|
|
The working quality does not mean the processing quality only, but it considers also other aspects such as productivity growth, exercise cost reduction and working place hygiene.
The TYROLIT diamond saws for conventional and fast lowering frames offer a precise and long lasting answer to the cutting requirements of all materials, even the hardest and most difficult to be sawn, such as hard colored marble and superabrasive or extra hard sandstone.
|
|
|
Sawing machine to fixed table and gantry furnishing devised for the cut of heavy pieces much and great dimensions. It allows the vertical, horizontal and oblique cut in order to operate correctly in the cut of lingotti and forged pieces as also large blocks for steel traders.
|
|
SHARK332 SXI evo
One model only to take place of the two leading models of its class: SHARK332 SXI and SX. Taking after the first one the high performances and from the second...the price !!!
Technical features::
Hydraulic unit equipped with high efficiency electro-valves and high pressure (200 bar) hydraulic pump;
Main electronic control of the machine made by new generation of microns and located completely inside the main control box;
Control box positioned on the front side of the steel base with a 180° swivelling which allows the operator to position it wherever needed;
Visualization by digital display of alarms, diagnostic, machine operations (cutting time, piece counter, blade motor amperage, head position, blade speed, blade tensioning);
Predisposed to be connected to SMV3000/3000 PRO;
Manual and semiautomatic-dynamic mode: STANDARD.
|
|
The point of force of this vertical sawing machine to flowing arc is the deep one sbraccio of the arc portalama, this allows to the cross-sectional cut of wide plates using a blade of inferior dimensions regarding the horizontal sawing machines since always comes employed in the cut of the smaller side.
The plan is constituted from sturdy rollers that support the material and of it they facilitate the feeding for the positioning to measure. The machine, available in the semi-automatic or equipped version of automatic feeder, is an indispensable sawing machine for the steel traders.
|
|
A range of bandsaws which combines accurate cuts and high speeds, adapted to all types of profiles used in steel construction.
Internationally well-known for their robustness, accuracy and speed of execution, Behringer saws allow the straight and mitre cut of all types of profiles.
Being a natural additional equipment to our HD fast drilling machines, the drilling sawing line represents the key element of the performance in steel construction workshops.
|
|
Band cutting off machines
Automatic machines and CNC
Capacity 90° mm : 260
- Drive in Kw : 0,9 / 1,5 - Cooling pump power in Kw : 0,12 - Hydraulic unit power : 0,55 - Blade dimensions in mm : 3100 x 27 x 0,9 - Cutting speed in mm/mn : 40/80 - Vice cylinder travel in mm : 800 - Vice cylinder travel (multiple) in mm : 7200 - Working height in mm : 845 - Overall dimensions in mm : 2820 x 1960 x 1850 - Uses : Hydraulic semi-automatic band cutting-off machine perfectly suited to sawing work in locksmith's, general engineering and maintenance workshops. It allows straight and mitre cutting of solid materials and profiled sections. - Standard equipment : Cutting counter, manual setting of the cutting length, 9 feedings stroke repetition, 2 cutting speed, capacity sensor, blade tension control by electric sensor, powered chip brush, roller table 1 meter long. - Optional features : Variable speed unit, powered chip conveyor, hydraulic vertical clamping, mist cooling, vice pressure control, infeed and outfeed roller table.
|
|
Horizontal bandsawing machines
Horizontal bandsawing and semi-automatic machines
Capacity 90° mm : 450
Angle cutting : No
- Drive in Kw : 2,2 - Bandsaw dimensions in mm : 5300 x 34 x 1,10 - Cutting speed in mm/mn : 10/100 - Speed range in m/mn : 0/200 - Table height in mm : 820 - Overall dimensions in mm : 2400 x 2500 x 2100 - Uses : Semi automatic band sawing machine perfectly suited to sawing work in locksmith's, general engineering and maintenance workshops. - Standard equipment : Chip conveyor - Optional features : Mist cooling, infeed and outfeed roller tables, vertical clamping
|
|
Pinheiro Multiple Rip Saws and Double Edger, AMA series assures, with the great robustness and stability, as well as its unique double V guided feed chain combined with grooved top pressure rolls and its extra long arbor supported by 4 over dimensioned bearings, a perfect straight line cut.
With a motor power capacity up to 75 Kw / 50 Hz (100 HP) or 90 Kw / 60 Hz (120 HP) and a feed speed up to 40m/min - 130 ft/min, assure high levels of both quality and productivity.
An extensive option list makes this particular model a real customised machine.
|
|
Belt-Knife Blade Machine KMA 3055.01
Closed, modern designed machine casing in solid steel construction, pillar execution on the lefthand side, preventing doors, limit
switch protected. Slewable grey cast iron
table, flanged disk wheels vulcanized and
ground rubber coated, dynamicly balanced.
Precision roller guides on top and
bottom, upper guide height adjustable by a
handwheel, vibration absorbed spring suspension with knife blade charge indicator. Compact V-belt drive via three-phase current motor with safety brake, brake gear, motor protection with under-voltage release. Flow promising suction nozzle.
|
|
STANDARD EQUIPMENT
24 V illuminating attachment.
Welder included
Blade grinder
Emergency stop switch
Digital readout tachometer
|
|
Band cutting off machines
Semi-automatic machines
Capacity 90° mm : 220
Angle cutting : Right 30°
Capacity 30° mm : 85 x 85 - Drive in Kw : 0,5/0,7 - Blade dimensions in mm : 2450 x 27 x 0,9 - Working height in mm : 1000 - Overall dimensions in mm : 800 x 1500 x 1900 - Uses : Band cutting-off machine with gravity downfeed perfectly suited to sawing work in locksmith's, general engineering and maintenance workshops, it allows straight and mitre cutting of solid materials and profiled sections until 30° right. - Standard equipment : Clamping by eccentric handle, blade tension control by electric sensor, gravity downfeed. - Optional features : Variable speed unit, pneumatic vice, mist cooling, infeed and outfeed roller blade
|
|
Horizontal bandsawing machines
Capacity 90° mm : 280
Angle cutting : Right 45°
Jaw height in mm : 145 - Power in Kw : 1,9 - Cutting speed in mm/mn : 35 et 70 - Working height in mm : 745 - Overall dimensions in mm : 1800 x 900 x 1850 - Uses : New, simple and sturdy horizontal bandsawing machine perfectly suited to sawing work in medium-sized workshops, it permits straight or mitre cutting of solid materials of any kinds, tubes and profiled sections. - Optional features : Adjustable stock stand, infeed roller table and discharge stray, mist cooling - Norm : CE
|
|
Machines
Power hacksaw machines
Alternating machines
Capacity 90° mm : 230
Angle cutting : Right 45°
Overall dimensions in mm : 1500 x 845 x 1430 - Uses : Economy and ease of use by the best value for money - Optional features : Adjustable stock stand, infeed roller table and discharge stray
|
|
|
With saw wheels from 1200mm to 1600mm diameter.
|
|
Vertical bandsawing machines
Mobile tables
Throat in mm : 600
Table sizes in mm : 600 x 760 - Table feed mm : 500 - Working height in mm : 1000 - Uses : Heavy duty machine allowing maximal efficiency in mechanics and foundries workshops. Specially dedicated to straight and contouring cutting in every kind of materials : steels, aluminium, composite. - Overall dimensions in mm : 2480 x 1465 x 1145 - Standard equipment : Cast iron table, work light - Optional features : Laser, foot emergency stop, mist cooling, tilting table on request
|
|
Automatic high performance bandsaw machines with 3000 mm sinfle stroke incremental feed unit
Automatic mitre bandsaw machines with 3000 mm single stroke incremental feed unit
|
|
Model Cutting capacity W x H [mm]
90° Mitre 45°
Round Rectangle Round
HBP220 220 360 x 220 190
HBP263 260 300 x 260
HBP303 300 300 x 300
HBP360 360 600 x 360 320
HBP430 430 600 x 430 320
|
|
Log and panel-cutting band saws
Heavy-duty, torsionally rigid design for the reliable and precise division of panels and logs. Short resetting times. Fast, simple saw band changeover.
The secret lies in the traversable saw frame, which takes up only half the space of a traversable table! And permits cutting lengths of up to 8m! Cutting range: 1600 x 1600 x 8000 mm.
|
|
Model Cutting capacity W x H [mm]
90° Mitre 45°
Round Rectangle Round Rectangle
KS150T 150 150 x 140 115 110 x 110
KS190 190 190 x 160 140 140 x 140
KS190N190 190 x 160 140 140 x 140
KS195HY195 180 x 180 110 110 x 110
220 x 160
|
|
| ... products without technical information |
| |
|
|
