|
|
In ECAS we manufacture heating cables, parallel or serial, applicable to all those situations where heating is needed.
Model CTCS, parallel heating cable constant power, allows to be cut on site.
Characteristic
Current: 125V, 230V, 380V
Power: 10-50 W/m
Conductor surface: 2 x 0.75 mm², 2 x 1.5 mm² y *2 x 2.5 mm² (*Unique on the Spanish Market)
Insulation between conductors: Silicone
Outer covering insulation: Silicon, P.V.C, metal screening, etc.
Supply
.In reels from 100 to 500 metres
.In sections with lengths adapted to any project, ready to be installed.
Model RFS and RFSS, electric flexible serial resistance
Characteristic
Operating voltages: 12v, 24v, 48v, 110v, 125v, 230v, 380v... 750v.
Power output at 230 V: 8 to 60w/m
Maximum operating temperature: 180ºC
Maximum circuit length: According to model
Heating conductor: Ni/Cr 80/20
Core : Woven glass fibre
Type of insulation: Thermal Silicone, Glass fibre, P.V.C, etc.
Supply
.In reels.
.In groups already finishes, according to longitudes.
.With diameter of the Isolation: 2,9mm, 4mm (normalized), 5mm, 6mm.
Applications
Electric radiant floor, snow melting systems for ramps, roofs and gutters, trace heating for pipes and storage tanks, drum heaters, etc.
|
|
HEATING CABLES - HC3/EX-HC3 - for industries and hazardous areas.
Thermo Heating Cable HC3 are the hardy and tough heating cable. When the ambient runs low, strap our workhorse heating cable and keep the fluid flow.
Heating Cable HC3 maintains temperatures in pipelines and storage tanks to keep fluids in flow state. They are the ideal for process heating requirements in Oil & Gas, Petrochemical, Power, Chemicals & Fertilizers, Metallurgical, Cement, Pharma, Food and Edible oil industries.
Construction
Heating Cable HC3 is a series type heating cable with single conductor (multistrand, spiraled) heating element with a primary PTFE (Teflon) insulation, metal braid and an outer PTFE sheath. Each length of heating cable HC3 requires termination kits with cold lead for power connection.
|
|
At ECAS, we manufacture heating cables and flexible electric elements, for temperature control systems in networks of pipes.
The main purpose of pipe tracing is to avoid and compensate for the loss of heat certain fluids undergo during particular production processes.
Of utmost importance is that the fluid or product flowing in the pipes does not freeze, change viscosity, or harm the piping network.
For sanitary hot water systems, our pipe tracing system avoids the cooling of the water, especially when it is not moving, avoiding the spread of Legionnaire disease.
Heating cable:
For pipe tracing projects we recommend constant power parallel heating cable, model CTCS.
The parallel heating cable has a constant lineal wattage even when it is cut to required length.
Control and regulating :
We have different types of control and temperature regulating solutions, which are adaptable to all kinds of projects, and/or the needs of our customers.
Below are some of the control systems:
DPA: Control and regulation box to connect between 1 and 4 circuits, from 8A to 63A at 230V.
EWDR 902 - T: Digital Thermometer/Thermostat.
ETV - 1991- P: DIN/Omega rail electronic modular analogue thermostat.
ETN - 2P - 1441: DIN/Omega rail electronic modular analogue thermostat with mini-switchboard.
|
|
HEATED HOSES - for gas and liquid transfer.
During Gas Analyzer Sampling, Hot Melt Transfer, Petroleum or Chemical Transfers, or Food Processing, it is needed to maintain critical temperatures, to avoid condensation of gas or drop in fluid temperature. Thermo Heated Hoses aptly cater to this need, by ensuring that the fluid in the process tube (part of the heated hose), looses no heat.
These flexible and lightweight tubes can withstand aggressive high pressure fluids and high temperatures involved in transfer of fluids.
Construction
Heated Hose comprises of a process tube bundled with insulated electrical heating element and wrapped with a heat reflecting foil. Temperature sensor is provided at about 300 mm from power connection end. This bundle is insulated and provided with an outer jacket. Ends are sealed suitably and electrical connections for both power and control are brought out.
|
|
INTERTEC offers the widest selection of explosion-proof heaters worldwide.
- ATEX/CENELEC approvals for Europe
- CSA/NRTL approvals for America
- GOST approvals for the Russian Federation
Our EX-heaters in combination with EX-controllers satisfy all requirements from freeze protection as well as high demands in the analyse technic.
For further questions please contact: Tel.+49-9445/9532-0
|
|
THERM HI "smart heater" is a system consisting of
an explosion-proof electric heater and a
microprocessor, designed to control the air
temperature in instrument enclosures and protective
cabinets and to limit the surface temperature of the
heater.
The "option E" is equipped with an intrinsically safe
sensor, thus allowing measurement and accurate
regulation of the temperature of the instruments and
equipment (e.g. of manifolds).
... THERM HI heaters are designed to solve
sophisticated and complex heating problems in
hazardous areas, and in particular for high
temperature maintenance of analyzing equipment.
|
|
Rica Electronics Leader in heating elements electronic control. Mission:
Design and production of higly innovative electronic controls to be integrated in Rica heating elements in order to supply complete solutions. Rica Electronics is a in-house team of electronic designers linked to the Automation and Electronic Development Center of Zoppas Industries. This Center was created 18 years ago and it is in charge of develop all the hardware and the software for Sipa Machines (PET bottles). During this period we have installed more then 200.000 temperature regulators aboard Sipa Machines and many axis controls, proprietary CPUs etc. Rica Electronics has developed a wide partners network to assure the most complete and strongest support to its customers. This network includes companies with own technology and professional skills
|
|
Applications:
Heating of pipes, containers, pumps, filter, flanges, connections of the heating hose.
|
|
Applications:
These can be fabricated for use in warming tables, cabinets heaters, cooling tables, heating plates for form carriers or even radiating heaters for household use.
|
|
|
Fast Heat offers variety of band heaters to accommodate any cylindrical application. Fast Heat's product offering ranges from the patented better band using mineral insulated technology to the better belly band used for compressor applications.
|
|
HEATING BELTS - FLEXBELT ® FCH
Heating belts for refrigeration compressors FCH heating belts are fitted to refrigerating compressors to prevent the coolant from being absorbed by the oil.
The lower the temperature, the quicker and the more complete the absorption, which can seriously damage the compressor, especially when starting up, through lack of lubrication.
To ensure that these heating elements enjoy a long service life, we recommend using a control device.
TECHNICAL CHARACTERISTICS :
• Quick, safe and easy to fit.
• Sealed, silicon-insulated heating element.
• Metal earthing braid.
• 230 V as standard.
• UL Recognized belts on request.
|
|
Band heaters are manufactured according several technical specifications in order to give the best solution to each applications, they are divided into: nozzle band heaters, mica band heater, ceramic band heaters.
Nozzle band heaters: small dimensions or with braze welded cap, several cable exits available. They are used mainly to heat nozzles of injection moulding machines.
Mica band heaters: round or flat, mica heaters are used to heat cylinders of injection machines and extruders, they can also be used in woodworking, medical and scientific machineries, packaging machines, industrial ironing.
Ceramic band heaters: mainly used to heat injection machines, extruders and blow moulding machines. Ceramic band heaters can be supplied with second or third insulation layer for energy saving and safety protections.
Heating cooling systems: Rica is leader in the extruders field, manufacturing several types of heating and cooling systems equipped with mica or ceramic band heaters, with or without aluminium fins, with or without insulation, inside a stainless steel cover round or octagonal with a hole for blower's air to cool down the cylinder.
|
|
Led by the high performance MI (mineral insulated) Band heater, the patented, flexible THINBAND® heater and the standard mica band heater for specialized constructions, Watlow's band and nozzle heaters are ideal for every type of plastics processing equipment.
Applications
Extruders
Blown film dies
Injection molding machines
Other cylinder heating applications
|
|
- Rugged stainless clamping band holds heater tight for maximum heat transfer
- Nickel/chromium resistance ribbon for uniform heat distribution
- Tybe B leadwires:
- U.L. Recognized rating
- Continuous 450°C service
- 12" leads
- High emissivity sheath:
- Aluminized steel/td>
- Temperature range to 900°F
- Rust resistant
- Mica insulation:
- Uniform thickness
- Moisture resistant
- Excellent electrical insulation
|
|
|
Since 1957 Fast Heat has been designing and building quality cartridge heaters utilizing only the best materials and state of the art manufacturing techniques. Understanding that every application is unique, Fast Heat has a broad range of products, termination styles and sizes to accomodate your needs.
|
|
hotrod® cartridge heaters (type HHP and LHT) are core products of hotset´s tradition. Excellent knowledge, high-quality materials as well as the outstanding manufacturing guarantee long life and excellent product features.
By intensive cooperation – also with special applications – hotset gives again and again innovative impulses to its cartridge heaters with new technical features (e .g. humidity-resistant connection area).
By optimal production conditions of Hotset Malta Ltd. an unique price-performance ratio can be achieved for larger quantities. Hotset cartridge heaters offer high functionality and high production safety – driving quality!
|
|
|
Specific for the cartridge heater is the single-sided connection, granting high perfomance in terms of temperature and power. All application sectors are covered by this heating elements, cartridge heaters.
|
|
Vulstar® cartridges are used to heat metal like moulds, dies, plates and bolts or liquid.
Supply voltage up to 450 V 1P or 3P.
Load up to 40 W/cm2.
Length from 25 mm to 2500 mm depending on diameter.
Diameter from 6,35 mm (1/4") up to 31,8 mm (2" 1/4).
Different types of connection to fit with the ambient temperature.
This cartridges can be provided with a thermocouple .
|
|
The Watlow FIREROD® heater enters its 50th year of industry leading expertise as the premier choice in swaged cartridge heating. With premium materials and tight manufacturing controls, the FIREROD heater continues to provide superior heat transfer, uniform temperatures and resistance to oxidation and corrosion even at high temperatures.
FIREROD offers many delivery programs to meet your needs: same day shipment, Ship-to-Stock or Just-in-Time. And our experience in customized engineering is reflected in over 250,000 FIREROD cartridge heater designs. Stock or made-to-order, the Watlow FIREROD delivers heat in a hurry.
Applications
Molds
Dies
Platens
Hot plates
Sealings
Fluid heating
Life sciences
Aerospace
Semiconductor
Foodservice equipment
|
|
hotset presents a wide product spectrum of hotspring® coil heaters:
- Starting with WRP / Micro up to WRP / Maxi with different lenghts and diameters.
- Brass-coil heaters or coil heaters with clamping mechanism as heating elements for different applications.
- Heating systems such as the hotcast® sealed heater (GMH) or the hotcone® heated nozzle (BMD).
- Special products such as hotslot® and hotslight®.
- As well as a wide spectrum of applications.
hotset was already in 1980 one idea ahead as they presented the first round coil heater (type WRP Ø 3.3). Since then further innovations have been made: WRP / Mini, flat and square coil heater (WRP / F resp. WRP / Q), WRP / Maxi as well as WRP / Micro.
This innovation as well as the humidity-resistant coil heaters according to I.P. 65 (WRP Ø 3.3 - WRP / F 2.2 x 4.2 – WRP / Q 3.0 x 3.0) emphasize the consequente alignment to new challenges.
|
|
Heaters for the thermo-regulation of enclosures, for application on DIN rail, and available in three version:
- with bipolar (15-30W) or three-pole (45-150W) power cable
- with three-pole terminal block (45-150W)
- ventilated (250-400W)
|
|
|
Condensation poses a particular risk for control electronics, especially with outdoor siting, but also indoors. Various different output categories ensure that the correct thermal output is always available. In this way, the total required thermal output can be distributed with complete accuracy within an enclosure.
|
|
Units for DIN or screw mounting.
TH heaters, installed separately from cooling unit, must be connected to a TMC thermostat. When used to prevent cabinet condensate they should be electrically connected also when cabinet is off.In this cabinet it’s better to install more heating elements with small heating power.In this way there is an optimal air temperature distribution.
|
|
Technical details
- Protection class I (ground wire) - protection type IP 54 (DK = IP 20)
- Temperature setting:
ON 25 °C - OFF 55 °C (operating temperature of heating
system itself)*
Tropical version possible: ON 35 °C - OFF 65 °C
-> Other settings upon request
- 2 Connecting alternatives (optional)
Connecting leads (AL) 0.5 m, 3 x 0.75 mm² PVC
- > Other lengths upon request
Lead out terminal (DK) 0.08 - 2.5 mm²
- Mounting position: vertical
- 2 fastening alternatives (optional)
Snap fitting for 35 mm DIN rail (figure 1)*
Screw fastening (figure 2)
|
|
PTC units for DIN bar application.
EH/FH heaters, installed separately from cooling unit, must be connected to TMC thermostat. When used to prevent cabinet condensate they should be eletrically connected also when cabinet is off.In this cabinet it’s better to install more heating elements with small heating power.In this way there is an optimal air temperature distribution.
|
|
-Large convection surface
-Clip fixing
-Ready for use
-Maintenance free
Compact convection heater for use in areas with explosion hazard for prevention of formation of condensation, temperature fluctuations and for protection against frost in transmitter housings, switch cabinets and measuring equipment.
Ex protection type:
-Ex d IIC T5 - Ex tD A21 IP6X T100°C
-EX d IIC T4 - Ex tD A21 IP6X T135°C
Conformity certificate:
-01 ATEX 6073/03, LCIE N° 06 ATEX Q8011, IECEx LCI 07. 0020
|
|
Heatflon® Serie PH 1 - 9
Heatflon® heaters of the PH series consist of a stainless steel tubular radiator sheated in PFA. The head of the heater is made of PTFE and the connecting cable of PFA. Heating zone, head and connecting cable are welded together watertightly as a result a complete immersion in aggresive media is possible.
All devices of the PH series are earthed and approved by association of German engieers (VDE).
As an optional extra, all heaters can also be pre-equipped for a thermal monitoring. Users who purchase a special controller are then able to monitor the internal temperature between the stainless steel heater and the PFA tube, thereby reducing substantially the risk of fire. Heatflon® tubular radiators of the PH series are available for various surface loads, eg:
2,2 W/cm² - 1,5 W/cm² - 1,0 W/cm², applicable dependent on the specific media.
|
|
|
Tubular heating helement use consolidated and established technologies utilising a spiral of resistive wire immersed in MgO compressed and protected by a metallic sheath. Tubular heating elements after annealing can be shaped to many geometries depending on the heating needs and foot print available
|
|
Electric immersion heaters are especially suitable for heating fluids via natural or forced convection. They are mainly used for water heaters, heating tanks and for fluid circulation heaters.
Depending on the application, they exist in different materials.
Their layout of heating elements allows an optimum heat exchange.
|
|
|
Watlow, a leading designer and manufacturer of heaters, controllers and temperature sensors, has added a miniature version cartridge heater to its existing line of FIREROD® cartridge heaters. The new 1/8-inch FIREROD cartridge heater features a unique swaged design, which maximizes heat transfer and allows for quicker response time. Additionally, its helically wound resistance wi | | |