|
|
Closure plugs GPN 300
Versatile, flat headed blanking plugs, delivered either with a small or a wider head diameter.
Finned plugs GPN 320
Disks in the shank area bring about a firm fit.
Covers GPN 340
Particularly suitable for recessed hexagon socket head screws (Allen screws).
Stoppers GPN 350
For use as stopper or cap; with cylindrical shank.
Tapered stoppers GPN 500
Solid construction, especially suitable for internal threads and drillings.
Screw-in plugs GPN 550
Self-tapping stoppers with practical gripping collar.
Tapered plugs GPN 600
Numerous applications, including sealing drillings and internal threads.
Tapered plugs GPN 605
Solid tapered plugs, heat-resistant up to approx. 250 °C.
Universal protective plugs GPN 610
Internal or external protection for various applications.
Universal protective plugs GPN 620
Similar to the 610 Series, but with a larger cover flange.
Stoppers GPN 900
Cylindrical design, for universal application as stoppers or caps.
Covers GPN 910
Flat design is particularly suitable for the protection of openings in casings and pocket holes.
Protective plugs GPN 950
For internal or for external fitting. |
|
Screw caps
Pozidriv screw caps
Screw caps for Phillips screws
Screw caps for TORX screws
Rivet caps
Screw caps for countersunk TORX screws
Decorative screw caps
Allen screw caps
Caps for flat head screws
Caps for various screws
Covers for hex washer faced screws |
|
| The range of Skiffy caps and plugs is extensive and applicable for unlimited number of occassions, fasteners and tubes: protection caps and plugs, grease nipple caps, tube plugs, torx caps, cover caps, decorative plugs, ribbed inserts, etc. |
|
Grip seals GPN 305
For the protection of tubes, bore-holes and internal threads
Material: EVA
Colour: yellow
Grip stoppers GPN 310
Particularly suitable for the protection of bore-holes and internal threads.
Material: PE-LD
Colour: red
Grip stoppers GPN 315
Similar to the 310 Series, but with a larger cover flange.
Material: PE-LLD
Colour: yellow
Grip seals GPN 330
For the protection of bore-holes, internal threads and especially for pipe ends with screw-cap joints.
Material: PE-LD
Colour: yellow
Grip seals GPN 335
For the transportation and storage of hose fittings.
Material: PE-LD
Colour: yellow
Grip stoppers GPN 630
The stopper - flexible, rubber-like material - is inevitably rolled up during disassembly. |
|
| For quick and neat finishing of inside hexagon screws. Preventive solution against loosening up. Protect against dust and dirt. Very suitable for appliances and machine manufacturing. |
|
Floor leveling plugs GPN 265
Vertical adjustment by an adjusting screw with an extra strong hexagonal top.
Grip seals GPN 335
For the transportation and storage of hose fittings.
Dust caps and plugs for quick-seal couplings GPN 920
For quick-seal couplings. Integral retaining strap prevents accidental loss.
Dust caps and plugs for quick-seal screw couplings GPN 930
For quick-seal screw couplings; prevents the leakage of residual oil. |
|
I001: LxH
I. 20X10 I. 20X15 I. 20X16 I. 25X10 I. 25X15 I. 25X20 I. 30X10 I. 30X15
I. 30X20 I. 30X25 I. 35X10 I. 35X15 I. 35X20 I. 35X25 I. 35X30 I. 40X10
I. 40X15 I. 40X20 I. 40X25 I. 40X30 I. 40X35 I. 45X15 I. 45X20 I. 45X25
I. 45X30 I. 45X35 I. 50X10 I. 50X20 I. 50X25 I. 50X30 I. 50X34 I. 50X35
I. 50X40 I. 55X34 I. 55X40 I. 60X15 I. 60X20 I. 60X25 I. 60X30 I. 60X33 I. 60X35 I. 60X40 I. 60X45 I. 60X50 I. 65X35 I. 70X20 I. 70X25 I. 70X30
I. 70X35 I. 70X40 I. 70X50 I. 75X25 I. 75X50 I. 80X20 I. 80X35 I. 80X30 I. 80X40 . 80X50 I. 80X60 I. 90X20 I. 90X40 I. 90X45 I. 90X50 I. 90X70
I. 100X20 I. 100X25 I. 100X30 I. 100X40 I. 100X50 I. 100X60 I. 100X80
I. 110X60 I. 110X70 I. 120X30 I. 120X40 I. 120X50 I. 120X60 I. 120X80
I. 120X100 I. 140X80 I. 150X50 I. 150X100
|
|
I003: Diam.
I. 10 to I. 160 mm
|
|
Square plugs GPN 260
For special section tubes, press fit by means of distinctive disks.
Floor leveling plugs GPN 265
Vertical adjustment by an adjusting screw with an extra strong hexagonal top.
Rectangular plugs GPN 270
For special section tubes, press fit by means of distinctive disks. |
|
I002: LxH
I. 10X10 I. 12X12 I. 13X13 I. 15X15 I. 16X16 I. 18X18 I. 20X20 I. 22X22
I. 25X25 I. 28X28 I. 30X30 I. 32X32 I. 34X34 I. 35X35 I. 38X38 I. 40X40
I. 45X45 I. 50X50 I. 52X52 I. 55X55 I. 60X60 I. 65X65 I. 70X70 I. 75X75
I. 80X80 I. 90X90 I. 95X95 I. 100X100 I. 110X110 I. 120X120 I. 140X140
I. 150X150
|
|
Threaded plugs GPN 700
Available in a wide range of thread types and sizes.
Threaded plugs GPN 710
With collar and slotted external square for simple assembly.
Screw plugs GPN 720
Retractable screw-stopper with hexagon socket.
Sealing plugs GPN 730
The rotating sealing lip, within certain limits, prevents the admission or leakage of liquids.
Sealing plugs GPN 735 / 736
Thread openings are protected from the admission or leakage of liquids, within certain limits.
Sealing screw plugs with O-ring GPN 737 / 738
The sealing screw plug corresponds to GPN 735/736, but is additionally fitted with an O-ring. |
|
Type: NA
General closure that can be used as a cap or plug for internal or external protection. It is therefore ideal for connection ports, inspection holes, metal and plastic piping, etc. The product can be supplied with a vent hole if required. Some sizes are available in soft materials, EVA and TPE. |
|
CTR :
- Filler breather with strainer - Tank top mount
CTR/2 :
- Filler breather with strainer - Tank top mount
FSB :
- Metal filter breather with strainer |
|
TCAZ/TCASZ :
- Knurled plugs with dipstick
- Knurled plugs with dipstick and breather hole
TCA/TCAS :
- Hex plugs with dipstick
- Hex plugs with dipstick an breather hole
TMDA/TMDFA/TMDFA-BR :
- Filler breather with large breather hole and dipstick
- Filler breather with large breather hole, dipstick and filter
- Filler breather with large breather hole, dipstick and filter in sintered bronz
TMDFA/AL :
- Filler breathers with dipstick, anti-splash disc
TMDAV :
- Filler plug with one way air vent valve and dipstick
TPA/TPFA/TPAV :
- Press-fit filler breather with large breather hole and dipstick
TPBA/TPBAS/TPBAF :
- Low profile press-fit plug with dipstick
- Low profile press-fit plug with breather and dipstick
- Low profile press-fit plug with breather, filter and dipstick
TFA :
- Filler breather caps with internal thread and dipstick
AL/1 - AL/2 - ALS/1 - ALS/2 :
- Dipstick, press-fit with one seal
- Dipstick, press-fit with 2 seals
- Dipstick, press-fit with one seal and breather hole
- Dipstick, press-fit with 2 seals and breather hole |
|
| Funnels, Stoppers for laboratories, Protective stoppers, Joining pieces and stops for furniture use. |
|
TYPE: DD
The oval shape of the pull ring ensures a good hold on the plugs. As the pull rings lay tight to the plug, they are not easily dislodged when tubes are bundled. Ergo-Line type DD can be removed easily and quickly by using two fingers and no tools. It is recommended for several applications as rubber hoses, air condition systems, heat exchangers, etc. |
|
TYPE: DN/DS
Long plug with large flange especially suitable for sealing the female part of quick connectors on brake and fuel lines. The length of the plug ensures tight internal closure. The flange protects the external surface, and makes the plug easy to remove. Most of them are with or without tabs, to match packaging and ergonomics.
Some plugs meet the requirements of SAE J2044 standard; therefore the dimension given for the diameter is not that of the plug itself but of the nominal size of the pipe for which it is suitable. |
|
TYPE: NS
NS type is a tapered plug with tab, which makes the plug easy to remove after use. This plug is suitable for hoses and flexible tubes. |
|
PF :
- Protection plugs
PFN :
- Pre-threaded protective plugs
01 S/T :
- Protection plugs for female threads
13 PT :
- Pipe protection caps |
|
TYPE: DA
The DA type is ideal for holes in plate work as a cover plug, or in pipe ends when a smooth finish is required. The head of the plug is flat. |
|
TYPE: TA
Threaded plugs that effectively protect internal threads in hydraulic components are particularly appreciated for their tightness and quality.
The following items are broadly used for injection systems, power steering and braking systems for OEMs or Aftersales.
These products are available in various materials with different features. Those with washer are excellent for water and oil tightness. |
|
The SEAL-PLUSTM
restraining end features...
- A proven wedge-shaped gasket... a
Dresser benchmark for over 100 years
- Common end assures uniform installation procedure for the entire product line...no need for additional training
- Mechanically loaded gasket pressure for a positive seal
- Volume compensating spring washer adjusts and maintains gasket pressure
- External grip on plastic...meets all D.O.T. code requirements
- Bottom-out tightening provides a visual verification of proper installation
- Simple, quick installation...easy stabbing at low temperatures
- Pressure and temperature ratings equal to the P.E. pipe
The design of the SEAL-PLUSTM Restraining End delivers many proven features which contribute to both ease of installation and permanent, leak-free service. There's a proven wedge-shaped gasket, a Dresser benchmark for over 100 years. And a volume compensating spring washer that adjusts and maintains the gasket pressure, even at extremely low temperatures.
Visual verification of proper installation is attained through ottom-out tightening of the nut against the body. A color code on he insert verifies that it is properly sized for the wall thickness of he tubing on which it is being installed. |
|
- Material : Polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.
- Maximum continuous working temperature
120°C. |
|
Flange covers GPN 640
For the protection of SAE flanges during painting, transport or storage.
Flange covers GPN 650
Seals the aperture and protects the sealing face of DIN-type flange fittings.
Flange covers GPN 655
Seals the aperture and protects the sealing face of ISO-type flange fittings.
Flange covers GPN 670
Broad range of applications through fins; sealing face and screw holes are protected.
Flange caps GPN 680
Hook-snaps provide secure fits during handling.
Protective caps GPN 690
For the protection of SAE flange collars, pipe ends and hose-fittings. Easy and secure fitting. |
|
The use of SFW/WP pressurised breather cap which create a pressure plenum chamber right above the oil level within tested limit conditions, in order to avoid any reservoir deformation, offers the following advantages:
- reduces reservoir air volume intake keeping clean oil and filter
- improves suction pump action during working conditions reducing cavitation phenomenon
- prevents fluid leakage when the system is part of a mobile unit
- reduces foam in fluid. |
|
|
|
