|
|
The Innomatec connec ® Quick Connector System closes pipes, connecting pieces, tubes, drill holes, outer threads, inner threads and all types of cylindrical bodies, but it can also connect you to a desired circulation system. Oval, rough and cast surfaces along with high tolerances samples are radially sealed.
The innomatec connec ® Quick Connector System can be loaded with a sample manually or with an automatic tool. The Quick Connection is pneumatically activated with a pressurized air system. Sealing occurs with an elastic rubber washer. The system is filled or sealed through the tested connection. After the test is complete, the test connection is depressurized, the sealing ring relaxes, and the connection can be removed. Whether the connection must be armed with a sliding barrier depends on diameter, working pressure, and surface properties (oiled, etc.).
The innomatec connec ® Quick Connector System has an excellent degree of sealing (and is “helium-proof”). The standard lives of the sealing rubber washers are appropriated depending on routine aptitude. The change in the sealing rubber washers can be very easy and does not necessitate the use of tools.
There are a number of special inplementations for specific uses with motion limitation, sliding barriers, support hulls for specific environmental conditions. For specific utilizations, the connection measurements and individual parts can be adjusted to the task. We welcome any of your questions. Please use our checklist for this purpose.
|
|
|
These couplings are designed for all important low pressure applications as well as for pressures ranging up to 650 bar (on demand even more). They vary from applications in machining, hydraulic, off-shore, security technics, fire protection, mould construction, plant engineering, laboratory, Chemical industry, pharmaceutical industry, food industry, laboratory technics, medical engineering to clean room applications. All couplings according DIN ISO 7241.B are interchangeable amongst each other.
|
|
Quick Couplings
The combination of Hansen Couplings, the innovator of the quick coupling, and Coupleurs Gromelle, with its wide range of European style couplings, gives Tuthill Coupling Group the broadest range of quick coupling lines in the industry.
Our quick couplings are available in over 6,000 configurations. They are available in brass, stainless steel, steel, plastic, and in a wide range of sizes. We provide quick couplings to meet the needs of every industry.
View our product lines to see the industry standard for quick connect/disconnect couplings.
Quick Disconnect Couplings
Hydraulic Couplings
Fluid Couplings
Gas Couplings
Plastic Couplings
Pneumatic Couplings
Safety Couplings
Quick Coupling Fittings and Accessories
QUICKSEAL® Leak Testing Equipment
|
|
NORMAQUICK® V2
Quick Connectors
NORMAQUICK® V2 plastic quick connectors are an ideal means to connect media carrying lines as well as ventilation and exhaust lines in the automotive industry.
Standard materials
NORMAQUICK® V 2 connectors are made from recyclable materials featuring extremely low permeation values. Our standard versions are made from Polyamide 6 with 30 % glass fiber content or Polyamide 12 with 20 % glass fiber content. The O-rings are made of NBR, HNBR, FPM and FVMQ as standard equipment.
|
|
APPLICATIONS
Multi-purpose shut-off stops for domestic potable water systems.
Patterns include angle and straight with multiple inlet and outlet configurations.
MATERIALS & CONSTRUCTION
• Oversized chrome plated handle
• Heavy duty chrome plated one piece forged brass body
• Precision machined brass stem and ball
• Patented one-piece “shut off system” for Series 7105 stops
• Specially design seats
• Support clip for thermal stability
• 100% seat and shell tested to insure no leakage for the life of the valve
DESIGNCRITERIA
• All valves rated at 125 PSI CWP
• CSA B125
• ASME A112.18.1M
• ASTM D2846 for CPVC end connections
• ASME F1806 for PEX ends
• CSA and IAPMO listed*
• NSF/ANSI 61-9 Compliant*
• Each valve individually tested in ISO 9001 certified facility
* Applicable for specific valves
|
|
Trelleborg is in permanent contact with his customers to define the particular working requirement for their hose, and has developped a vast programme to provide full information on couplings systems.
For each hose and each application, Trelleborg develop, test and check out a suitable connection.
|
|
Flanges
American standard ASME/ANSI
- Welding neck 150 lbs.
- Welding neck 300lbs
- Welding neck 600 lbs
- Slip-on 150 lbs
- Slip-on 300 lbs
- Blind Flanges150 lbs
- Blind Flanges300lbs.
ASME/ANSI European standard DIN
- Welding Neck DIN 2632 PN 10
- Welding Neck DIN 2633 PN16
- Welding Neck DIN 2635 PN40
- Plane flanges DIN 2576 PN10
- Blind FlangesDIN 2527 PN 10
- Blind FlangesDIN 2527 PN 16
- Blind FlangesDIN 2527 PN 40
Europeanstandard (cont..) DIN
- Threaded Flanges
- DIN 2566 PN 16
- Loose Flanges Aluminum
- Loose Flanges, hot galvanised
- Loose Flanges, stainless
- Pressede Loose Flanges, stainless
- Pressede Loose Flanges, zinc plated
- Sandvik Coupling L
|
|
STENFLEX swivel joints are used in applications involving liquid and gaseous media. The swivel joints can be used as flexible pipe connectors under the most demanding conditions and can withstand extreme temperature and pressure.
STENFLEX swivel joints are highly suitable for absorbing oscillations. Swivel motion can be handled as well as complete rotation at low speed.
|
|
sf-Test Points, M16x2
Specially designed as a measuring point in a system; for measurement, control and service as well as venting valve and for taking test samples.
|
|
STENFLEX pipe connectors are designed to disrupt unwanted sound transmission and absorb vibrations in piping systems, pumps, control fixtures, machines and equipment.
The most widely used application for rubber-metal connectors is found in building technology. Noise caused by machinery, pumps or burners in public and private buildings, e.g. in homes, hospitals and schools, is considered a nuisance.
|
|
|
Connections, Flexible devices, Valves, Clamps for: Watering, Compressed air, Welding, Irrigation, Fire, Hydraulics
|
|
Features:
- Compact and easy to install
- 100% self cleaning
- Fits all flange and pipe connections
- Available in cast iron, stainless and aluminum
- Reduces noise level
- Minimized pressure drop
Applications:
- For all high and low density dilute phase systems
- For plastic pellets, other granules and abrasive products
- For retrofitting existing systems
- For replacement of long and short radius elbows - and other pipe bends
|
|
HTC tube fittings are convenient [building block] components. The offer great flexibility in the design and construction of high and ultra-high vacuum system.
-- Flanges : 304 S.S. ( Other material available upon request )
-- Fittings : 304 S.S. ( Other material available upon request )
-- Flexible hoses : 304 S.S.
-- Flexible bellows connections : 316Ti, 321 S.S., 316K S.S., 613 S.S., 304 S.S.
-- HTC tube fitting are made from welded pipe or tube.
-- Larger or special size available upon request
-- Seamless pipe or tube are available upon request.
|
|
Ganymed-Swivel Joints
Applications: Articulated tongs, Loading stations (chemical, petrochemical industry, etc.) waste water purification techique (ventilation systems, rotating scraper bridges, sludge cleaning, etc.)
Connections: Threads, welding, flanges, cutting rings
Materials: Steel (42CrMo4), Stainless steel (1.4571)
Sealing: PTFE compound
Operating conditions: max. pressure 420 bar, max. temperature 225 °C, min. temperature -50 °C (*, 360° swivelling movements, rotating movements also suitable for low speed
|
|
|
Nor-Cal's ASA flanges are manufactured from specially treated 304 stainless steel. These flanges mate with standard 150 lb. ASA flanges or 150 ANSI flanges. They are available from stock for standard tube sizes from two to 12 inches. Larger sizes are available upon request. Nuts and bolts are used to apply pressure between the mating flanges and a seal is effected when a Viton-A® O-ring is compressed. ASA flanges can be baked to 204°C and have a vacuum range of up to 10-8 Torr. Besides being sold separately, they are available as standards on nipples, adapters, tees, crosses, traps, elbows and valves.
|
|
* Barco Self-Aligning Swivel Joints Standard Series
• steam
• hot oil
• water
• bronze or cast iron
Rated to 325 psi(23 kg/cm2)
3/8" to 1-1/2" sizes
Series 600
w/Injectable Graphite Sealant
Hot Oil Applications
Up to 200 psi and 650°F
High Pressure Steam
Up to 700 psi and 503°F
1 1/4" to 1 1/2" sizes
* Series 600 Self-Aligning Swivel Joints BARCO's 600 Series swivel joints
allow servicing without disassembly.
A special port allows injection of graphite sealant without disturbing the assembly.
These joints are recommended for hot oil and high pressure steam applications.
see our product catalog self-aligning swivels page for more details.
|
|
The Variacor® system, internationally patented, makes all rigid hosing flexible and multi-directional, whatever may be the pressure.
-Increases pliability of fire hose, less effort due to hose rigidity,
-Makes easier using fire hose in hard to access area,
-Reduces step backwards when handling fire hose.
|
|
Couplers for valve/actuator assembling kits.
Available partially machined (on actuator side) or completely machined (valve and actuator sides) according to customer specification.
Nickel plated carbon steel or stainless steel available.
|
|
Couplers water, system 1/2 ", 3/4 ", 1 "
Automatic connections high pressure (180 bar/150 °C)
Couplers of safety warm water (remains engaged under the effect of the pressure)
Stainless steel couplers
|
|
| ... products without technical information |
| |
|
|
