrical discharging processes in mould and die industry. With HAM´s standard tools it is possible to machine hardened steel up to 63 HRC without problems and economically. We have also developed a special line of tools designed for use of minimum lubrication or dry machining.
HAM is permanently trying to improve the quality of the carbides in close cooperation with its suppliers. Our engineers test and retest the coatings of the tools in our technology centre in order to achieve the best suitable solution.
To be recognized as a system supplier that serves complete solutions, HAM has enlarged its product range with brazed and indexable tools. These products are offered as standards or as specials tools according to customer drawing.
|
|
|
|
|
|
Solid carbide end milling for high efficiency machining for aluminium alloys.
Mitsubishi’s range of solid carbide end mills includes the Alimaster series, designed specifically for high efficiency milling of aluminium alloys.
Development of the range has progressed by using and optimising the micro grain carbide substrate together with the latest ideas in flute and cutting edge geometry. This ideal combination has been proven over time and has enabled Alimaster to gain an advantage in today’s ultra competitive aerospace market.
The full range includes long and short series end mills for slotting and general milling, 3 flute roughing types available in various flute lengths and a ball nose type to ensure a huge range of applications are covered. The newest addition to the series includes a 2 flute corner radius type Ø3 –Ø20.
In addition to the regular series, modified standard cutters can be re-engineered for customer specific uses. Typical examples include through coolant and corner radii that match typical components such as wing ribs.
|
|
|
|
|
|
Seco Tools' Jabro products are high quality, solid carbide end mills found in a variety of high-tech industries including mould & die, aerospace, medical, power generation and general machining.
Our Tornado tools are perfect for high speed machining, while Diamond coated tools should be used for graphite machining and the Mini tools for the smallest of components.
The Seco Jabro Assortment:
TORNADO
A complete range of peak performance coated end mills specially developed for High Speed Machining (HSM) with a diameter range of 2-20 mm in various geometrical styles.
HPM
A range of solid carbide tools specially developed to achieve high metal removal rates in different materials. Diameter range from 2 mm to 25 mm.
HFM
A range of solid carbide tools for High Feed Machining. Diameter range from 1 mm to 12 mm.
MINI
Miniature "MEGA-64-T", Mega-T" and "Diamond" coated end mills with a diameter range from 0.1 mm (.0039") to 2.0 mm (.0590")
DIAMOND
Solid carbide end mills with Chemical Vapour Deposition (CVD) "Diamond" coating for machining abrasive materials like graphite. Diameter range from 0,2 mm up to 12 mm.
VHM
A complete range of universal solid carbide end mills. Diameter range from 1 mm to 32 mm.
|
|
PCD:
For working with aluminium with a high silicon content, non-ferrous metals, CFK and GFK materials as well as compound materials like glare.
CBN:
For working with carbon rich and hardened steels.
We produce optimal milling tools, complete and according to your requirements. Together we determine your tool requirements and produce them exactly according to specifiations. The milling, production and material is determined by your working requirements. We balance and shrink fit your milling tools on request.
|
|
|
We supply DIN ANSI standard HSS and carbide end mills with bright, tin-coated, ticn-coated, tialn coated finish in metric and inch sizes center cutting or non center cutting like ball nose, double end, T-SLOT milling cutter, 2 3 4 6 8 flutes, packing in plastic box or metal box, wooden case etc as per your needs. Shank: flatted, screw, straight shank, taper shank etc.
|
|
ZX-coated solid carbide endmill
Solid carbide endmill
Brazed endmill
Indexable endmill
SUMIDIA / SUMIBORON endmill
|
|
Introducing our new series of 2 flute, solid carbide, “Toroid” style end mills. Designed primarily for the Die/Mold industry, these tools are capable of machining hardened tool steels up to 62 HRc. The new TM Series design uses distinctive carbide grades, high accuracy geometries, and application specific coatings to achieve phenomenal cutting speeds for roughing and finishing of 3-D die/mold cavities. Toroid style tools are used for helical boring and allow for wider step-overs on flat floors. Recent tests performed with these tools have shown reduction in total process time of up to 500%. These new end mills are available in both standard and metric sizes.
Features
# Multi-Flute “Tuffy” Grade, Bull Nose Style End Mills
# Application Specific Geometries and Coatings
Recommended for High Speed, Hard Metal, Milling Applications
# For semi-finishing and finishing flat floors and straight walls
|
|
The new Protostar Flash is a high-performance tool for economical roughing in the 2.5D and 3D range with low cutting depth and very high feed rates. It is suitable for machining alloyed and unalloyed steels.
Extremely tough: the new Protostar Qmax with optimised geometry for maximum material removal rates in sophisticated materials.
Protostar Flash
The all-new end face geometry enables significantly higher tooth feed rates fz for faster material removal rates
High-quality TiAlN coating for maximum tool life
Since cutting takes place exclusively on the end face of the tool, the machine spindle is subjected almost only to axial forces that are easily absorbed
Protostar Qmax
Solid carbide milling cutter with knurled splines reduces cutting forces and generates short chips
Internal cooling aids chip removal and increases process reliability
Very good roughed surface due to improved roughing profile
All tools have the latest TiAlN coating offering advantages for dry and wet machining
|
|
Roughing cutters, ball nose
- Helical teeth with threaded and form relieved chip breaker - Fine pitch
- Straight shank and drive flat
- Two end tooth cutting up to the centre
|
|
|
For Maximum Stock Removal in Milling Operations on Mild Steel, Steel Alloys, Stainless Steel and Cast Iron...Fractional and Metric.
|
|
Roughers, or “hoggers”, are useful for rapid removal of large amounts of material. The chip groove design allows for more cutting fluid to the cutting edge and dissipates heat better. There is a wide range of variations in rougher profile forms for different material groups. The coarser the pitch of the roughing edge, the more material removed and the less smooth the finish. In addition, most roughers have eccentric relief so regrinding can be done only using the cutting face. This saves you if you have access to regrinding equipment.
Series 621 - Fine Pitch Roughers (.048 Pitch)
Series 620 - Medium Pitch Rougher (.062 Pitch)
622 - Coarse Pitch Roughers (.105 Pitch)
|
|
|
A further expansion to our double helix family is the SSDH-C series. We’ve combined the aggressive roughing geometries of the SSDH series with a truncated knuckle O.D. form. This unique design allows for freer cutting and better chip control while maintaining the work piece surface finishes. These tools are stocked in stub and regular lengths and coated to match your particular application.
|
|
- Medium Hardness Materials
- Plunge and Ramp
- Profile, Slot and Pocket
- High Speed Steel
- 30° Right Hand Helix, Right Hand Cut
- Geometry Provides Roughing Benefits with Good Part Finish
- Heavy Core for Rigidity
- Cutting Diameter Tolerance is +.003/-.000
- End Mills with 2" Diameter Shanks Furnished with Fast-Lok® Dual Drive Feature
- Steam Oxide Treatment to Retard Galling
- Pat. No. 4.721,421
|
|
SERF (Sinusoidal Edge Rougher Finisher) design provides the benefits of a roughing mill with the edge quality of a finishing mill in a Polycrystalline Diamond double-flute tool on solid-carbide body.
The unique SERF geometry results in reduced impact forces during the cut resulting in longer tool life, less cutting force, greater feed rates and reduced noise.
Edge finish in fibrous composite materials is improved due to the overlapping sinusoidal edge pattern which is designed to impart a fiber shearing action during the cut.
Usage: Carbon Fiber, G-10 and other Fiberglass
|
|
|
|
|
|
WELDON 2AR Rougher:
Our 2AR is designed for roughing non-ferrous materials where the application demands a high metal removal rate.
The 2AR tools come standard with a corner chamfer for aggressive speeds and feeds. We have combined a highshear, 40 degree helix with a cylindrical margin for chatter resistant, smooth machining in all non-ferrous materials. While primarily a roughing tool, the 2AR can also handle
finishing applications.
The 2AR is available from stock as a bright tool or with Zirconium Nitride (ZrN) and Titanium Carbonitride (TiCN) coatings for improved performance and extended tool life. Special quotes and non-stocked coatings are available upon request.
WELDON 3SR Rougher:
This three flute, premium carbide tool is designed specifically for roughing operations in steel and ferrous alloys. A full eccentric primary grind, standard corner chamfers and a 40 degree flute helix ensure excellent chip evacuation, corner protection and superior metal removal rates. The 3SR is
particularly well suited to roughing and rough slotting. Aluminum Titanium Nitride (AlTiN) and Titanium Carbonitride (TiCN) coated tools are all available from stock in stub and standard lengths. Special quotes and non-stocked coatings are available upon request.
|
|
The CoroMill 390 endmill offers precision performance in a class of its own. In many ways, the CoroMill 390 is the first high-precision indexable endmill. Playing in the same league as solid endmills.
The CoroMill 390 produces mirror finish surfaces and true 90° shoulders. Noise and vibration are reduced to a very low level.
|
|
High Speed Steel
R.H. Cut, R.H. Helix & L.H. Cut, L.H. Helix (20 degree)
These mills are for slabbing or for surfacing cuts, either end milling or face milling.
|
|
FRANKEN Micro-Line end mills
The Micro end mills are available as end mills, ball-nose and torus end mills in solid carbide K5-20FH, un-coated and TiAlN-coated. The diameter range is 0,2 - 2 mm for the end mills and ball-nose end mills, and 0,5 - 2 mm for the torus end mills. The Micro-Line end mills are available in three lengths, short (2.2 x d), long (5 x d) and extra long (10 x d).
|
|
| ... products without technical information |
| |
|
|
