|
|
The OilPak is a compact, self-contained oil filtering system designed for ease of operation and service. High cleaning efficiency permits recirculation of plant air, reducing heating and air conditioning operating costs.
During operation, liquid mist and smoke is pulled through a high efficiency pre-filter pad, then collected inside the filter cartridge pockets. Collected liquid drains back to the machine or to the inlet plenum. The OilPak collector maintains a constant efficiency over the life of the cartridge.
The OilPak is available in four arrangements for direct coupling or remote mounting with or without using a central exhaust fan. The arrangements are made from two part options: a fan(s) - motor section and/or an inlet plenum.
|
|
Compact machine-mountable mist collectors dedicated for use on combined machine operations.
■ Three stage filtration for high filtration efficiency and optimum filter life.
■ Handles mist, smoke, and particulate applications up to 1200 cfm.
■ Standard Minihelic® gauge indicates when filter maintenance is required.
■ Hinged access doors makes filter changeout easy and simple.
■ Productivity increases and morale improves by providing a cleaner working environment.
■ Helps to meet OSHA Clean Air Standards.
■ Optional HEPA filter is available on all models.
|
|
|
|
|
|
Low-Maintenance Collection for Oil and Water-Based Coolant Mists & Smoke
The Filter 1 Mistron Mist Collector is designed to eliminate in-plant moisturization through efficient filtration of oil and water-based coolant mists and smoke.
Contaminated air enters the intake plenum and the inlet baffle diffuses the air to distribute it evenly over the impinger surface. The impinger removes large particles and mist, and is self-draining. (An optional high density metal mesh washable prefilter is also available for wet grinding applications.) The unit utilizes a high efficiency micro glass filter for collecting micron and submicron particles. The Filter 1 Mistron offers up to ten times more actual square footage of filter material than centrifugal air cleaning units.
Quiet, energy efficient, and low maintenance operation is provided by a direct drive, backward inclined air foil type blower, requiring no belts to change or bearings to grease. With the vertical oil mist design the primary filter bag pockets are suspended in the vertical position for optimal drainage of the collected coolant mist. For average machine shop operations the primary filter should last one year.
Features
- 95% ASHRAE Primary Filter
- 3 Phase TEFC Motor on Rubber Mounts
- Sloped Drain Pan with 1/2" NPT Connection for Easy Removal or Recirculation of Coolant Air or Other Mists
- Hinged, Gasketed Access Doors for Easy Filter Replacement
- Chevron Impinger
Options
- Washable Metal Mesh Prefilter for Grinding Applications
- Odor Control Disposable or Refillable After Filter
- ASHRAE or HEPA Safty Filter with Visible or Audible Alarms
- Blower Silencer
|
|
A modular design oilmist filter system where it’s flexibility allows for expanding and adapting to changes in machine tool processes.
Mix and match flexibility to tailor-make your system depending on application criteria.
|
|
Absolents oil mist filter ODF is well suited for use in applications such as:
• Grinding (cutting fluid emulsion)
• Turning (cutting fluid emulsion)
• Milling (cutting fluid emulsion)
• Electrical discharge machining
• Machining, using straight oil and moderate loads
|
|
Mist Collectors
The Airflow Systems series of MistPak® mist collectors, with the MistPlus® Contaminant Management System, introduces proprietary barrier-type media into the air flow path collecting and removing oil mist and dry contaminant without compromising operating efficiency. The full line of Airflow Systems oil mist collectors deliver over 95% filtration efficiency while reducing operating costs, and extending filter life and maintenance cycles.
|
|
AR 1415 Series
POLLUTANTS: OIL MIST AND MICROMIST - DUST/MICRODUST - SMOKE
AIRFLOW RATE: 2600 ÷ 4500 m3/h
Suitable for suction and purification of oil mist and dust produced during damp and dry machining processes.
Designed to ensure a highly safe working environment (Laser Machines, Aluminium and Magnesium dust). They are appropriate for purifying particles of different granulometry, simply using interchangeable filters with different degrees of filtration efficiency.
This series is equipped with a High Efficiency HEPA Filter suitable for the removal of microdust, micromist and smoke.
This unit can be connected to more than one machine tool simultaneously, depending on the airflow rate of each machine.
|
|
RECOJET® -1*
The complete solution, plug-in ready to operate. Patented Oil Mist Separation System for all types of machining centers.
- Up to four filter stages
- Dynamically balanced high performance blower
- Flame barrier for fire protection
- Built in sound attenuator
- Light weight construction and compact design
- Maintenance free X-Zyclon®* filter system
- Proven separation efficiency
- Dynamically & statically balanced filter unit
- Optional Ventury Pipe attachment
|
|
|
Oil mist and emulsion mist occured in many working processes. This is a health hazard for the employees. The new Reven Cleaners use several filtration stages and separation performances up to 99,9995% can achieved down to particle size of 0,1 micrometer.
|
|
Our OENA-D series oil mist separators are used in cutting and shaping metalworking processes for scrubbing non water-soluble cutting fluid aerosols based on mineral, organic and synthetic oils. Reusable plastic mesh filter elements and fine-fiber material provide high-efficiency filtration of cooling lubricant aerosols. Our product lineup includes a graduated series of systems with air volumes up to 20,000 m³/h, which can be customized to even larger airflows due to their modular design.
Filter elements
Reusable plastic mesh filter elements and fine-fiber material.
Disposal
The separated oil is collected in the floor basin of the unit and is then reintroduced into the oil supply cycle of the machine via a return pipe, or removed for reconditioning. The return pipe must be vacuum sealed either by using a siphon or by immersing it in the coolant sump by at least 300 millimeters.
|
|
|
Complete modular duct separator unit suitable for installation into a horizontal duct line. The unit is incorporated in a completely welded, steel sheet housing with a lacquer finish in RAL 5002. The service door is fitted with clip fasteners. The housing is stable and torsion-free and has smooth internal surfaces. The bottom part is designed as an oil- and waterproof collection pan. The housing is fitted with patented RXZ basic elements, which are arranged in two stages perpendicular to the airflow direction inside the duct separator module. The collecting pan is fitted with a drain socket, a level indicator and a one-inch socket for the connection of an on-site drain line with a siphon. The duct junctions are not included in the scope of delivery.
|
|
|
The Smog-Hog SG Series mist collector captures high-volume coolant mist and oil smoke from industrial processes including drilling, grinding, screw machining and others. Depending on your requirements, systems can be ducted, unducted or free hanging inside any facility.
|
|
The DELTOLE® is an oil mist collection unit which purifies and cleans the air in working areas, decreases fire risk hazards and operator accidents and increases productivity. It is especially recommended for all metal processing applications.
OPERATING PRINCIPLE
The DELTOLE® uses 4 fundamental principles to trap oil particles :
- The oil mist is separared by the fan impellor or by a cyclonic system which allows the majority of oil particles to coalesce.
- The inertia force ensures that the droplets formed in this way are retained and then migrate to the collection tank through a wire knit filter.
- The diffusion forces with “Brownian” motion deal with the very fine particles by means of a high efficiency filter used as an option instead and in place of the last standard final filter.
- For use without recycling, a multi-layer wire knit filter can be substituted for the final filters. The oil collected by the filter is continuously evacuated by means of a siphon.
|
|
General description
Impurities in the air are produced from oil and emulsion vapors in machining areas by machine tools, at soldering and welding tables and at non-enclosed machines during machining. These impurities can be harmful to the health of the employees in these areas and can also have a negative effect on the quality of your products.
HOFFMANN mist collectors are your answer to these air pollution problems.
HOFFMANN mist collectors are high-quality devices that stand out due to their long service life and low maintenance requirements. Our systems are in line with the state of the art and have proven themselves in many years of use.
|
|
| ... products without technical information |
| |
Seifert has relied on consequent engineering for the four actual EMC filter fan models which have a lot to offer: suppression of up to 100dB thanks to a metallized EMC grid, a high protecting rating of IP55 & an assembly frame for easy mounting. A special feature of the largest model is the use of 4 separate economical fans for more air volume & less noise.
suppression of80...100 dB (up to 300 MHz)
air volume 21...300 m³/h EMV (Standart up to 550 m³/h)
complete sealing frame
reversable design cover
suitable outlet filter
quick press-in mounting
|
|
... see all the products in the category
Axial fans
|
Combined magnetic separation solutions
Application: automatic separation/recovery of ferrous and non-ferrous materials.
Main features:
- Custom-designed and manufactured separation solutions for specific applications, combining conveying, vibratory, screening, magnetic separation and metal detection equipment;
- Single operating console for complete control over the whole system;
(!) For conducting laboratory tests with your material please contact our sales department.
(!) Please attach a completed questionnaire to quotation requests.
|
|
- Industry's only Inline, Auto-purging design
- PATENTED design & unique flow path provide coolant quality to 5 microns
- Most powerful (9,000 gauss) rare earth magnets provide 70-80% greater removal efficiency than ceramic drum separators
- Excellent pre-filter for cast iron machining
- No mechanical scrapers or moving parts that need routine maintenance
- Available as standalone units or integrated into your CoolJet system.
|
|
Combined magnetic separation solutions
Application: automatic separation/recovery of ferrous and non-ferrous materials.
Main features:
- Custom-designed and manufactured separation solutions for specific applications, combining conveying, vibratory, screening, magnetic separation and metal detection equipment;
- Single operating console for complete control over the whole system;
(!) For conducting laboratory tests with your material please contact our sales department.
(!) Please attach a completed questionnaire to quotation requests.
|
|
|
|
|
|
Hexagon Filter Cleaning System
General:
This ultrasonic cleaning system is designed to clean stainless steel filter elements. The system utilizes water and detergent in the ultrasonic cleaning tank. Parts are manually transported through the wash process.
System Layout:
The system is designed with a stainless steel exterior frame with all stainless steel tanks and a stainless steel countertop. The ultrasonic generators are mounted within the frame cabinet. The countertop is fitted with a drip ring around each tank opening to reduce run-off effects. System is built to provide a degree of protection against light overspray and splashing water.
Dimensions:
Overall console dimensions: approximately 22" x 28" with a counter top height of 42 3/4".
Equipped as follows:
Ultrasonic Cleaning Tank (each tank):
- Tank dimensions: Octagonal shaped, 10" across x 38" deep (14 gallons)
- Working dimensions: 10" across x 28" liquid depth
- Fabricated from 12 gauge, 316L stainless steel
- 1000 Watts, 40kHz transducers
- 1000 Watts Average power, 2,000 Watts peak power
- 1000 Watt Ultrasonic generator with Radio Frequency Interference (RFI) filter
- 1" drain with 1/4 turn brass ball valve
- 1000 Watts of thermostatically controlled heat
- Sound dampening insulation: typically reduces noise by 5 to 10 decibels
|
|
| ... products without technical information |
| |
|
|
