|
|
The Gen2 series diese1 powered6- 8ton range with the invincible combination of a 100 HP engine, automatic 3 stage transmission, wet disc brake and rugged chassis design provides the most exceptional performance, manoeuvrability and durability of its class.
lveco IOOHP, 4 professional cylinder, 4.5 liter, turbocharged, M5-MNS professional diesel engine realizes an exceptional output and torque as well as fuel economy, while meeting all EPA and European emission regulations.
Reliable ZF full automatic transmission equipped with a self-diagnostic electronic system and separately linked durable drive axle optimized for the C60/70/800 results in smooth but powerful driving in any application. Fully enclosed, long lived wet disc brake also maximizes productivity by its consistent performance.
Easy-to-read colour TFT LCD display provides not only real time information and error codes for the truck through a CAN bus system but also controls various functions to optimize the truck for the operator’s demands. |
|
| The FKS Series is a heavy-duty, cushion-tire forklift with the power to lift loads up to 100,000 pounds. The compact design allows the forklift to maneuver in tight areas. The FKS Series is extremely durable and can be used in many applications such as paper, forging, steel, die/mold and canning. There are various cab options available including tilt, air-ride and enclosed cab. |
|
| The Titan Series is a compact and highly maneuverable cushion-tire forklift that is used in industries such as paper, steel, beverage and automotive. With a capacity range of 18,000 - 22,000 pounds, the Titan Series features advanced ergonomics, low-profile counterweight and easy-access panels and hoods. |
|
Platinum II Cushion Series
3,000 - 8,000 lb. Capacities
LPG - Dual Fuel
The Platinum II Series is a reflection of Nissan's continuing commitment to producing products of only the highest value. Featuring the most advanced engine technology available in the industry, these lift trucks provide emission levels well below EPA requirements, and include a wealth of standard and optional features to benefit the operator's need for comfort and control. Combined with Nissan's tradition of rugged, reliable construction, the Platinum II Series has become the new benchmark others must now follow.
|
|
| ... products without technical information |
| |
The economizers exhaust gas boilers GN ECO have been studied to be installed in all types of industrial processes when discharging hot gasses in the atmosphere.
Hot gasses, flowing through the GN ECO are used to heat countercurrent, another fluid utilized in industrial processes, achieving important energy savings while reducing operating costs. |
|
The MX range is a compact and affordable steam boiler ideal for small to medium sized users of process steam.
Each professional boiler is individually tailored to your specific needs and manufactured from start to finish in our own factory, thereby ensuring quality control of the very highest standard. All professional fittings are mounted in the factory to make installation on site as quick and easy as possible.
The boiler can incorporate any make of industrial burner to suit a wide range of gaseous or liquid fuels in single, dual or tri-fuel combinations.
The MX boiler has a thermal efficiency in excess of 89% (based on NCV) .
External surfaces are well insulated and finished in tough, Aluzinc cladding.
The front professional door is lined with the latest ceramic fibre technology offering significantly less heat loss than traditional refractory materials.
The MX range has larger heating surfaces and steam space than comparable boilers, meaning desirable low heat transfer rates, Low NOX emissions, easily achievable outputs, and quality dry steam throughout the firing range.
A huge range of accessories are available to further enhance the boiler; contact us for more details.
Manufactured to BS2790 Class 1 with outputs to 3MW (5000 kg/hr) and operating pressures to 17 bar(g) |
|
The OPRA Generator set manufacturer is the best solution in the 2MW electrical power range to produce steam:
-High Turbine exhaust temperatures
-High exhaust flow
-High Overall efficiency |
|
| ... products without technical information |
| |
Dynetek Industries Ltd. designs and manufactures a lightweight Bulk Transport (BT) System for efficient transport of compressed natural gas (CNG) and other compressed gases. These BT-systems allow cost effective development of gas markets, and an Instant Infrastructure(R) by making CNG immediately accessible to end-users.
The unique storage advantage of the BT-System lies in the use of Dynetek's Dynecell (R) cylinders, a seamless, thin wall aluminum liner covered with a full professional carbon fiber overwrap. The Dynecell professional cylinder is non-permeable and exhibits limited expansion under pressure and temperature changes.
For more information visit www.dynetek.com |
|
Dynetek Industries Ltd. designs and manufactures Advanced Lightweight Fuel Storage Systems(R) for compressed natural gas (CNG), compressed hydrogen and technical gases.
The core technology of the system is the DyneCell(R) composite professional cylinder made from a seamless, thin wall aluminum liner covered with a full carbon fibre overwrap. DyneCell cylinders are extremely lightweight and are used in various applications around the world.
For more information visit www.dynetek.com |
|
To fill the tank with your machines or vehicles, do not waste any more time, choose a practical, reliable and autonomous delivery system.
Capacities: 1000,1500 and 2000 liters.
Other galvanized steel mobile versions, 400,600 and 980 liters.
|
|
| ... products without technical information |
| |
| Our systems for gas permeability measurement for plastic and rubber samples have simplicity, excellent selectivity, high sensitivity and wide dynamic range. The measurable permeating components include water vapor, hydrogen-sulfide, methane, ethane, carbon-dioxide, BTEX (Benzene, Toluene, Ethyl Benzene and Xylene), ammonia etc. There are two basic forms of our systems; the first one, which is based on photoacoustic industrial gas detection, is optimal for measurements at normal pressure and temperatures up to 120 ° C. The second one, which is based on photothermal beam deflection method, can be used also at extreme pressures (up to 1000 bar) and also at high temperatures. An outstanding feature of our system is that due to the very high dynamic range of the measuring method, it is possible to fit numerically the early part of the permeation curve, which results in a considerable reduction of the measurement time |
|
| The FlowSorb III is an entry-level single-point and multipoint BET surface area instrument. The FlowSorb measures surface area using the flowing gas method, which involves the continuous flow of an adsorptive and inert gas mixture over the sample at atmospheric pressure. It is ruggedly constructed and ideal for demanding analytical environments. |
|
Micromeritics introduces the TriStar II 3020, a fully automated, three-station surface area and porosity professional analyzer capable of increasing the speed and efficiency of quality control analyses, with the accuracy, resolution, and data reduction to meet most research requirements. The three analysis ports operate simultaneously and independently of one another. For additional throughput, four TriStars can be operated with one computer. The speed and accuracy of the Tristar II make it an ideal instrument for a wide variety of applications that include pharmaceuticals, catalysts, carbon, cosmetics, paints, pigments, geoscience, industrial fuel cells, high-tech ceramics, and much more.
The new TriStar II features a dedicated Po port, allowing the measurement of saturation pressure on a continuous basis. A 2.75-liter Dewar and extended length sample tubes allow complete adsorption and desorption isotherms to be collected without operator intervention. The TriStar II can collect up to 1000 data points. Fine details of the isotherm can be observed and recorded providing high resolution and revealing pore structure details. The instrument also features a krypton option, allowing precise measurements in the very low surface area range.
The TriStar II also combines versatility in analysis methods, data reduction, and reporting to allow the user to optimize analyses to specific applications. Reports include adsorption and desorption isotherms, BET surface area, mesopore pore size and area distributions, Statistical Process control (SPC), new isotherm and thickness models, isosteric heat of adsorption, and integrated DFT models. |
|
| ... products without technical information |
| |
| ... products without technical information |
| |
|
|
see the results for the following category
