|
|
| Diesel and LPG multidirectional forklift truck, equipped with three directional traction wheels, can moves indifferently in all directions, ensuring manouvring, stocking and travelling high performances. It is very good to be used for in and outdoor works and for narrow lanes and places |
|
The 7FGD series is a multipurpose truck, designed for light, medium and heavy weights and movement, single and multiple loads and inside and outside use.
It offers the perfect blend of productivity, safety and comfort making it one of the soundest investments one can make. The choice of a dedicated LPG engine allows productivity whilst reducing exhaust emissions.
|
|
The Bendi IC
Almost everything that makes the battery-powered Bendi the right choice for so many applications applies equally to the Bendi IC. Both are equally at home on the loading dock, or in the warehouse. Both can go from trailer to plant floor to narrow aisle storage without staging. Both navigate narrow aisles with the speed and agility that allow Bendi operators to move safely into tight spots others can't reach. The main difference is that our LP-Powered Bendi can be refueled in less than 5 minutes.
This narrow aisle forklift features a GM Vortec 3000 internal combustion engine designed specifically for LP gas. Refilling or removing and replacing the rear-mounted LP tank is easy, fast, and safe. The 3.0 liter four-cylinder engine is easily accessible under the insulated seat base. The engine is rated at 67hp at 2400rpm, and meets or exceeds emission standards for its vehicle class in all 50 states.
The Bendi IC measures just 48" (1200mm) wide, can climb 15% grades, turn in 9 foot (2.74m) intersecting aisles, and stack 48"x40" (1200mm x 1000mm) loads in 6-1/2 foot (1.98m) aisles.
|
|
The industry's first 4-way internal combustion forklift truck has employed innovative designs in engineering, control technology and ergonomics allowing for superior operator comfort, efficiency and maneuverability. Available in both LPG/Gas, Diesel and electric/ battery powered engines, the Combilift offers a range of lift models and capacities from 2,000kgs to 14,000kgs and lift heights to 7.5 meters.
|
|
| The FKS Series is a heavy-duty, cushion-tire forklift with the power to lift loads up to 100,000 pounds. The compact design allows the forklift to maneuver in tight areas. The FKS Series is extremely durable and can be used in many applications such as paper, forging, steel, die/mold and canning. There are various cab options available including tilt, air-ride and enclosed cab. |
|
| The P-Series is a compact, heavy-duty pneumatic forklift designed to stand up to demanding applications in industries such as steel, concrete and breakbulk. The solid chassis, AxleTech planetary drive axle and robust steer axle are just a few of the components that make the P-Series the most durable forklift on the market. The low-profile counterweight allows for excellent visibility and unmatched maneuverability. The P-Series has a capacity range of 22,000 - 100,000 pounds. |
|
| The Titan Series is a compact and highly maneuverable cushion-tire forklift that is used in industries such as paper, steel, beverage and automotive. With a capacity range of 18,000 - 22,000 pounds, the Titan Series features advanced ergonomics, low-profile counterweight and easy-access panels and hoods. |
|
| Combilifts' product range offers a variety of solutions to answer your material handling needs. Our product range can be customized to meet your particular requirements and offer the best possible solution for your needs. |
|
| The P-Series is a compact, heavy-duty pneumatic forklift designed to stand up to demanding applications in industries such as steel, concrete and breakbulk. The solid chassis, AxleTech planetary drive axle and robust steer axle are just a few of the components that make the P-Series the most durable forklift on the market. The low-profile counterweight allows for excellent visibility and unmatched maneuverability. The P-Series has a capacity range of 22,000 - 100,000 pounds. |
|
GO HIGH, REAL HIGH, WITH HYUNDAI
Ready for a good stretch? The Hyundai Forklift Trucks are rugged,
productive, lean-and-mean lifting machines.
Designed for the European market, it delivers optimum
productivity, reliability and comfort in a robust, user-friendly
package. The first thing you will notice is its simplicity:
nowhere will you find a machine that’s easier to operate.
Easy to maintain, and versatile in usage, it’s the field partner that
will never let you down.
Bigger cabin space ensures your easy and swift operation.
Join the winning team and feel the power, with the Hyundai
Forklift Trucks.
Prepare to go high, real high!
|
|
Side loader with Diesel engine for handling of long and bulky materials either inside or outside.
Very easy to operate, allows exact placing of load,high speed manouevring due to hydrostatic transmission with a variable capacity pump.
The good visibility from the cab with exceptional steering permit the driver to operate easily and in total safety.
HT3KU
Capacity (kg): 3000
Fork Length (mm): 1000/1200/1400
Load Center (mm): 500/600/700
HT4KS - HT5KS
Capacity (kg): 4000 - 5000
Fork Length (mm): 1200/1400
Load Center (mm): 600/700
HT6UP - HT7UP
Capacity (kg): 6000 - 7000
Fork Length (mm): 1400/1600
Load Center (mm): 700/800 |
|
Hydrodynamic power shift or LPG.
HT4C and HT5C
Capacity (kg): 4000-5000
Fork Length (mm): 1200/1400/1600
Load Center (mm): 600/700/800
Tyres: Pneumatic 27 X 10-12 or 250-15
Engine: Perkins 1104D-44T Turbo 62.5 kW a 2200 rpm
Transmission:Hydrodinamic Graziano PST2
HT6PS and HT7PS
Capacity (kg): 6000-7000
Fork Length (mm): 1200/1400/1600
Load Center (mm): 600/700/800
Tyres: Pneumatic 300X15
Engine: Perkins 1104D-44T Turbo 62.5 kW a 2200 rpm
Transmission:Hydrodinamic Graziano PST2
HT8
Capacity (kg): 8000
Fork Length (mm): 1400/1600
Load Center (mm): 700/800
Tyres: Pneumatic 12.00x20
Engine: Perkins 1104D-44T Turbo 74,5 kW a 2200 rpm
Transmission:Hydrodinamic DANA-CLARK 20000
HT10
Capacity (kg): 10000
Fork Length (mm): 1400/1500/1600/1800/2000
Load Center (mm): 700/750/800/900/1000
Tyres: Pneumatic 12.00x20
Engine: Perkins 1106D-E66TA Turbo 95 KW 2200 RPM
Transmission:Hydrodinamic DANA-CLARK 20000
HT12
Capacity (kg): 12000
Fork Length (mm): 1400/1500/1600/1800/2000
Load Center (mm): 700/750/800/900/1000
Tyres: Pneumatic 12.00x20
Engine: Perkins 1106D-E66TA Turbo 95 KW 2200 RPM
Transmission:Hydrodinamic DANA-CLARK 20000
HT15
Capacity (kg): 15000
Fork Length (mm): 1500/1600/1800/2000/2500
Load Center (mm): 750/800/900/1000/1250
Tyres: Pneumatic 14.00x24
Engine: Perkins 1106D-E66TA Turbo 129 KW – 2200 rpm
Transmission:Hydrodinamic DANA-CLARK 32000
HT20 and HT25
Capacity (kg): 20000 - 25000
Fork Length (mm): 1500/1600/1800/2000/2500
Load Center (mm): 750/800/900/1000/1250
Tyres: Pneumatic 16.00x25
Engine: Perkins 1106D-E66TA Turbo 129 KW – 2200 rpm
Transmission:Hydrodinamic DANA-CLARK 32000 |
|
The industry's first 4-way internal combustion forklift truck has employed innovative designs in engineering, control technology and ergonomics allowing for superior operator comfort, efficiency and maneuverability. Available in both LPG/Gas, Diesel and electric/ battery powered engines, the Combilift offers a range of lift models and capacities from 2,000kgs to 14,000kgs and lift heights to 7.5 meters.
|
|
| The Titan Series is a compact and highly maneuverable cushion-tire forklift that is used in industries such as paper, steel, beverage and automotive. With a capacity range of 18,000 - 22,000 pounds, the Titan Series features advanced ergonomics, low-profile counterweight and easy-access panels and hoods. |
|
Platinum II Cushion Series
3,000 - 8,000 lb. Capacities
LPG - Dual Fuel
The Platinum II Series is a reflection of Nissan's continuing commitment to producing products of only the highest value. Featuring the most advanced engine technology available in the industry, these lift trucks provide emission levels well below EPA requirements, and include a wealth of standard and optional features to benefit the operator's need for comfort and control. Combined with Nissan's tradition of rugged, reliable construction, the Platinum II Series has become the new benchmark others must now follow.
|
|
| The Titan Series is a compact and highly maneuverable cushion-tire forklift that is used in industries such as paper, steel, beverage and automotive. With a capacity range of 18,000 - 22,000 pounds, the Titan Series features advanced ergonomics, low-profile counterweight and easy-access panels and hoods. |
|
CAPACITY: 22,000 LBS. - 35,000 LBS.
PNEUMATIC TIRE: EX20 SERIES
A clean, quiet, direct-injection diesel engine that boosts the highest power and torque in its class.
Exceptionally high travel speed achieved through use of electrically controlled forward/reverse lever and 3-speed transmission (or optional automatic transmission).
Fully hydraulic braking, responsive to pedal depress force.
Top-of-class rated lift speed ensures speedy and efficient work.
A high-rigidity frame for enhanced durability and load-handling performance.
Highly rigid mast construction t ensure reliability.
Greatly enhanced front/rear visibility achieved by improved top of the counter weight shape and expanded inner width of the mast.
Komatsu's original Hydraulic Suspension Cab (HSC) mount provides the ultimate in operator comfort even during extended operation.
Ambient - and operator-friendly low-noise design; complete sound insulating measures.
New operator's suspension seat.
Integrated, easy-to-read meter panel to ensure safe operation.
Tiltable steering wheel for operator comfort.
Combination switch headlamp and directional indicator (auto-return).
Large capacity fuel tank for less frequent fueling; easy-to-see windows for fuel and oil tank inspection.
High serviceability: non-bolted floor plates and side covers and quick-open/close engine hood.
Air cleaner with automatic dust ejector to prolong replacement cycle.
Reserve tank for maintaining engine coolant at a constant level (thus eliminating troublesome refilling).
|
|
CAPACITY: 2,000 kg - 3500 LBS.
PNEUMATIC TIRE: BX50 SERIES
K21 and K25 industrial engines exceed EPA Tier 2
emission standards and provide high torque at
low RPM for power with fuel economy.
"Komfort Zone" dual Floating structure uses drive-train cushion mounts and suspension compartment mounts
to isolate the operator compartment from engine, floor, and road vibrations.
Large, open step area with traction surface, large entry handgrip, and wide-open floor space provide easy entry and exit from the "Komfort Zone" operator compartment.
"EZlift" Hydraulic System with tandem pump
provides fast and controllable lifting speed at low
engine RPM.
"EZview" mast for exceptional visibility.
|
|
CAPACITY: 22,000 LBS. - 35,000 LBS.
PNEUMATIC TIRE: EX20 SERIES
A clean, quiet, direct-injection diesel engine that boosts the highest power and torque in its class.
Exceptionally high travel speed achieved through use of electrically controlled forward/reverse lever and 3-speed transmission (or optional automatic transmission).
Fully hydraulic braking, responsive to pedal depress force.
Top-of-class rated lift speed ensures speedy and efficient work.
A high-rigidity frame for enhanced durability and load-handling performance.
Highly rigid mast construction t ensure reliability.
Greatly enhanced front/rear visibility achieved by improved top of the counter weight shape and expanded inner width of the mast.
Komatsu's original Hydraulic Suspension Cab (HSC) mount provides the ultimate in operator comfort even during extended operation.
Ambient - and operator-friendly low-noise design; complete sound insulating measures.
New operator's suspension seat.
Integrated, easy-to-read meter panel to ensure safe operation.
Tiltable steering wheel for operator comfort.
Combination switch headlamp and directional indicator (auto-return).
Large capacity fuel tank for less frequent fueling; easy-to-see windows for fuel and oil tank inspection.
High serviceability: non-bolted floor plates and side covers and quick-open/close engine hood.
Air cleaner with automatic dust ejector to prolong replacement cycle.
Reserve tank for maintaining engine coolant at a constant level (thus eliminating troublesome refilling).
|
|
CAPACITY: 7.5t - 9.0t
PNEUMATIC TIRE: DX20 SERIES
The most rigid mast frame in its class.
A reliable hydraulic system - even under extreme conditions.
Careful design extending to chassis details.
Powerful and clean.
Superior loading and unloading for higher operating efficiency.
Improved travel and breaking performance.
Excellent front and rear visibility.
Easy maintenance.
Reliable, light-touch operating system.
Low noise and vibration for a comfortable operating environment.
Ensuring a high level of safety.
CAPACITY: 4.0t - 5.5t
PNEUMATIC TIRE: CX20 SERIES
The TB45E gasoline and Komatsu S6D102E diesel industrial engines delivers exceptional power, emission control, and reliable operation for enhanced productivity and fuel efficiency.
Suspension compartment (SC) greatly reduces operator fatigue by isolating the compartment from engine and traveling vibrations.
Swing up engine bonnet and lift out floor plate provide quick access for daily checks and maintenance.
Open perforated steps and assist hand grip makes entry and exit easier.
Dash display provides easy to read information to the operator and maintenance personnel.
|
|
| The P-Series is a compact, heavy-duty pneumatic forklift designed to stand up to demanding applications in industries such as steel, concrete and breakbulk. The solid chassis, AxleTech planetary drive axle and robust steer axle are just a few of the components that make the P-Series the most durable forklift on the market. The low-profile counterweight allows for excellent visibility and unmatched maneuverability. The P-Series has a capacity range of 22,000 - 100,000 pounds. |
|
Pneumatic Series Trucks
3,000 - 15,500 lb. Capacities
Gas - LPG - Dual Fuel - Diesel
Rugged, reliable trucks that deliver powerful performance you can depend on are the trademarks of every one of Nissan Forklift's pneumatic tire lift trucks.
From Nissan's groundbreaking new series of Platinum II trucks, redesigned from the ground up to incorporate the latest technological advances for enhanced fuel and work efficiency - to the versatility of our exclusive Platinum II Nomad models - and extending to our series of heavyweight pneumatics, Nissan produces a range of model capacities with exceptional features to fit your specific needs.
|
|
| The FKS Series is a heavy-duty, cushion-tire forklift with the power to lift loads up to 100,000 pounds. The compact design allows the forklift to maneuver in tight areas. The FKS Series is extremely durable and can be used in many applications such as paper, forging, steel, die/mold and canning. There are various cab options available including tilt, air-ride and enclosed cab. |
|
FO4 Series Heavyweight Pneumatic Trucks
8,000 - 11,000 lb. capacities
Gas - LPG - Dual Fuel - Diesel
Productivity thrives when you have exceptional performance. Nissan's FO4 Series offers key productivity advantages including powerful performance with exceptional fuel efficiency, a spacious and comfortable work area for the operator, and manufactured for rugged dependability.
Proven Performance & Efficiency
Powered by Nissan's own TB45 in-line, 6-cylinder engine, these trucks deliver outstanding performance and reliability across a range of tough applications. Using an electronic fuel injected system, which constantly analyzes, then optimizes engine operation, the TB45's gas, LPG and dual fuel options result in enhanced productivity through high combustion efficiency. (6-cylinder diesel engine also available.) |
|
FO5 Series Heavyweight Pneumatic Trucks
15,500 lb. capacity
Diesel
This Nissan heavyweight is known for its reliability.
Its durable and rugged design, Nissan's own powerful FE6 diesel engine, along with a 2-stage stator torque converter give you an unbeatable combination of performance, comfort and efficiency.
More Power. More Productivity
Nissan's FE6 diesel engine incorporates a direct fuel injection system allowing this engine to deliver substantial horsepower with impressive fuel economy - the perfect choice if you're looking for enhanced productivity and cost savings in your operation.
Extra Comfort. Extra Control.
Productivity and efficiency can only be achieved if your operator has the right tools for the job. That's why all FO5 Series trucks are equipped with hydrostatic power steering to keep fatigue at a minimum during those long workdays. Its spacious compartment includes a smart instrument layout, tilt steering and ample seat adjustments so your operator can be comfortable and confident.
Nissan Reliability. Nissan Quality.
Along with the type of engineering that promises unsurpassed performance and productivity, FO5 Series lift trucks are designed with features that facilitate faster maintenance, offer uncompromising vehicle comfort and control and deliver years of dependable service for your operation. |
|
The 5FD series is a multipurpose truck, design for heavy product weights and movements, single and multiple loads and inside and outside conditions.
It offers the perfect blend of productivity, safety and comfort, making it one of the soundest investments one can make. The choice of a dedicated Toyota LPG engine allows you to maximise productivity whilst reducing exhaust emissions.
|
|
GO HIGH, REAL HIGH, WITH HYUNDAI
Ready for a good stretch? The Hyundai Forklift Trucks are rugged,
productive, lean-and-mean lifting machines.
Designed for the European market, it delivers optimum
productivity, reliability and comfort in a robust, user-friendly
package. The first thing you will notice is its simplicity:
nowhere will you find a machine that’s easier to operate.
Easy to maintain, and versatile in usage, it’s the field partner that
will never let you down.
Bigger cabin space ensures your easy and swift operation.
Join the winning team and feel the power, with the Hyundai
Forklift Trucks.
Prepare to go high, real high! |
|
| Sectional load : 450 kg (3 people) or 230 kg (2 people) Fly jib horizontal (150°) and vertical (140°) arc movement Max 65ft 7in (20 m) horizontal outreach. Gradeability up to 40%. Hydraulic differential lock and 15 in (38 cm) ground clearance for improved rough terrain. Continuous 360° turntable rotation. Proportional and simultaneous controls for higher speed and accuracy. Robust, reliable and easy to maintain design. |
|
The Drexel "R" series was designed for the military to move both pallets and missiles. The R40/R60, with pneumatic tires, are unique in the world of forklift trucks. They work on practically any improved surface and also climb ramps - 15% RAMPS. As very narrow aisle (VNA) machines, they can operate in 6-8 foot aisles with most pallet loads. They can also transport and store long loads. Landoll presently has over 8,400 machines in operation with an increasing world-wide dealer network. Landoll is a supplier to both commercial and military customers around the world. Available with LP gas and diesel. Contact Landoll Corporation today for your forklift needs at US number 800-428-5655 or 785-562-5381 and we can solve your warehouse storage challenges!
**Landoll Corporation is located in Marysville, KS USA specializing in Very Narrow Aisle Forklift solutions for warehousing operations. The Landoll produced Bendi and Drexel SwingMast forklifts provide maximum utilization of storage space by reducing aisle size while still performing the jobs of a front loading forklift. This includes loading and unloading trailers, going from dock to rack, climbing ramps and working in a variety of operations. These trucks stack 60" aisles with lift heights up to 36'. ** |
|
| The Drexel "R" series was designed for the military to move both pallets and missiles. The R40/R60, with pneumatic tires, are unique in the world of forklift | | |