|
|
Cutting Ring Fittings acc EN ISO 84 34-1, for example
- made of stainless steel AISI 316ti
- LL, L and S series
- from 4 to 42 mm
- nominal pressure up to 630 bar
- with double sided pipe connection
- with Viton seal or metal sealing
- and other variations according to customer requirements |
|
Top Line BioPharm products are designed and built to meet the most stringent requirements of ultra-pure processing, including the ASME BPE 2002 specifications for dimension, surface finish and tolerance.
- Type 316L stainless steel
- Clamp or weld end connections
- Pin stamping of heat numbers and stainless steel grades
- High quality electropolishing or other finishes to suit your needs
Every Biopharm product is subjected to rigorous quality control inspections, then capped and shrink-wrapped to ensure safe storage and shipping. |
|
Autoclave's medium pressure and high pressure series use the coned-and-threaded connection. This metal to metal connection features orifice sizes to match the high flow characteristics of this series. Autoclave's fittings and tubing are used as fluid handling components for the chemical/petrochemical, research, and oil and gas industries and have different ranges capable of operating to 150,000 psi (10,000 bar) and range in size from 1/4" to 1" tube size.
|
|
- Working pressures up to 14.000 bar / 200,000 psi.
- Large orifices at rated pressures.
- Excelent flow capacity performance.
- Safety quaranteed by use of wheep holes.
- High quality stainless steel.
- Suitable for fluids and gases.
|
|
While others were thinking about large fittings, Clippard was thinking big about smaller fittings. Smaller valves and cylinders created the need for smaller fittings. Clippard was the first to develop ports utilizing the 10-32 thread. This thread has become an industry standard in the marketplace.
Clippard precision fittings will save you time, space, and money when designing versatile, productive, trouble free, pneumatic circuits. Our endless variety of fittings insure that you find just the right fit when plumbing pneumatic circuits or assemblies. These fittings are small in size but large in performance, allowing for streamlining of pneumatic assemblies and eliminating the need for larger, more expensive, cumbersome fittings.
|
|
Pipe Adapters
Pipe Caps and Plugs
Pipe Couplings
Pipe Crosses
Pipe Elbows
Pipe Nipples
Pipe Reducers
Pipe Tees |
|
We have a very large range of barbed tees and "Y" fittings along with check valves and luer fittings,ask for our extensive catalogue
|
|
Description: 10-32 thread stainless steel push-connect fittings for 1/4" OD tube.
Material: 303 Stainless Steel
Seals: Two Buna-N O-rings
|
|
Whatever you want from a Bulk Materials cut-off valve you’ve got it with Clyde Materials unbeatable Dome Valve® - the cost effective valve solution.
The Clyde Dome Valve®, widely regarded as the original and best material handling valve in the world, offers exceptional life from only a single moving part. The Dome Valve® is recognised as a low maintenance, long life solution that can last at least 1 million cycles between maintenance inspections. It has the ability to cut through static or moving columns of material and is pressure-tight, ensuring a consistent pressure tight seal is created when the valve is in the closed position, but in the open position it provides an unrestricted full bore opening for the best product flow characteristics possible. The Dome Valve® can also be used as a line, vessel or reactor isolation valve.
The Dome Valve® enhances other technologies from Clyde Materials Handling, a leading provider of pneumatic injection, conveying, materials handling & vacuum cleaning solutions.
The solutions we create for our customers generate many benefits and are backed by three decades of domain knowledge, expertise and a track record of generating exemplary success.
Dome Valve® sold in the United States under the trade name ‘Spheri Valve’ |
|
Parker Instrumentation has launched a range of 10,000PSI-rated (689bar) instrument pipe fittings. The range provides instrumentation and piping engineers with quality components for interconnecting instrument-grade piping in the growing number of high pressure applications, such as those found in deep water oil and gas exploration and production.
Parker's High Pressure Instrument Pipe Fittings are available in numerous forms including straight, elbow, tee and cross shapes, and support male and female NPT (National Pipe Taper) thread sizes from 1/8 up to 1 inch. The fittings are fabricated from 316L grade stainless steel as standard, with other materials available as options.
To support quality procedures, HCT (heat code traceability) identification codes are provided as standard. Parker will also provide NACE compliance information for the components, on request.
In total, 13 styles of fittings are available, providing an efficient single-piece solution for virtually every common connection requirement: male hex nipple couplings in standard and long sizes, male and female elbows and tees, street elbow, female cross, pipe cap, hex headed plug, female hex coupling, male-to-female adapter, and male-to-female reduced bushing.
|
|
Parker Instrumentation's radical new design of tube connector that can deliver huge cost savings...
Assembled by means of a simple push-fit operation, the new connectors provide permanent connections for fluid systems operating at up to 20,000 PSI / 1,379 bar. For permanent connections, and these elevated pressures, system builders would typically use either welded or 'cone and thread' style fittings, which are time consuming and expensive to install. Compared with these products, Parker Instrumentation estimates that its new Phastite connectors could reduce installation costs by a factor of 90% or more.
The connectors are supplied as one-piece components. To make a joint, all that's required is to insert the tube, and then push the collar along the connector body until it reaches a dead stop. This operation is performed by a simple handheld hydraulic tool and takes a few seconds.
Phastite is much faster to assemble than welded and cone and thread fittings and deskills the process, removing a major element of industrial system building cost.
The Phastite range includes straight union, union elbow, 'tee' and union cross connector shapes in imperial and metric sizes from 1/4 to 1/2 inch or 6 to 12 mm.
|
|
| We provide a large range of cutting-ring technology, including single-edged cutting rings as well as proven double-edged rings and even modern, soft-sealed cutting rings. |
|
Items :
. Elbows
. Tees
. Reducing Hex Bushes
. Hex Nipples (equal or reducing type)
. Barrel Nipples
. Extension Pieces
. Round Reducers
. Conical of German Type Hex Nuts
. Compression Nuts for mixer and line connectors
. Pipe Clips and Saddles
. Brass Hose Nipples/Fittings
. Bushes
. Flanged Plugs
. Back Nuts
. Male extensions
. Radiator Keys
. Air rents and caps
. Olivs
. Couples, Union Socket, etc
. Manifolds and Saddles |
|
- One Piece Brass Alloy construction for easy removal and assembly.
- Easy length adjustments.
- Tapered thread provides an excellent leak-free seal. |
|
Style 38 Couplings
Proven by years of service on all kinds of pipe, Dresser Style 38 couplings provide flexible, leakproof connections that last the life of the pipe. No costly threading, beveling, exact pipe fitting or alignment is required. The resilient Dresser gaskets absorb vibration and pipe movement and permit curves to be laid with straight pipe lengths. Installation is safe and sure. There's no hazard to workmen or delays due to weather. Dresser Style 38
couplings are available from 1/2" ID to over 400" OD.
NOTE: Commonly used sizes are listed in the tables, but couplings can be
furnished for practically any size or special condition. |
|
As demonstrated by our product certifications (AENOR, AFNOR, Kiwa, etc.), Cepex offers the highest-level guarantee for all its PVC Fittings for pressurized fluid handling applications. The extensive range of sizes and combinations we offer will accommodate any system design. The dimensions of our fittings comply with UNE-EN 1452-3, UNE-EN 1452-3, DIN 8063, and NF 54016/54029 standards, while many of our products meet other standards as well, including British, ASTM and Thai.
|
|
The U-PVC range is a system of products complete of: fittings for solvent welding, threaded connection and manual or automatic valves for use in the construction of process and service lines to convey industrial fluids at maximum operating temperatures of 60°C.
The entire range is produced using U-PVC resins compliant with the standards EN 1452 and ISO 4422 and in observance of the requirements of DIN 8063 and EN ISO 15493 for the use of plastic pipes in industrial processes. |
|
Mechanical Fittings
Fittings for Solvent Cementing
Fuseable Fittings
COOL-FIT
Double Containment
Multilayer Fittings
|
|
This technology allows easy and instant connection by hand, without the use of tools.
- time saving and simplicity of installation.
- full flow (no restriction to passage) as gripping and sealing are achieved using the outside of the tube.
- automatic sealing by means of the O-ring seal and the optimised design of the tube.
- compactness of installation: no access required for a tightening tool. |
|
Fittings with bush EO2 + machines EOMAT ECO/UNI
Description:
Fitting with bush high pressure guaranteed without escapes and simple and reliable machines of assembly
Advantages:
*Raccord with bush EO2:
- with seal elastomer for a total absence of escapes
- very simplified assembly (loss of the impossible bush, mechanical stop unit)
- unlimited assemblies, disassemblings (possibility of changing the seal)
- high resistor with corrosion (500H with white rust
*Machines of assembly EOKARRYMAT and EOMAT ECO/UNI
- simple and reliable
- portable and autonomous (EOKARRYMAT)
- tubes of 6 with stainless and steel 42mm
- economic (2 X faster than a manual assembly) "
Applications:
Fittings with bush EO2 associated with the machines with assembly EOKARRYMAT and EOMAT ECO/UNI are used successfully in a multitude of industries where fluids are conveyed under pressure
|
|
Fittings(Synapse)
Flare Type (Ferrule Type)
With flare type, a ferrule called a "Seal Joint" is attached for easy connection. The Seal Joint is a component molded in a flange shape. Simply insert the Seal Joint into the end of the tube for use.
Flange Type
A flange type is used for tubing made of plastic like PTFE, and has a simple structure.
Before use, the tube end should be enlarged like a trumpet and pressed into the bottom of a valve port.
Male Connectors & Male Elbows
PT Male Connector
PT Male Elbow
LPT Male Connector
LPT Male Elbow |
|
Series 9000
Series with ball bearings and bellows sealing assembly
Available in stainless steel
CD-Cartridge-Design
Recommended medium Heat transfer oil, Air, Steam, Water, Non-toxic industrial gases, Lyes (on request)
Available sizes 1/4" - 4"
Max. speed 1500 RPM (depending on size)
Max. temperature 190 °C
Max. pressure:
Water 17,0 bar
Steam 10,2 bar
Heat transfer oil 6,8 bar
Air 6,8 bar
|
|
Series 9000 G
Series with graphite bearings or ball bearings with solid lubrication and bellow sealing assembly
Maintenance-free
Available in stainless steel
CD-Cartridge-Design
Recommended medium Heat transfer oil, Steam, Water, Air
Available sizes 1/4" - 4"
Max. speed 700 RPM (depending on size)
Max. temperature 315 °C
Max. pressure
Water 17,0 bar
Steam 10,2 bar
Heat transfer oil 6,8 bar
Air 6,8 bar
|
|
Series 7100
Brass housing
N-model Carbon graphite to tungsten carbide seal
D-model Tungsten carbide to tungsten carbide seal (for applications with poor filtration water, or abrasive fluids)
Recommended medium: water, heat transfer oil, steam
Available sizes: 1/4" - 2"
Max. pressure
water
sizes 1/4" - 1 1/2" 50,0 bar
size 2" 40,0 bar
steam 8,0 bar
heat transfer oil 6,5 bar
Max. temperature
heat transfer oil 200 °C
steam 170 °C
water 175 °C
Max. speed
sizes 1/4" - 3/4" 3500 RPM
size 1" 3000 RPM
sizes 1 1/4" - 1 1/2" 2500 RPM
size 2" 750 RPM |
|
Stainless steel construction
N-Modell Carbon graphite to tungsten carbide seal
D-Modell Tungsten carbide to tungsten carbide seal (for applications with poor filtration water, or abrasive fluids)
Recommended medium water, heat transfer oil, steam
Available sizes 1/4" - 2"
Max. pressure
water
sizes 1/4" - 1 1/2" 50,0 bar
size 2" 40,0 bar
steam 8,0 bar
heat transfer oil 6,5 bar
Max. temperature
heat transfer oil 200 °C
steam 170 °C
water 175 °C
Max. speed
sizes 1/4" - 3/4" 3500 RPM
size 1" 3000 RPM
sizes 1 1/4" - 1 1/2" 2500 RPM
size 2" 750 RPM |
|
|
|
