|
|
|
|
|
|
THE ONLY FULL SATURATION OIL BINDER POWDER
Specially designed to absorb oil, grease, petrol, gas oil, paints and chemicals in working areas.
It's a user-friendly product (same usage as the common saw dust) with unique features. Just think that OKO PUR can even absorb oil in the water, forming big agglomerates easy to be recovered. In this way OKO PUR reduces the oil content in the polluted water of more than 95%. OKO PUR is available both as powder and as granules.
OKO PUR has got an enormous absorption capacity: a 8 kg bag absorbs 30/80 kg of liquids.
OKO PUR, both as powder and as granules, has been certified as excellent sorbent for heavy traffic pavements. German Home Office (BMI), in the paragraph called "Removal of the oil rests on heavy traffic pavements" specifies that after making use of sorbents for the elimination of the polluting substance and the following polishing with a water-detergent mixture, the pavement must afford again a good sealing power, in any case not lower than 80% of the original value, especially if it?s damp.
THE TEST MADE WITH OKO PUR GAVE 0% DIFFERENCE IN SEALING POWER. PRACTICALLY THE PAVEMENT HAS RECOVERED ITS ORIGINAL SEALING POWER. THIS IS A SURPRISING RESULT WHICH PUTS OKO PUR AT THE TOP OF THE SORBENTS RANKING.
In carrying out the obligations laid down from the Italian Home Office, the local Districts prescribe that on road pavements only approved sorbents with MPA-IIIR certificate can be used. Each OKO PUR bag has got the approval label.
OKO PUR granules is the ideal sorbent in case of road accidents with hazmat spills.
|
|
Sheets
Absorbents for oil and hydrocarbons, hydrophobic, they can absorb very rapidly; the average rate of absorption is 2000% in about 22 seconds, test with sheet 200 gr/sqm and SAE 20W/50 oil. This means that 1 kg of oil absorbent material absorbs up to 20 kg of oil in less than 30 seconds. Available in different weights and measures either rolls or sheets.
Rolls
Absorbents for oil and hydrocarbons, hydrophobic, they can absorb very rapidly; the average rate of absorption is 2000% in about 22 seconds, test with sheet 200 gr/sqm and SAE 20W/50 oil. This means that 1 kg of oil absorbent material absorbs up to 20 kg of oil in less than 30 seconds. Available in different weights and measures either rolls or sheets.
|
|
Booms/Socks
Oil absorbent materials able to separate oils and hydrocarbons from water available in two different kinds:
Marine boom, equipped with steel fixing rings and hooks to reach the needed length. External net grants better resistance amplified by a strengthening rope. Available in different diameters and lengths.
Ground socks (with no fixing rings and hooks) suitable in containing small spills on all industrial surfaces.
Bilge booms
Bilge booms employed to absorb oil on water surface in tanks, wells, and bilges. Easily employed because equipped with a connecting slot to a rope.
Pillows and Drum Top Covers
Absorbent pillows and absorbent drum top covers to be placed where leakages could occur.
|
|
Granular
SEPIOLITE is an economical mineral porous product absorbing oily substances and acids on roads, motorways and asphalts even in case of strong winds. Absorbing: 1:1
|
|
|
Absorb leaks and spills to keep floors dry and workers safe. Strong, durable PIG® Mat lasts longer so you use less Mat and spend less time replacing it.
|
|
|
The PIG® Curb Style Drain Insert is designed for use as a Best Management Practice as part of a stormwater pollution prevention plan to help prevent hydrocarbons and sediments from entering the water system. Normally lasts 3-6 months but should be inspected regularly.
|
|
For non-flammable petroleum spills, use PIG® Oil-Only Rolls.
Sometimes you simply need a mat to last longer and absorb more. With a super-thick bottom and super-tough top, FAT MAT™ Rolls are perfect for hard-to-reach areas, wet walkways, big cleanups or any other job requiring long life and high capacity!
|
|
|
|
|
|
FIRE SORB
FIRE-RESISTANT INDUSTRIAL ABSORBENT FOR FLUIDS AND GREASES
* Fire-resistant absorbent made of red spruce granulates treated at + di 600¡C
* Granulometry from 910 to 250 micron. Density 0,170 +- 0,03
* Absorbs 750% its own weight and from 48 to 80% its volume
* Doesn't spread fire. Fire-proof via water : 7%
* Will not turn to mud
* Chemically neutral
* Screened and de-dusted
* Not toxic . Biodegradable. 100% vegetable
* Absorbs any kind of fluids, oil, water, solvents, inks, weak acids and bases, chemicals, greases as well as mixtures and other filth incidentally spread on land.
* Disposal by incineration or landfill collection according local regulations and according the absorbed product.
* Fire classification : M1 (CNPP approved). Approved by CEDRE.
* Made of lignin and cellulose. Contains no clay nor silicone.
* Antislip.
* Recommanded to be used on national roads and motorways : N¡ ABS.2001.10.
* Complies with NF P 98-190 regulation dated february 2002.
* Recommanded to be used by Military Forces (S.E.A.). ADSORBENCY UP TO 750% ITS OWN WEIGHT.
APPLICATIONS:
* In mechanical and precision workshops, car industry, aviation, garages, filling stations, transit areas, roads and motorways, petrochemical industries, etc.
* Absorbs any hazardous fluid on the ground, antislip property, floor cleanup.
* Will not turn to mud when in touch with water and oil.
* High safety use on floors thanks to its antislip properties.
|
|
| ... products without technical information |
| |
Application
In the high pressure circuits of hydraulic and lubricating oil systems.
Performance features
Protection
against wear: By means of ultra-fine filter elements that meet even
the highest demands regarding cleanliness classes and
dirt-holding capacity.
Protection against
malfunction: By means of permanent filtration in the off-line circuits
excellent cleanliness classes can be achieved.
Special design features
Cover: The cover can be opened without special auxiliary tools.
Because of the cover design the filter element can be
changed almost without losing any oil.
Flow control valve: Over the flow control valve the FNS off-line filters are
connected directly to the high pressure pipe. The surplus
volume (e. g. in circuits with fixed displacement pumps)
from the high-pressure circuit is cleaned by the ultra
fine filter element.
Dirt
retention valve: Ensures that dirt accumulated in the filter is removed
together with the element. Settled dirt cannot return
into the system.
|
|
Off-line filtration is in many cases the only feasible principle to achieve the required system cleanliness in fluid power systems. Off-line or kidney loop filter units consist of a circulation pump coupled to an appropriately sized and selected oil filter. The oil is circulated through this external filter system independent from the existing or non existing flow in the main system.
The programme comprises small compact standard units as well as customised subsystems of variable sizes.
Off - Line filter BNF series
Interchangeable DIN filter elements
Low noise emissions
Easy installation
May also be used for filling and draining the reservoir
Compact dimensions and easy to install either on the tank top or side. DIN elements provide qualified system cleanliness.
|
|
The DUO3 off-line oil filter increases the availability and reliability of hydraulic and lubricant oil systems. For optimum oil filtration performance, more often than not filtering takes place in off-line circuits, where the oil filter can operate 24 hours a day independently of the main system, avoiding any changes in pressure and flow.
Fields of application
Typical fields of application include hydraulic systems, lubricating systems, hydraulic presses, injection moulding machines and machine tools. When rebuilding a system we recommend installation of an off line oil filter.
Design
Its low noise level and compact size make the DUO3 ideal for use in many different machines and working environments. For uniform and good circulation and oil filtration, the DUO3 has been fitted with a low pressure pump from our QPM range. This pump has few moving parts and is designed to have a long service life and consume little power.
|
|
CJC™ Fine Filters are offline oil filtration systems with integrated circulating pumps for off-line installation. The filters are recognized around the world as highly efficient purification systems for applications involving hydraulic oil, lubrication oil, gear oil, quenching oil, phosphate esters and more.
CJC™ Fine Filters are ideal for controlling oil contamination levels for particles, water and degradation products (oxidation resin/sludge, varnish).
The CJC™ Depth Filters have a filtration degree of 3 microns absolute and a very large dirt-holding capacity.
CJC™ Fine Filters deliver measurable customer benefits: lower operation and maintenance costs, increased productivity, and maximum lifetime for system components, in-line filters and oil.
The modular filter units are built and sized to specific customer requirements - whether the oil volume is 2 litres or 200,000 litres.
|
|
Parker's Tanktopper Series features:
• Flows to 18 gpm
• 3 micron to 120 micron absolute
• Disposable or recleanable elements
• Visual and electrical indicators
• Microglass long life elements
• Inside-to-outside flow through the element
• Complete contamination removal during element service
• Optional magnetic prefiltration
• Optional dipstick
• Optional airbreather
• No tools required for servicing elements
|
|
Contaminated oil is drawn into the Parker Portable Purification System (PVS) by a vacuum of 25 In/Hg. The oil passes through the in-line low watt density heater where the oil is heated to an optimum temperature of 150° F (66°C).
The oil then enters the distillation column where it is exposed to the vacuum through the use of special dispersal elements. This increases the exposed surface area of the oil and converts the water to vapor form, which is then drawn through the condenser by the vacuum pump.
The water-free oil falls to the bottom of the column and is removed by a heavy duty lube oil pump. This pump forces the dry oil through a final particulate removal filter. Clean oil passes out of the unit, back to the reservoir — and into the system.
|
|
| ... products without technical information |
| |
Ganter has for many years been a well-known supplier of oil sight glasses made of plastic and aluminium. The range of products has now been enlarged to include oil sight glasses made of stainless steel and brass. In addition, an “ATEX” sight glass made of aluminium has been developed
for use in explosion hazard atmospheres which is available in three sizes with different threads, complying with the directives of the European Union for explosion protection.
|
|
|
Systems of assembly for tubes EMILE MAURIN the systems of assembly are elements of tightening which make it possible to build gauges, installations and operating systems at the same time easily and quickly by using sections of standard tubes, round or square. The very broad nut range of tightening cast solid or made up of several elements offers almost unlimited possibilities. The nuts of cast solid tightening allow very robust tubular constructions. In this case, one will use tubes of precision with an external diameter which remains in tight tolerances. The nuts of tightening made up of several elements are not indicated for tight tolerances because they can also be used with tubes of square section, which allows integration already existing systems.
|
|
The Liquid Level Gauge has been introduced to complement our range of liquid level sensors. The gauge is available for most liquid types (fuel, oil, water...) and can be etched with other data labels if necessary. The gauge has been designed with special features including fully configurable scaling, adjustable electronic damping and a fully adjustable low level warning indicator. Additional features include auto-dimming control and multi-coloured LEDs ensuring this device can be seen in all lighting conditions.
- Fully Configurable
- High Accuracy
- Low Level Warning
- Low Height and Recess Profile
-Simple Installation
- Lightweight
- Light Sensitive Auto-Dimming
- Available in Fuel, Oil, Water variants (plus others)
|
|
| ... products without technical information |
| |
|
this pump is suitable to carry oils,such as thick oill, diesel fuel and lubricator,animal and vegetable oil etc,also it is available to transport the fluidities with low flashing point by equipped with copper,gear such as gasolene and benzene,etc,take care that the media temperature shouldn it surpass 70 ℃ and the available temperature of oilpump against hitemperature shouldn it more than 300℃.the pump has safety valve itself when the pump works under the high pressure,shaft seal has skeleton oil seal,mechanical seal and stuffing seal,please it should be indicuted when placing order.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
