|
|
During cross-head extrusion, the pre-treated pipe passes continuously through the die.
A vacuum is created between the coating material and the steel pipe so that the coating is drawn against the pipe on all sides as it leaves the die and bonds with the pre-treated pipe surface
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
Features:
- High coating hardness
- Good adhesion
- Resistance to wear and corrosion
- Coating thicknesses from 0.05 - 2.0 mm
- Component sizes from 5 - 800 mm
- Service life is increased by up to 10 times
- All metal components can be coated
- Many different coating types: cemented carbide, stainless steel, copper, aluminium, tool steel, etc. |
|
Powder Coating Ovens
Gruenberg's 96 cubic foot modular walk in oven offers many benefits to the paint, powder, and coatings industry. Our MPC45.96 powder coating oven features a bolted flange angle construction that allows for the back wall panel to be removed to add an additional 96 cubic foot module, doubling the production capacity.
Features include:
Cold rolled steel exterior
Lift hooks for easy location
Aluminized steel interior
Ceiling capable of supporting a hanger bar loaded with 250 lbs
Two circulation fans with a total of 1200 CFM
Circulation motors totally enclosed in control panel
Split double doors available to reduce floorspace requirements
18KW of heat input per heating module
Seamless, tubular heating elements
Controlled by solid state relays
Watlow high limit thermostat for safety
All necessary fusing to protect components
Single setpoint temperature controller
Digital process timer to shut heat off at end of timed cycle |
|
Short Wave Mobile Infrared Heaters
Models IRT 301 (3 kW), 302 (6 kW), 402 XLNC (12 kW), Crane 5400/42 XLNC
* Reduction of the polymerisation time
* Drying surface area varies according to the models: 0,9 m2 (9,7 ft2) 1,44 m2 (15,5 ft2) / 2,80 m2 (30,1 ft2)
* Pre-programmed baking cycles (according to the finishing products) / according to the model, detection and automatic setting of distance / positioning guided by laser beam
* Designed for drying of putties, weighting finish, lacquers and varnishes used in collision repairs
* This type of equipment can be configured with overhead gantry for integration in preparation bays |
|
Pycnometer, Model 290
To measure the density of coating materials and similar liquids. Robust and light weight design, made of black anodized aluminium, or alternatively, stainless steel. Available for 50 or 100 ml capacity, also with official calibration certificate. |
|
ASP'S WASHABLE COVERS are made of industrial fabrics coated on one side only. This ensures that they can be successfully washed (in water or solvent) and thus used for a number of years. Satisfying your detailed requirements in full, our tailor-made design ensures maximum efficiency without restricting the robot's movements in any way. The covers can be changed (taken off and refitted) quickly, with no tooling required. This enables you to maintain high productivity. The covers we supply all meet the acceptation criteria for paint-shops in full (no silicon-type non-stick agents...).
|
|
APPLICATION Suitable for producing adhesive tape, such as:
BOPP tape/Double-side tape/Kraft paper tape/Label sticker/Foam tape/ Cloth tape/Polyester and Release paper.
FEATURES Special designs, suitable for various kinds of materials.
Auto tension control.
Auto temperature controlling to suit refresh materials.
Special designs for heating system, high efficiency.
According to different types to design different coating method.
MAIN TECHNICAL PARAMETERS:
MODEL AT-500 AT-1000 AT-1300 AT-1600
Valid width 500 mm 1000 mm 1300 mm 1600 mm
Mechanical Speed 5-30M/min 5-80M/min 15-150M/min 15-150M/min
Coating average degree ± 0.025mm
Rewinding Edge Smooth ± 3mm
Mechanical Power 5-25 HP 20-45 HP 30-80 HP 40-100 HP
Oven Length Special design is available according to customer’s request
Heating Steam/Hot Blast/Thermal Oil/Electricity |
|
Steel tube with solid brass sleeve cover
Inner tube: Steel
Outer tube: solid brass 63/37
Available also with different finishings: polished and clear-lacquered, chome-plated, nickel-plated, nickel-matt, browned, circular and lenghtwise brush
Diameters between 9 and 40mm
Material strenghts: 0,8mm
Lengths: up to 5000mm
Same premium surface as full brass tubes, but with a considerable price advantage |
|
Sewage pump with ceramic coating Ceram C0
Applied in airless procedure. For interior and exterior surfaces in contact with the pumped liquid resistand against salt water and industrial sewage. Layer thickness 400µm, adhesion 15 N/mm2, solvents free. |
|
HPA Conformal Coating
Ref: HPA
Resistant to mould growth
May be removed with solvents such as Ultrasolve (ULS)
UV trace for inspection
Excellent dielectric properties and with a wide temperature range
Approved to US MIL-1-46058C
China Military Approval GJB150 and GJB4 (Naval)
For professional use only
Acrylic Protective Lacquer
Ref: APL
Offers excellent adhesion to all substrates
UV trace for inspection
May be removed with solvents such as Ultrasolve (ULS)
Wide temperature range and good dielectric properties
May be soldered through, allowing for repair
For professional use only
|
|
Dense phase high capacity pump, capable of pumping powders up to 4kg per minute.
Totally pneumatic operation, allowing placement in ATEX zones without risk.
Pumps powder in dense phase through small bore hose, reducing hosing issues.
The dense phase feature ensures that reduced air volumes are used ensuring a low pressure system.
Can be used for recycling oversprayed powder, or bulk feeding of powders. |
|
|
|
