|
|
|
|
|
|
HUMLOG 10 series humidity/temperature data loggers permit the exact and professional recording of humidity and temperature values. Low power consumption and large memory size enable long-term data capture for a wide range of applications.
HUMLOG 10 / HUMLOG 10TSE:
The elegant 2-part housing, which consists of a display module and a plug-in sensor module, enables easy installation and a fast exchange of the sensor unit when service is required.
The current measurement data on the large display is easy to read even from a distance of several metres.
HUMLOG 10THC:
The compact HUMLOG 10THC version does not have a display and is equipped with internal H/T sensors.
Measurement Data - Evaluation & Configuration:
Measurement data evaluation and instrument configuration can be conveniently performed via the serial RS232 interface with a PC or notebook computer by means of the Smartgraph TM 2 software, which runs under MS Windows TM.
Smartgraph TM 2 can display the recorded measurement data in graphical form or as a table. The layout of the display can be individually configured by the user.
|
|
|
|
|
|
Product Guide
Temp. and Humidity recorder TR-71U/TR-72U
Single Temperature datalogger + Timer DTM-317
Daul Temperature datalogger DTM-318
0 °C ~ 50°C+/-3°C; 10 ~ 95% +/- 5%
USB Connection
One Year Continual
Use on One Set of Batteries
Simultaneous Monitoring of Multiple
Channels of Data
High Speed Data Transfer
Large Data Capacity: 8,000 Readings X 2
Channels
Adjustment Function
Accurate, Compact,
Lightweight and Affordable
Easy to Read Multi-Functional Display
Humidity/Temp Meter w/Dual Input
Model : DTM-321/DTM-322
Temp:-20°C ~ 60°C (-4°F ~ 140°F ); K-type:
-200°C ~ 1,370°C (-328°F ~ 2,498°F);
Humidity: 0 ~ 100% RH
4 Digit, Triple display.
K-type Termocouple.
Reading hold °C or °F annunciators.
MAX, MIN. function.
Auto power off.
ÄREL function. (DTM-321)
Automatic low battery indication.
RS-232 computer interface.
RS-232 cable and software for Windows( DTM-
322).
TR-71W Web Temperature Data Logger (USB)
TR-72W Web Temperature / Humidity Data
Logger (USB)
About the TR-7W Series Web Viewer
View Reading on a Cell phone
Recording Settings Monitor Current
Readings
Downloading Recorded Data Graph
Send Warning Messages by E-mail Main
Unit Settings
Wireless Lan Option Brings Flexibility &
freedom
Compact / Lightweight / Water Resistant!
No Switches means No Fuss / No Mistakes /
No Tampering
Wide Temperature Measuring Range:-60°C
to 155°C
Two Types to meet your Needs
Large Data Capacity: up to 16,000 Readings
Battery Life Good for up to
Two Years of Continued Use
Wide Selection of Recording Intervals
|
|
Datalogger ECOLOG TH1
- Connection for 1 integrated (-35°C ..+55°C; 0% ..+100% rH) orup to 2 external humidity and temperature probes (-35°C ..+70°C; 0%..100% rH) orand second temperature probe(-50°C..+140°C)
- Calibrated, exchangeable humidity and temperature probes
- Memory capacity for 64,000 measured values
- Large display with alarm information
- Key pad with 4 keys, external start, alarm reset, measured value and alarm scroll
- 1 digital input
- DB15 multifunction connection with alarm output and RS232
- Direct printout of measured values and alarm data at printer
- Ecolog TH1 with white housing Part No.: 2423-W
- Ecolog TH1 EEX with approval for EEX zone 1
|
|
Data logger HygroGuard 10 / 20
- Complete, battery powered, ready to use data logger system
- Included data acquisition/configuration software
- Included data transmission cable
- High storage capacity of 120'000 data points
|
|
The DRAABE HumSpot steers and supervises the humidification of the individual zones (e.g. different areas, work areas). The simple menu guidance and the lit color display guarantee high convenient operation. Their advantages:
• Point-exact activation of the air moisturizers on falling below of the adjusted dampness desired value
• High measuring precision by digital, capacitive dampness measuring technique
• Permanent status indication of relative dampness and ambient temperature
|
|
| ... products without technical information |
| |
Konica Minolta Sensing is the leading provider of Display Measurement instruments offering a broad range of highly specialised equipment to measure chromacity, luminance, flicker and color uniformity of any modern flat panel display using LCD, Plasma or OLED technology.
Display measuring solutions from Konica Minolta are considered "state of the Art" and are part of quality control devices in the production line of all major Display Manufacturers on a global scale.
|
|
|
|
|
|
The DTS 500 positioning system complements the operation of Instrument Systems spectrometers by providing a route to full automation of measurements. The positioning system is in particular suitable for determining viewing angle dependent properties and spatial homogeneity of display, panel graphics and LED lamp modules. The DTS 500 saves valuable time by eliminating manual alignment and guarantees more exact results with improved reproducibility. Operation of the entire 5-axis system is fully integrated into the SpecWin Pro software. Measurement results can be viewed as luminance and contrast distributions in Cartesian or spherical coordinates with ISO contours lines. Data can additionally be exported in table format to Excel.
The DTS 500 is available in various configurations:
- stand alone XYZ positioning system (e.g. for testing back-lit display and control elements for the automotive and aviation industries)
- stand alone 2-axis goniometer (e.g. for measuring the spatial radiation pattern of lamp modules)
- complete 5-axis system mounted on an optical bench (e.g. for testing LCD displays and entire instrument clusters)
- optional mountings for TOP 200, LumiCam 1300 and LumiCam 4000 available
|
|
CA-100Plus has higher speed, higher performance, and lower cost than its predecessor, the CA-100, which has been a standard of the CRT manufacturing industry since 1990.
Engineered for both bench top and production floor use, and fully compatible with data from the earlier CA-100 model, the new Minolta CA-100Plus CRT Color Analyzer provides higher speed (maximum 20 times/second), as well as Luminance and Chromaticity measurements with a new low luminance capability to 0.05cd/m2, making it suitable for measurement of gamma characteristic and contrast adjustment. The CA-100Plus is equipped with 100 memory channels. Up to 5 sensing probes can be used for simultaneous multiple point measurement. A USB interface connects the CA-100Plus to a computer, and the NEW Software Development Kit makes it easy to use Visual Basic or Visual C to automate measurement and adjustment factors.
|
|
Mii 2 mobile Color Analyzer PR0084
With the Mii 2 mobile Color Analyzer PR0084 acts it around a highly precise and highly sensitive color measuring system for the calibration of monitors. In the scope of supply a software is already contained, additional for on-line colorimetry is software for monitor calibration available.
Technical data:
Detector XYZ (CMF) silicone photo Cell
Optics 2 degrees of opening angles
Measuring range Luminanz: 0,05 to 3.000 cd/qm
Chromaticity: 0,05 to 500 cd/qm
Genauigkeiten* Luminanz: +-2% 1 digit (1 ~3,000cd/m2)
Chromaticity: +-0,002 Illuminant D65
Chromaticity: +-0,0025 CCT 4000-15000K
Chromaticity: +-0.0065 for other colors
Interface USB 2.0
Current supply of 4.7 to 5,5V DC over USB plugs
Measuring speed of max. 10 Messungen/s for low sensitivity
Max 4 Messungen/s for high sensitivity
Temperature compensation 20 to 40 degrees
|
|
|
The CA-210 LCD Color Analyzer is Konica Minolta's "next generation" color analyzer designed to measure color luminance, gamma characteristic and flicker on various types of Flat Panel Displays including LCD and EL. Faster than previous generation analyzers, the CA-210's measurement of luminance and chromaticity at up to 20 times/second makes it ideal in high production environments. (AND it can simultaneously measure up to five points on the screen. ) The CA-210's special optical design limits acceptance angle to within ± 2.5 degrees, thus eliminating the influence of the LCD's viewing angle dependency. Matrix calibration allows for high measurement of LCD displays that provide colors through additive mixing of three monochrome colors (R,G,B). A new low luminance capability enables measurements as low as 0.1cd/m2
|
|
Verify the opacity of containers with on-line, high-speed, accurate and reliable measurements. The OPAX-1000™ combines proven sensor technology with innovative hardware to provide an easy-to-use system to measure light transmission in a wide variety of applications.
Many products require packaging designed to protect the contents from the damaging effects of light. Establishing pass/fail criteria for minimum opacity of these containers and providing on-line measurement eliminates defects and allows real-time quality control of these processes. The OPAX-1000™ provides a reliable solution, allowing you to monitor every container, and identify and remove containers with low opacity.
|
|
The module PW0049 is a stand-alone measuring device which is conceived for the absolute measurement of self-illuminating objects.
Its function is to reproduce the CIE 1931 2° CMF's as precisely as possible. The resulting Tristimulus measuring values X, Y, Z form the basis of most of the common color spaces used today.
|
|
|
The series A2 digital differential pressure gage is a patent pending microprocessor based digital pressure gauge for positive, negative, and differential measurement designed to be a direct replacement for mechanical gauges. The Series A2 differential pressure gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the A2 is also available with 0.5% accuracy. The A2 pressure gauge also has an optional 4-20 mA output for applications requiring an output signal. The A2 features a bright ½" LED display and process arch, which gives the gauge improved readability and precision. The A2 digital differential pressure gauges also feature 5 user selectable engineering units including in. w.c., mm w.c., cm w.c., kPa, and Pa. The Series A2 offers an improved look, and performance compare to mechanical gauges.
|
|
|
|
|
|
ServiceJunior without yarn.
Little genius of the diagnosis
Description:
- Transmission without yarn of the data.
- Possibility of data acquisition on the long term.
- Digital display with lighting.
- Conceived for remote control.
- Kit containing the JuniorWin software for PC.
- Function selected of peak (posting with bars and function actuated needle).
- Measurement of the points of pressure at rate of 10 ms reading (function max. min/).
- Range 50 m minimum.
- Whole Posting of the scale.
- Simplicity of handling by 4 keys.
- Integrated Battery: lifespan 1.500 hours.
- Index of protector IP54.
- Beach of pressure: -1... 16 bar/0... 100 bar/0... 400 bar/0... 600 bar.
Advantages:
- "Intelligent" Management of the memory.
- Is based on technology without wire, no connection by cable towards the PC is not necessary.
- A faster transfer of the data Allows the PC.
- Direct and simple Connection of ServiceJunior on the hydraulic system.
- No other portable apparatus nor another sensor and cable are necessary.
- Simple Use with lower costs for better results.
- Robust Enclosure not dirtying.
Applications:
- Machine tools
- Mobile Machines
|
|
|
|
|
|
|
The J5 provides measurement of melt pressure and other process variables. The J5 features a large 5 digit display that can operate in either green or red or change color in case of alarm. The J5 is configurable from the front, or from a PC with a software tool. The main input is for Strain Gauge or linear DC voltage/current with square root extraction or with a 16 segment linearizer. The second input with DC voltage or current is suited to temperature indication and signal conditioning (min, max, average, ratio, etc.) when combined with the main input. The J5 has 3 digital inputs independently configurable for alarms, display and calibration handling. Up to four alarms with ISA-A acknowledge are available as well as a retransmission output and Modbus RS485 comms. The J5 has three levels of password protection and the front panel is IP65. The strain gauge bridge of the melt pressure or load cell transducer can be powered by an internally regulated 5 or 10Vdc. The reliability of the strain gauge is monitored continuously. A front panel calibration routine is provided to automatically remove zero and span offsets. The automatic calibration can also be activated by using front keys, one of the three digital inputs, or over serial comms. Tare function for load cells is provided.
|
|
The JOFRA range of IPI Industrial Pressure Indicators is ATEX and CSA certified for use in potentially explosive environments in the field or in calibration laboratories. ATEX is the primary intrinsically safe standard in the European Union, while CSA refers to relevant Canadian and USA standards.
Accurate to ± 0.05% FS, the IPI can be used as a calibration reference or in applications where high accuracy pressure measurement is required from safety valve checks to system pressure verification. This Ex certification will allow the IPI to be used in any industry where there is a risk of flammable gases. These include oil refineries, off-shore platforms, chemical plants, gas production plants, oil and gas shipping, pharmaceuticals and in whisky distilleries.
|
|
HVAC measurement device PascalMaxx for monitoring & control
Differential pressure instrument with membrane measurement technology for monitoring and control of differential pressures and air flows in HVAC applications. Suitable for rooms and ducts.
By the integrated switch the pressure conditions can be monitored and an alarm set in case of need. The also integrated analogue outputs (V and mA) can be used for a system control. The automatic Zero-Point calibration assures an accurate and reproducible measurement at any time and avoids any influence of the mounting position on the measurement results.
|
|
Digital Pressure Controller/Calibrator - Model 7250
The Model 7250 Digital Pressure calibrator is available in a variety of pressure ranges from 0-5 psi to 0-3000 psi, and is an economical alternative to the Model 7250xi and 7250i. The Model 7250 provides 0.003% of full scale precision and can control to the set point in 15 seconds with no overshoot. When a higher level of performance is required, please refer to the 7250i and 7250xi Digital Pressure Controllers.
|
|
Pressure Indicators
The Vista-Gage is a unique piston-type pressure indicator, specifically designed to withstand machine vibration, shock, pulsation, pressure surges and other rigorous conditions that create problems for conventional pressure gauges, with fragile bourdon tube mechanisms. Available in Vista-Gage for High-pressure, Lo-pressure and Vacuum indicators, Vista-Cator for GO/NO-GO indicators, and Vista-Monitor for Accumulators.
|
|
|
Analog and digital indicating units and transmitters for liquid level, differential pressure and flow measurement. Media 6 allows for connection of the dp-cell to your PC in the logistics center.
|
|
Pressure transmitter, pressure switch Pressotronic
- operating pressure up 600 bar
- compact design
- up to 4 programmable set points
- alternative 1 analogue output + 1 programmable set point
- window and hysteresis function
- two outputs programmable 1-100 Hz
- direct or remote installation
- uneffected by cable length
- LED display with status indication
- pressure switch display 270° rotatable
- standardized manu structure
- max./min. memory
|
|
Sensor for differential pressure and volume flow, explosion proof
Electrical, explosion proof differential sensors series ExCos-P and RedCos-P, in acc. with ATEX 94/9/EC for use in hazardous areas zone 1, 2, 21 and 22 (in acc. to sensor type), for all kind of gas, mixtures, vapours and dust. 24 VAC/DC supply, Measuring range /- 100 Pa, /- 250 Pa, /- 600 Pa, /- 1250 Pa, /- 2500 Pa, /- 5000 Pa, /- 7500 Pa. Working range adjustable, output 0...10 VDC and 4...20 mA, actual value indication, aluminium housing IP 66, integral Ex-e terminal box. Series ExCos-P for use in Zone 1, 2, 21, 22. Series RedCos-P for use in zone 2, 22.
The module is for installation inside the hazardous area, an interface in the safe area is not required, installation of intrinsic safe circuit is not required. This saves cost, space and guarantees safety.
|
|
The dV-2 PS is a sophisticated digital pressure gauge with two independent pressure switch outputs. The gauge employs KELLER’s proven microprocessor technology which produces highly accurate results. All readings are linearised and temperature corrected, to give an accuracy of 0,2 %FS.
There are two independent switches for High and Low control functions. These are solid state and therefore not subject to wear. The switch points are programmed directly from the two front panel buttons and a menu system. Alternatively, the dV-2 PS can be connected via the RS485 link to a laptop/PC, and configured using KELLER’s “Pressure Switch Console” software. User defined configurations can be stored on the computer for future reference. Pressure sequences can also be monitored and recorded on the PC for application diagnostic purposes using KELLER’s Read30 software.
|
|
|
Series ISE30 high precision digital pressure switch (for positive pressure) with two color digital display allows you to choose the setting according to your application requirements. 4 different display settings are available. Abnormal conditions can be detected at a glance.
|
|
|
|
|
|
Specially developed for the supervision of clean-rooms, the CPE 300 is dedicated to measures of low pressure andor depression of air or neutral gases from 0/+10 Pa to -1000 /+1000 Pa.
The CPE 300 presents the advantage to become integrated perfectly into walls and to answer to the standard of cleanliness thanks to its stainless case (brushed or with lacquered).
It is equipped with 2 visual and audible alarms, with 2 reversers relays, of a big electroluminescent display and a process of autocalibration which guarantees in the time an excellent stability and a reliability of the measure in low as in high scale.
Thanks to its digital communication (RS 232 and Protocol Modbus RS 485), it offers the possibility of showing alternately (in addition of the measure of pressure) two other parameters resulting from temperature, humidity, velocity or airflow external sensors (KIMO).
Two innovative systems to facilitate the maintenance on-site :
· Its measuring element benefits from the SMART PRO system. It is individually adjusted and is automatically recognized by the device. Thanks to this process, it is possible to replace the measuring element in a simple and fast way without return of the sensor to the factory.
· The calibration in front face : this system allows to proceed to the calibration of the device without un-mounting it.
The sensor CPE 300 is so always operational !
Join our distribution network all over the word....Contact us !
|
|
|
|
see the results for the following category : 
