Extraction fans

Air flow: 14 m³/h - 700 m³/h
Noise level: 27 dB - 75 dB

The 7F Series of fans and filter fans for cabinets and electrical panel are products to ventilate and safeguard against high temperatures. The range includes the following features (according to Type): ...

Rotational speed: 2,800 rpm
Noise level: 10 dB

Don't give hearing damage a chance! The Sound Absorbing Fan (SAF) reduces noise by more than 10 dB, reducing the risk of hearing damage. The exhaust fans from the SAF series are equipped with sound insulation ...

Air flow: 2,400 m³/h

... Flex, T-Flex extraction arms FAN-28 is a wall-mounted extraction fan FAN-28 is especially designed to fit the large diameter (200mm) arms in our ...

Air flow: 3,000 m³/h

... extention crane and stationary filter The FAN 42 is an extraction fan used for small welding fume extraction systems The FAN 42 is a wall-mounted ...

Air flow: 500 m³/h - 1,870 m³/h
Noise level: 52 dB - 63 dB

... radial fans on KryosROOF provide high flow rates and heads to ensure the correct airflow within the cabinet. In addition, there is a high efficiency version with EC fans and an active control probe, ...

Air flow: 1,000 m³/h - 35,000 m³/h

The Extractair® is a centrifugal fan that allows the evacuation of polluted air to the workstations. Installed on the roof and connected to piping networks, it is used to: - Cleaning and air renewal; - Cooling ...

Air flow: 1,000 m³/h - 35,000 m³/h

... and renewing, - cooling of hot environments, - acceleration of drying and evaporation, - extraction of vapours and steams. The Nylair® fans are axial fans covering a wide flow range ...

Air flow: 5,600 m³/h - 34,300 m³/h

... of centrifugal fans EXTRACTAIR® C are suited to various applications. Connected to a piping network they allow the polluted air extraction on workstations such as: - Suction of welding ...

Air flow: 0 m³/h - 1,000 m³/h

Fans are used in combination with duct on KEMPER welding smoke exhaust arms, telescopic arms and suction hoses. They are used for venting or ventilation wherever filtering the air is not important. Due ...

Air flow: 0 m³/h - 3,000 m³/h

Fans are used in combination with duct on KEMPER welding smoke exhaust arms, telescopic arms and suction hoses. They are used for venting or ventilation wherever filtering the air is not important. Due ...

Air flow: 2,000 m³/h - 4,000 m³/h

... . Applications For extraction tables, extraction hoods and extraction arms High levels of smoke and particles Non-stop operation Benefits Low investment costs because extraction ...

BAF - Fans For Extraction Arm Bomaksan branded BAF model fans are specially designed to work with extraction arms. Bomaksan BAF series fans are preferred ...

Air flow: 6,600 m³/h
Rotational speed: 2,890 rpm - 2,940 rpm

FUMEX FTE is a range of radial fans for use at high concentrations of dust-laden air. Fan housings and impellers are made from heavy-duty steel sheet for industrial use. The welded impeller has straight ...

Air flow: 15,000 m³/h
Rotational speed: 2,755 rpm - 2,950 rpm
Noise level: 70 dB - 94 dB

... has curved blades and is made from welded galvanised sheet metal. The fan complies with the ErP Directive and is optimised for use in conjunction with the Fumex fume extraction and automatic control ...

Air flow: 600 m³/h
Rotational speed: 2,800 rpm

... airflow of up to 600 m³/h (165 l/s). The fan is optimised for use together with Fumex systems for fume extraction and automatic control. C 600 is available in both 1-phase and 3-phase versions. The ...

Air flow: 33,600 m³/h

... rooms Fan motor situated away from the main air flow Can be connected to suction as well as distribution ducts Technical data TFV 900: Free discharge air volume: 33,600 m³/h Air ...

Air flow: 0 m³/h - 33 m³/h

Filter Fan FPO size 1 (92 x 92 mm) for climatising control cabinets and enclosures. Configuration: FPO – airflow direction: OUT (version: suction). Optimal filter fan for control cabinets: the Filter ...

Air flow: 0 m³/h - 117 m³/h

Filter Fan FPO size 2 (124 x 124 mm) for climatising control cabinets and enclosures. Configuration: FPO – airflow direction: OUT (version: suction). Optimal filter fan for control cabinets: the Filter ...

Air flow: 0 m³/h - 125 m³/h

Filter Fan FPO size 2 (124 x 124 mm) for climatising control cabinets and enclosures. Configuration: FPO – airflow direction: OUT (version: suction). Optimal filter fan for control cabinets: the Filter ...

NESTRO fans are the heart of every extraction system - proven, efficient and durable. If the fan is installed on the raw gas side, it blows into the filter system and is referred to as ...

NESTRO transport fans transport the material to be filtered, e.g. in long pipelines or in the event of high volume flow requirements. They support/relieve the burden on the extraction fans.

NESTRO fans are the heart of every extraction system - proven, efficient and durable. If the fan is installed on the clean gas side, it sucks air through the filter system and is referred ...

Air flow: 55 m³/h

The filter fans are required to ventilate your electrical and electronic equipment and protect them from dirt and dust thanks to its integrated filter. They are easily mounted on the side wall of the cabinet. It is ...

Air flow: 110 m³/h

The filter fans are required to ventilate your electrical and electronic equipment and protect them from dirt and dust thanks to its integrated filter. They are easily mounted on the side wall of the cabinet. It is ...

Air flow: 120 m³/h

The filter fans are required to ventilate your electrical and electronic equipment and protect them from dirt and dust thanks to its integrated filter. They are easily mounted on the side wall of the cabinet. It is ...

Air flow: 2,700, 3,850 m³/h

Portable extraction fan for welding fumes The portable FACILE extraction fan is particularly suited to protecting the operator from fumes and particulate when working ...

Air flow: 100 m³/h - 19,000 m³/h

Centrifugal fans with forward curved blades in galvanised sheet metal Extraction of air which is clean or with a low volume of particulates, exhaust gases, welding fumes, etc. - Structure: The structure ...

Centrifugal fan with forward curved blades in galvanised sheet metal Extraction of air with a low volumes of particulate, exhaust gases, welding fumes, etc. - Structure: The structure of the extraction ...

Air flow: 1,520 m³/h - 52,255 m³/h
Rotational speed: 455 rpm - 2,940 rpm
Noise level: 31 dB - 82 dB

400 ºC/2h and 300 ºC/2h axial exhaust fan units with built-in acoustic attenuator Extraction units with axial fans to work immersed in fire risk areas. Fan: • ...

Air flow: 7,040 m³/h - 47,780 m³/h
Rotational speed: 945 rpm - 2,840 rpm
Noise level: 51 dB - 70 dB

Dynamic wall mounted extractor fans with motorised hatch, for smoke exhaust in case of fires, 400 °C/2h and 300 °C/2h Dynamic wall extractor fans with motorised opening ...

Air flow: 3,000, 3,500, 3,880, 4,420, 4,500 m³/h
Rotational speed: 2,770, 2,710, 2,820, 2,850, 2,800 rpm

... efficiency centrifugal fans (Plug Fan type) indicated for air treatment applications. ATEX 2G or 2D certification with flameproof Ex db, increased safety Ex eb or dust ignition proof Ex tb motor to work ...

Air flow: 147.5 m³/h - 925 m³/h
Rotational speed: 2,760 rpm - 2,910 rpm

Centrifugal fan with forward curved blades or open blades for low flow rates and medium and high heads. Suitable for exhaust gas, flue gas and granular material suction. Direct-coupled execution only. Maximum air temperature: ...

Ducted helical fan with nylon-glass impeller and alternatively cast aluminum impeller. Suitable for moving large volumes of air at low pressure even in the presence of dust or fumes. Maximum air temperature: 60°C. Special ...

The ET extraction tower is normally used to draw in large volumes of air with low pressures. Its small size and light weight facilitate installation directly on roofs, either free suction or connected ...

Air flow: 250 m³/h - 3,000 m³/h

Centrifugal exhaust-fans are intended particularly for source - capture and are completely adaptable to the EP Series arm line or with the EG and EK arm series by utilizing an adapter flange. These fans ...

Air flow: 250 m³/h - 3,000 m³/h

The J series of exhaust fans is especially engineered for use in ATEX categorized zones. The fans are manufactured in diverse versions, each optimized for use in zones with dust-prone environs or dust ...

Air flow: 100 m³/h - 13,000 m³/h

Metal sheet steel fan complete with inlet and outlet flanges

Air flow: 13,600 m³/h - 72,400 m³/h
Diameter: 660 mm - 1,752 mm
Noise level: 65 dB - 74 dB

... - Air extraction in overheated environments (electrical substations, server rooms, etc.) - Forced ventilation in combination with evaporative cooling - Ventilation in confined or closed environments Technical features ...

Air flow: 9,600 m³/h - 52,500 m³/h
Diameter: 638 mm - 1,385 mm
Rotational speed: 393 rpm - 942 rpm

K air extractors are available in several versions, with diameters ranging from 26" to 56", direct-drive, belt-driven or cone-driven. Noise levels are low and efficiency is high. The body is available in galvanized or ...

Air flow: 165, 2,500, 3,000, 3,500, 4,000 m³/h
Diameter: 160 mm
Noise level: 72, 70, 74, 75 dB

The mobile exhaust fan convinces by the very flexible application due to its low construction and the low weight. In connection to a suction hose, the exhaust fan is appropriate to the ...

Air flow: 120 m³/h
Diameter: 100 mm
Noise level: 32 dB

... on db(A) but also on the psychoacoustic analysis to ensure the fan’s sound quality. Pleasant to the ears creating a more agreeable environment. Exceptionally High Air Flow! Superior Fan Blade Design! 120 ...

Air flow: 254, 180 m³/h
Diameter: 100 mm
Noise level: 37, 40 dB

Leading the Ventilation Fan Industry by Continuously Innovating The TUMÄ Eco Ventilation product series features an new beautiful ventilation aesthetic. Today’s new generation home products have morphed into sophisticated ...

Air flow: 120 m³/h
Diameter: 100 mm
Noise level: 29 dB

... on db(A) but also on the psychoacoustic analysis to ensure the fan’s sound quality. Pleasant to the ears creating a more agreeable environment. Exceptionally High Air Flow! Superior Fan Blade Design! 120 ...