|
|
| ... products without technical information |
| |
Craftsmen and construction workers value the many advantages of the practical heaters of the DZH series. Handy and problem-free to use, they are preferably suited for the de-icing or heating of construction materials, vehicles, equipment, water pipes, supply lines, and so on. These devices also provide for effective, immediate heat in closed, well-ventilated rooms
- Installed oil professional burner in a high-pressure system for EL heating oil or diesel
- Stainless steel combustion chamber
- Direct heater with 100% efficiency
- Integrated professional tank or Oil-reservoir professional fitting
- Easy to transport
- Fully automatic controls |
|
| ... products without technical information |
| |
HyFlex® 11-920
A revolutionary combination of excellent grip and strong oil-repellence.
Combining a sure grip on lightly oiled parts with keeping hands clean and protected from oil contamination has been a real challenge. Now Ansell introduces the uncompromising HyFlex® 11-920. Designed with patented Ansell Grip TechnologyTM, the glove provides an excellent grip on lightly oiled parts while protecting skin from oil contamination. The 11-920 also offers all the essential features of the HyFlex® range of industrial gloves, including durability, comfort and dexterity.
|
|
Oil resistant Nitrile gloves, light flexible and a great alternative to cotton and leather professional gloves.
Designed for wet or dry in light general purpose conditions |
|
HCT 603:
- coating nitrile, impermeable foam (thanks to process HCT) on support J13 Nylon
- palm and back 3/4 coatings
- without seam
- elastic wrist
- individual sachet
Sizes: 8/7/9 /10
EN388: 3121 |
|
Ogura’s multiple disk clutches and brakes come in both a dry or “wet” type. The wet (in oil) type can run approximately 3 times faster than that dry type. This is because the oil helps dissipate heat generated at higher RPMs, but you may find it surprising that the wet type can also produce higher operating torque, both statically and dynamically.
Ogura products are manufactured in Europe, North and South America and Asia. Manufacturing plants are ISO9001, 14001 and TS16949 compliant. Clutches and brakes are RoHS compliant.
UK, European and Scandinavian customers please contact Michel Hehnen at mhehnen@ogura-clutch.com. All other inquiries should go to Jim Andes at jandes@ogura-clutch.com. |
|
The Model HC or HCD clutches are designed to be used in either an end of shaft or through shaft mounting configuration. Their compact size makes these units ideal for incorporating within a gear housing. Multiple speed transmissions use a variety of these units to effect fixed mesh speed changes, or they may be used as a stand alone device for disconnect service.
All units incorporate provisions for forced oil cooling allowing high energy engagements to be made without causing themal distress within the disc pack. Cooling oil is introduced from an external supply through axial holes provided in the shaft.
Marine main propulsion forward/reverse or disconnect service, industrial winch disconnects, professional conveyor or mill soft-starts, and multi-speed transmissions are but a few of the applications for the model HC/HCD oil immersed clutches.
|
|
... see all the products in the category
Brakes
|
Realization professional cables details, ANTIOLIO, immersion.
Cut, sguainatura, spelatura from 0,12 to 200 mmq
Seam finishes them and capocorda to knots or preblocks, nastrati or melted.
Labelling to warmth or jet or with professional labels.
Working cables plates step 1,27 and 3,96
Supply Harmonized, special cables, UL, AFUMEX, TEFLON, TEFZEL
Resinatura cables with I rendered some epoxy
Sovrastampaggio cables
Visual tests and work them
Test of rigidity, isolation, short circuit, continuity.
Fatigue tests
Tests of traction
|
|
| ... products without technical information |
| |
DTSYB Boilers With Thermal Suppliers of heat exchangers
DTSYB and DTSYB-X Series is a single serpentine professional boiler that prepares hot water by the circulation of Thermal Red Hot Oil or Steam through its serpentine. The serpentine material in this Series is selected accordingly to the fluid, since the fluid to be circulated is oil based or steam. In X series it has an electrical command panel too. It produces hot water by the circulation of Thermal Red Hot Oil/ Steam or by the use of electric energy.
Floor Standing Type
Installation Way; Vertical
Avaliable to connect thermal line(red hot oil, steam, water)
Avaliable to Connect Industrial solar panel, Central Heating System, Central Heater Tank
Economically, High Efficient
200 - 2000 Liters Capacity Range
Bimetal Professional thermometer
Pressure Relief P Cock
Temperature sensor manufacturers Connection Hole
(Avaliable For Re-Circulation And Closed Line Pump Control)
Glass Wool / Polyurethane (Cfc Free) Insulation
Electrostatic Epoxy Coated Main Body
Drain Tap
Smart Apperance
2 Years Whole Warranty
10 Years Supplying Spare Parts Warranty
Optional Features
Avaliable Additional Industrial heating elements
Available Additional Electrical Command Panel
Temperature and Pressure T&P Valve |
|
The HMP228 is a fast, reliable and accurate on-line detection system for water in oil.
Moisture measurements from lubrication oil can significantly cut maintenance costs and prolong machine lifetime. The HMP228 measures water activity and temperature from oil. In connection with oil, water activity measurement offers several advantages compared to the traditionally measured variable, parts per million (ppm). Water activity indicates directly whether there is risk for free water formation. The measurement is independent of the type, aging or temperature of the oil.
|
|
| ... products without technical information |
| |
The oil control system controls the oil level in the manufacturers of compressor crankcase. The system consists of the following ESK-components:
• ESK – Oil Seperators
• ESK – Reservoir
• ESK – Oil Level regulators
• ESK – Pressure Cock
• ESK – Strainers
The oil carried over by a compressor in parallel systems has to be returned in the same quantity under all operating conditions. ESK-Oil control systems provides this control and works reliable.
Oil control systems are essential to control oil level if different compressor models are equiped in one a refrigeration system.
|
|
| ... products without technical information |
| |
TCAZ/TCASZ :
- Knurled plugs with dipstick
- Knurled plugs with dipstick and breather hole
TCA/TCAS :
- Hex plugs with dipstick
- Hex plugs with dipstick an breather hole
TMDA/TMDFA/TMDFA-BR :
- Filler breather with large breather hole and dipstick
- Filler breather with large breather hole, dipstick and professional filter
- Filler breather with large breather hole, dipstick and filter in sintered bronz
TMDFA/AL :
- Filler breathers with dipstick, anti-splash disc
TMDAV :
- Filler plug with one way air vent cock and dipstick
TPA/TPFA/TPAV :
- Press-fit filler breather with large breather hole and dipstick
TPBA/TPBAS/TPBAF :
- Low profile press-fit plug with dipstick
- Low profile press-fit plug with breather and dipstick
- Low profile press-fit plug with breather, filter and dipstick
TFA :
- Filler breather caps with internal thread and dipstick
AL/1 - AL/2 - ALS/1 - ALS/2 :
- Dipstick, press-fit with one seal
- Dipstick, press-fit with 2 professional seals
- Dipstick, press-fit with one seal and breather hole
- Dipstick, press-fit with 2 seals and breather hole |
|
Multipurpose oil and gas quenching industrial furnace with two chambers
Compact system for minimum space requirement
Gas quenching possibility allowing the treatment of huge grade of steel
Heating chamber held in temperature for important energy saving
Fully automatic handling device by deformable parallelogram and telescope
|
|
Technical data :
Max. temperature : 90°C
Frequency : 50Hz
Votage : 3x400V
Power : 3,5 kW
Capacity of the professional tank : 90 l
Inside dimensions : L 280mm, H 300mm, P 320mm
External dimensions (±10%): L 525mm, H 750mm, P 760mm
Equipment :
- Isolated metallic casing.
- Agitator at the rear of the tank to obtain a good uniform oil temperature.
- 2 immerged heaters with integrated temperature control.
- Tank cover.
- Oil industrial drain cock.
- Basket with handles for the quenching of parts and their draining off.
- Filling and working oil level indicators.
- Nominal power of the professional fan: 1500 m3/h. |
|
Our field power plants manufacturers range from 1 to 300 MW. Proven reliability, fuel flexibility and low emissions make the plants suitable for demanding applications in the oil and gas industry, such as processing facilities, pump stations, compressor stations, marine terminals etc.
Modular design
The modular design of our field power plants enables trouble-free installation and fast-track delivery anywhere in the world. Prefabricated, functionally pretested modules guarantee consistent quality and performance. Site installation is simply a matter of assembling and connecting the modules.
Smaller initial investment
As your needs change you can change the plant size by adding additional generating sets. This means you can get started with a smaller initial investment.
Multifuel capability
Our power plants can be run on either associated gas or crude oil, residual or diesel oil. This enables the operator to choose the fuel with the lowest price and best availability. The system is also tolerant against fuel quality variations and as such suitable for oil field power generation.
|
|
Our oil power plants range from 1 to 300 MW. High efficiency, low emissions and proven long-term reliability make these plants suitable for stationary and floating baseload, as well as stand-by applications. Worldwide deliveries of our liquid-fuelled power plants exceed 28 GW.
Modular design
The modular design of our oil power plants enables fast-track delivery anywhere in the world. Our 100 MW power plant can be in commercial operation in as little as nine months from order placement.
Prefabricated, functionally pretested modules guarantee consistent quality and performance. Site installation is simply a matter of assembling and connecting the modules.
Smaller initial investment
As your needs change you can change the plant size stepwise by adding or removing generation sets. This means you can get started with a smaller initial investment.
|
|
To measure various climate and processes values with a handheld, user-friendly instrument requires extraordinary measurement technology. The handheld meter of the OMNIPORT 20 series meets these multiple demands.
The selection of the appropriate sensing probe and accordingly the configuration of the handheld meter allow for displaying the following values with the highest accuracy:
relative humidity RH
temperatur T
dew point temperature Td
absolute humidity dv
mixing ratio r
air velocity v
water activity (in oil) aw
water content (in oil) x
The robust housing of the OMNIPORT 20 allows usage in harsh industrial environments.The readability of the large illuminated display is excellent. The easy to understand menu and the practical thumbwheel navigation offer outstanding comfort.
An optional carrying case can accommodate the display unit, up to 5 sensing probes as well as accessories such as cables and calibration kits.
|
|
|
