|
|
Sutton Tools recognises the relentless challenge facing metal working industries to produce faster and more efficiently than ever before and is pleased to provide the high performance market with the most cost efficient cutting solution with the release of it’s High Performance Range of Taps.
The comprehensive range of high performance taps now includes Cobalt and Vanadium based grades of high speed steel (HSS-Co, HSSE-V), as well as the latest developments in Powdered Metallurgy high speed steel (PM-HSS) and Carbide ranges, manufactured to DIN standards, which are complemented by TiN, TiCNite, AITiN (multi-layer) and CrN ceramic surface coatings and state of the art Vacuum Heat Treatment.
There are so many variables that affect the final outcome, and hence overall cost effectiveness of a job, that selecting the right tap can be somewhat of a challenge
However the Sutton High Performance Range has simplified this task, by colour coding the tools to the material group in which it is intended for, allowing you to quickly select the most suitable tool for your job.
For more information on the High Performance Taps, visit our website on http://suttontools/IndustrialHSGTTaps
|
|
More than 3,000 screws are used in the production of a single automobile. Each hole drilled for a screw requires precise threading cut with a tap.
Noted accuracy and speed, OSG taps are used extensively by manufacturers, expecially of automobiles and aircraft, making OSG the No.1 taps producer globally.
Tapping is difficult? - No, it is easy!
- deep hole (up to 3XD) for stainless steels - CC-SFT
- tapping for heat resistant alloy steels - E series
- tapping Ti alloy steels - Ti Series
- tapping hardened steels up to 60 HRC - VX-OT
etc.....To request more information on this product, please visit our Literature Request Page |
|
Sutton Tools high speed ground taps and surface coatings are manufactured in Australia meeting international standards.
Developed with unique geometrics and available in a variety of surface coatings, the all-new Application Tap range ensures you have the right tap for your specific material application. |
|
Taps and Dies are produced in Halmstad, Sweden. Over the past few years the Tap factory has been completely re-organised to reap the benefits of cellular manufacture. This re-organisation combined with substantial investments has led to greatly improved quality and reduced lead-times.
|
|
RESISTOR OPAL MACHINE TAPS These Powder Metallurgy Taps are designed for machining hard materials up to 1000 N/mm2 with excellent results
You can download the information sheet from our Catalogue Section.
We invite you to visit us at ITM MACH-TOOL exposition in POZNAN (POLAND) 9-12 June 2008 |
|
Landis Taps Program
Landis offers both collapsible and solid adjustable taps with replaceable chasers. These two systems offer a low-cost solution to internal threading operations. |
|
Brubaker Tool has been manufacturing taps for over 125 years. Our company can trace its roots to specialized taps for the steam locomotive industry. This foundation in railroad taps led to the production of quality general purpose and special order taps. Over the past several years Brubaker has gained strength and expanded its presence in high performance, special application taps. Based upon these successes we are proud to introduce our Gold High Performance Tap Series. Our Gold Series will enable us to provide our valued customers with high performance taps as a catalog offering with off- the- shelf availability.
Our Brubaker Gold, High Performance Taps are yet another indication of our commitment to quality, growth and the support of American manufacturing. Whether your manufacturing needs call for a standard tap, high performance tap, special geometry, special or standard end mill, we can meet all of your round tool cutting needs. |
|
Fastcut Tool was founded in 1957 as a manufacturer of quality end mills. Following its acquisition by Talbot Holdings, Fastcut began to offer general purpose and special order taps in 1991. Over the past several years Fastcut has gained strength and expanded its presence in high performance, special order taps. Based upon these successes we are
proud to introduce our Gold High Performance Tap Series. Our Gold Series will enable us to provide our valued customers with high performance taps as a catalog offering with off- the- shelf availability.
Our Fastcut Gold, High Performance Taps are yet another indication of our commitment to quality, growth and the support of American manufacturing.
Whether your manufacturing needs call for a standard tap, high performance tap, special geometry, special or standard end mill, we can meet all of your round tool cutting needs. |
|
Recoil taps differ from standard taps dimensionally, and only Recoil Screw Thread Insert (STI) taps are suitable for use with Recoil wire thread inserts.
Recoil Taps are manufactured to precise standards from either HSS or HSS-E, and available in Tpaer, Intermediate, bottoming leads, or Spiral point and Spiral Flute for machine taps. |
|
These general purpose taps can be used by hand or under power, in through or blind holes and are suitable for tapping most materials. The chips are retained in the flutes during use.
Three-fluted taps have the greatest chip holding capacity and should be used, in the size range where available, for tapping holes deeper than 1-1/2 diameters. A variety of surface treatments are available to improve performance. |
|
These general purpose taps can be used by hand or under power, in through or blind holes and are suitable for tapping most materials. The chips are retained in the flutes during use.
Three-fluted taps have the greatest chip holding capacity and should be used, in the size range where available, for tapping holes deeper than 1-1/2 diameters. A variety of surface treatments are available to improve performance. |
|
| All sizes and kinds of taps and dies are available - including special sizes, irregular sizes, custom-made sizes and rarities. BAER offers taps and dies for all materials and all applications. |
|
The hole is drilled using a commercially available standard drill bit.
Then, insatallation is made with a manual or an automatic special tap for fitting wire thread insert. |
|
Rolling dies exploit the plasticity of metal to form screws and serrations by rolling rather than cutting. This process maintains the integrity of the material by preventing damage to it structurally. The absense of cutting also makes this a high-speed process.
Consequently, many forms, serrations, and splines used in the manufacture of automotive parts are now made using rolling dies.
OSG is the world leader in the production of rolling dies renowned for their high quality and level of technology.
To request more information on this product, please visit our Literature Request Page |
|
Landis Replacement Dies Program
Now you can get that world-famous Landis quality in a replaceable machine die for practically every major cylindrical die competitive brand on the market today from “Plain Annular Threaded” dies to the most demanding "Specialty" dies…you name it…now you
can get it…from Landis.
Dies are available up to 9” nominal O.D. with bore sizes to 3”. Got a machine die you want us to quote on? Just use the handy "Quik-Quote" form or call us toll free at 1-888-565-0386. We want your business. Give us the chance to earn it. Call us with any inquiry! You won’t be disappointed! |
|
| Our extensive experience and wide-ranging technological knowledge of thread, profile and cold ring rolling is the foundation for being a qualified die manufacturing source. Whether you require standard or special dies for high quality profiles, Profiroll has the ability to supply and support you with the innovative visions of the company. You will get solutions to complex technological problems, all from one source. From the design and manufacturing to testing in our facility and support at the customers facility ? by utilizing our complete die manufacturing process, we can respond to your needs quickly. Quality control and customer service are important to us. |
|
Sandvik Coromant is introducing a new family of rigid threading tools for the oil, gas and mechanical engineering sectors from Sandvik Coromant. These new tools provide a high level of stability for threading applications in demanding industries, where precision is paramount. A guide rail locks the insert in position to give stability for precise, repeatable thread cutting and assured indexing of the insert.
Sandvik Coromant has a new family of rigid high precision threading tools for the oil, gas and mechanical engineering industries, CoroThread 266. First to be launched is CoroThread 266 for 22mm and 27mm insert size.
Threading stability is achieved with a new design of iLock insert locking interface. This keeps the insert rigid, maintains the correct threading profile and reduces out-of-specification product rejection. The insert has a slot for each of its three indexible cutting edges. One slot is located on a raised guide rail on the new interface of the shim. This guide rail locks the insert in its correct position in the pocket, giving repeatable accuracy with each threading pass. Correct fitting and precise indexing can be done by touch alone, because the CoroThread 266 insert sits only on the guide rail, each time, every time and is screwed in place. It is impossible to misfit the insert with the new rigid rail technology, or for the insert to move once fixed. |
|
Dies are used for external threading. Manual threading is the most usual method although machine threading is sometimes used for simple tasks.
A solid die usually cuts more accurately than a split die. However, dies which are supplied solid may be split |
|
Adjustable re-treading tool for external male thread forms. No measuring of thread required, as the hardened stell blades will adjust automatically to any thread dia and pitch.
Usable for all kinds of threads, Inch and metric, right hand or left, fine and course. |
|
|
|
