|
|
|
|
|
|
HUMLOG 10 series humidity/temperature data loggers permit the exact and professional recording of humidity and temperature values. Low power consumption and large memory size enable long-term data capture for a wide range of applications.
HUMLOG 10 / HUMLOG 10TSE:
The elegant 2-part housing, which consists of a display module and a plug-in sensor module, enables easy installation and a fast exchange of the sensor unit when service is required.
The current measurement data on the large display is easy to read even from a distance of several metres.
HUMLOG 10THC:
The compact HUMLOG 10THC version does not have a display and is equipped with internal H/T sensors.
Measurement Data - Evaluation & Configuration:
Measurement data evaluation and instrument configuration can be conveniently performed via the serial RS232 interface with a PC or notebook computer by means of the Smartgraph TM 2 software, which runs under MS Windows TM.
Smartgraph TM 2 can display the recorded measurement data in graphical form or as a table. The layout of the display can be individually configured by the user.
|
|
|
|
|
|
Product Guide
Temp. and Humidity recorder TR-71U/TR-72U
Single Temperature datalogger + Timer DTM-317
Daul Temperature datalogger DTM-318
0 °C ~ 50°C+/-3°C; 10 ~ 95% +/- 5%
USB Connection
One Year Continual
Use on One Set of Batteries
Simultaneous Monitoring of Multiple
Channels of Data
High Speed Data Transfer
Large Data Capacity: 8,000 Readings X 2
Channels
Adjustment Function
Accurate, Compact,
Lightweight and Affordable
Easy to Read Multi-Functional Display
Humidity/Temp Meter w/Dual Input
Model : DTM-321/DTM-322
Temp:-20°C ~ 60°C (-4°F ~ 140°F ); K-type:
-200°C ~ 1,370°C (-328°F ~ 2,498°F);
Humidity: 0 ~ 100% RH
4 Digit, Triple display.
K-type Termocouple.
Reading hold °C or °F annunciators.
MAX, MIN. function.
Auto power off.
ÄREL function. (DTM-321)
Automatic low battery indication.
RS-232 computer interface.
RS-232 cable and software for Windows( DTM-
322).
TR-71W Web Temperature Data Logger (USB)
TR-72W Web Temperature / Humidity Data
Logger (USB)
About the TR-7W Series Web Viewer
View Reading on a Cell phone
Recording Settings Monitor Current
Readings
Downloading Recorded Data Graph
Send Warning Messages by E-mail Main
Unit Settings
Wireless Lan Option Brings Flexibility &
freedom
Compact / Lightweight / Water Resistant!
No Switches means No Fuss / No Mistakes /
No Tampering
Wide Temperature Measuring Range:-60°C
to 155°C
Two Types to meet your Needs
Large Data Capacity: up to 16,000 Readings
Battery Life Good for up to
Two Years of Continued Use
Wide Selection of Recording Intervals
|
|
Datalogger ECOLOG TH1
- Connection for 1 integrated (-35°C ..+55°C; 0% ..+100% rH) orup to 2 external humidity and temperature probes (-35°C ..+70°C; 0%..100% rH) orand second temperature probe(-50°C..+140°C)
- Calibrated, exchangeable humidity and temperature probes
- Memory capacity for 64,000 measured values
- Large display with alarm information
- Key pad with 4 keys, external start, alarm reset, measured value and alarm scroll
- 1 digital input
- DB15 multifunction connection with alarm output and RS232
- Direct printout of measured values and alarm data at printer
- Ecolog TH1 with white housing Part No.: 2423-W
- Ecolog TH1 EEX with approval for EEX zone 1
|
|
Data logger HygroGuard 10 / 20
- Complete, battery powered, ready to use data logger system
- Included data acquisition/configuration software
- Included data transmission cable
- High storage capacity of 120'000 data points
|
|
The DRAABE HumSpot steers and supervises the humidification of the individual zones (e.g. different areas, work areas). The simple menu guidance and the lit color display guarantee high convenient operation. Their advantages:
• Point-exact activation of the air moisturizers on falling below of the adjusted dampness desired value
• High measuring precision by digital, capacitive dampness measuring technique
• Permanent status indication of relative dampness and ambient temperature
|
|
| ... products without technical information |
| |
Measurement Specialties offers a wide range of standard and customized instrumentation probe assemblies suitable for the instrumentation industry.
Examples include:
- Surface probes
- Air/Gas probes
- Screw-in probes
- Immersion probes
The products are available in a range of resistance/temperature (R/T) curves, electrical tolerances, and mechanical housings.
|
|
NTC temperature probe Part No.: 3025-L00
- NTC temperature probe -50°..+140°C
- With protection tube G 1/2"
- LS=135mm
- D=10mm, p=40bar, 2 terminals, stainless steel V4A
|
|
Features
- Operating temperature range of -20°C to +50°C
- 10 kOhm resistance at 25°C ±10%
- Small size, comformally coated for durability and stability
- Solid nickel wires with Teflon insulation
- Works with all ILX Lightwave Temperature Controllers
The TS-520 is an uncalibrated NTC 10 kOhm leaded thermistor with a baked on phenolic coating for durability and long-term stability. These have solid nickel 30 AWG wires with Teflon insulation to provide insulation when assembled in a heat sink or plate with a lead length of 3 inches (76 mm). They are ideal for measuring the temperature of a laser diode or other component during testing. These devices can be calibrated with accuracies to ±0.05°C over their temperature range using the Steinhart-Hart model
|
|
The precision temperature gauge TEMP12 is an electronic gauge for the temperature measurement.The device is based on a module system. A variety of ranges of application arises from it. These variants are different with respect to the port connected to a computer, the power supply unit, the number of available measuring channels and the design of casing.
The temperature gauge conceptionally was equipped for the highest precision and high long-term stability (at MTBF > 3000 hours). To be able to fulfi ll the high precision standards in the microelectronics production, specially aged NTC sensors will be built-in. The burn-in process which is carried out at approx. 120 degrees Celsius under N2-atmosphere can be at ultra-precision sensors up to 10 years.
|
|
| ... products without technical information |
| |
Datalogger ECOLOG TN4 Part No.: 2421
- For 4 NTC probes -50°C..+140°C
- Memory capacity for 64,000 measured values
- Large display with alarm information
- Key pad with 4 keys
- External start, alarm reset, measured value and alarm scroll
- 2 digital inputs
- DB15 multifunction connection with alarm output and RS232
- Direct printout of measured values and alarm data at printer
- Ecolog TN4 with white housing Part No.: 2421-W
- Ecolog TN4 EEX with approval for EEX zone 1 Part No.: 2421-Ex
|
|
|
The 2-channel digital thermometer is designed for stable, high precision temperature measurement over the range of -200 to +660°C. To further enhance stability, the measurement electronics are encapsulated in a constant temperature oven.
|
|
| ... products without technical information |
| |
1/8 DIN Standard
The K3MA series consists of a process indicator, a frequency/rate indicator and a temperature indicator. All models are equipped with a highly visible LCD display with 2-colour (red and green) LEDs, have a 96 x 48mm front housing and the same short depth of 80mm.
|
|
Programmable panel meter for process, temperature and load cells.
Size: 96x48x60 mm.
Tricolor display: ±19999 (4 ½ digits)
|
|
LumaSense offers the maket quality photoacoustic-based gas monitoring solutions. The Photoacoustic Multi-gas Monitor 1314 is a highly accurate, reliable and stable quantitative gas monitor. Its measurement principle is based on the photoacoustic infra-red detection method. This means that the 1314 can measure almost any gas which absorbs infra-red light.
Selectivity is achieved through the use of optical filters. By installing up to 5 optical filters in the 1314, it can measure the concentration of up to 5 component gases and water vapor in any air sample. Detection limit is gas-dependent, but is typically in the ppb region. The accuracy of measurements is ensured by the 1314's ability to compensate for temperature and pressure fluctuations, water-vapor interference and interference from other gases known to be present (Cross-compensation). Reliability of measurement results is ensured by regular, automatic self-tests.
|
|
|
LumaSense's SF6 Leak Detector offers an unmatched combination of performance and convenience. Based on the company’s Photoacoustic Spectroscopy (PAS) technology, the system offers highly accurate, reliable and stable quantitative gas analysis and detection. The growing environmental requirements and pressures regarding the use of SF6 make LumaSense’s system a coveted tool designed for everyday use.
|
|
The LumaSense Photoacoustic Field Gas-Monitor Innova - 1412 is a highly accurate, reliable and stable quantitative gas monitor. Its measurement principle is based on the photoacoustic infra-red detection method. This means that the 1412 can measure almost any gas that absorbs infra-red light.
Appropriate optical filters (up to 5 + water vapor) are installed in the 1412's filter carousel so that it can selectively measure the concentration of up to 5 component gases and water vapor in any air sample. Further, the instrument can compensate for interference between the measured gases, using the unique Cross-compensation feature. The 1412's detection limit is gas-dependent but typically in the 10-² ppm region.
|
|
|
|
