|
|
Gemini represents the perfect solution for all cases where the customer in little spaces has the need of both a pre and post-filtration.
Thanks to the compact shape, Gemini adaptes very easely to all type of machine tools.
Gemini is supplied with a prefiltration stage and another filter with specific efficiency depending on the needs of the customer (>95% or >99,95% - Norms CEN EN 179/1822).
GEMINI has a particular design, already patented, which makes maintenance operations and filters replacement very easy.
Gemini is really customizable in fact it is possible to have different combinations of filters depending on the desired efficiencies and maintenance intervals even after the first installation.
|
|
Oil mist and fume Mini-Max filter, capacity 1.500-7.000 m3/h.
The new Mini-Max series filters are studied to be located in proximity of tooling machines or in proximity of hot metal stamping presses with eventual cetralized solutions. Mini-Max filters are composed by a pre-filtration section, by a very high efficiency filtration section for oil mist and fume and by possible further stages for absolute filtration (H13).
Basically the privilege of SO.TEC coalescence filters is the long operating time, continue high filtration efficiency, without any maintenance requirements. On suction from tooling and machining operations, with oil or water-based lubricant, we can also guarantee more than 5 years’ operating time for the coalescence filtration section.
|
|
Oil mist and fume Mini-Max filter, capacity 500-1.500 m3/h.
The new Mini-Max series filters are studied to be located in proximity of tooling machines. Mini-Max filters are composed by a pre-filtration section, by a very high efficiency filtration section for oil mist and fume and by possible further stages for absolute filtration (H13).
Basically the privilege of SO.TEC coalescence filters is the long operating time, continue high filtration efficiency, without any maintenance requirements. On suction from tooling and machining operations, with oil or water-based lubricant, we can also guarantee more than 5 years’ operating time for the coalescence filtration section.
|
|
|
|
|
|
Oil mist and fume "compact" filter for centralized plants, capacity 6.000-30.000 m3/h.
SO.TEC "compact" plants are studied to have a little size and a very high separation efficiency.
The filtering process consists of two stages:
• In the former stage graphite and oil particles bigger than 1 micron, as well as any other impurities, are separated from the air flow;
• In the latter stage such submicrone oil particles, making up 90% of total oil present in suction air, are separated by coalescence according to an efficiency factor as per table below:
- 99,9 % efficiency for bigger than 1 micron particles
- 99 % efficiency for bigger than 0,5 micron particles
- 95 % efficiency for bigger than 0,2 micron particles
(high efficiency achieved thanks to the special Microless® filtering elements).
Our well-established know-how and the reliability of our plants enable us to meet our Customers’ needs for extremely low emissions:
- in case of separation of oil mist from hot brass stamping process we guarantee
- in case of filtering of oil mist from machine tool machining, we guarantee an emission oil content lower than 2 mg/Nm3 (expected value lower than 1 mg/Nm3).
|
|
|
|
|
|
Oil mist and fume "supercompact" filter for centralized plants, capacity 20.000-180.000 m3/h.
SO.TEC "supercompact" plants, thanks to the optimum use of the space inside the filter and to the acces doors placed on both sides, are able to garantee high flows capacity with reduced obstruction, maintaining an high separation efficiency.
The filtering process consists of two stages:
• In the former stage graphite and oil particles bigger than 1 micron, as well as any other impurities, are separated from the air flow;
• In the latter stage such submicrone oil particles, making up 90% of total oil present in suction air, are separated by coalescence according to an efficiency factor as per table below:
- 99,9 % efficiency for bigger than 1 micron particles
- 99 % efficiency for bigger than 0,5 micron particles
- 95 % efficiency for bigger than 0,2 micron particles
(high efficiency achieved thanks to the special Microless® filtering elements).
Our well-established know-how and the reliability of our plants enable us to meet our Customers’ needs for extremely low emissions:
- in case of separation of oil mist from hot brass stamping process we guarantee
- in case of filtering of oil mist from machine tool machining, we guarantee an emission oil content lower than 2 mg/Nm3 (expected value lower than 1 mg/Nm3).
|
|
ECO-WORKCABIN Drawing 1620
Equipped with a PRE-FILTRATION SYSTEM FOR SWARF
It allows the highest degree of cleanliness of the working environment.
Its ergonomic design and the protective screen made of transparent Lexan are essential elements to safeguard the machine operator.
An easily removable swarf collector prevents the diffusion of the removed particles in the working environment and on the clean workpieces.
The cabin is pre-arranged to be equipped on board with an air cleaner for suction and purification of oil mist produced during the process of polishing. As an alternative, oil mist could be removed by the air cleaner installed on the machine tool.
The support trailer can be supplied either with wheels made of rubber or with feet.
The unit can be made soundproof to reduce noise pollution.
In the picture: ECO-WORKCABIN equipped with an ECO air cleaner.
|
|
ARF Series
POLLUTANTS : MICRODUST – SMOKE – FUMES - ODOURS
AIRFLOW RATE : 750 m3/h
Suitable for suction and purification of microdust and smoke produced during damp and dry machining processes.
The perfect solution for Laser Machines and Machines for Spark Erosion.
The suctioned air first passes through a sequence of metallic and synthetic filters, which retain the particles with higher granulometry.
Subsequently, the air goes through an Absolute HEPA Filter H13 - tested in accordance with Euro Norms EN 1822 - and is emitted perfectly purified in the environment.
The FA version is equipped with an ACTIVED CARBON cell to eliminate fumes and odours.
|
|
ECO Series
POLLUTANTS: OIL MIST - MICRODUST - SMOKE
AIRFLOW RATE: 500 ÷ 750 m3/h
A quality, reasonably sized solution. Suitable for suction and purification of oil mist, microdust and smoke produced during damp and dry machining processes.
The unit is equipped with a drainage for the recovery of recondensed coolant liquid.
|
|
ARNO Series
DESIGNED FOR HIGH-DUTY PRODUCTION MACHINE TOOLS
WORKING ON 3 SHIFTS
guarantee of:
- constructive solidity of its mechanical parts
- 5 filter stages, which can be diversified according to the type of pollutant and kind of machining process
- residual concentration of pollutant in the air at unit exhaust < 0,1 mg/m3
POLLUTANTS: OIL MIST- SMOKE- MICRODUST
AIRFLOW RATE: 1000 ÷ 4000 m3/h
SUITABILITY: ALL TYPES OF MACHINE TOOLS
MACHINING CENTRES - LATHES - GRINDING MACHINES- LASER MACHINES - BORING MACHINES - MILLING MACHINES - THREADING MACHINES – SHARPENING MACHINES - MACHINES FOR SPARK EROSION - COLD HEADING MACHINES - ETC...
|
|
Centrifugal filter for oil mist CLEANMIST® Filter body, divided into two parts, eases service operations; the inlet is provided with a mesh to avoid aspiration of solid materials and a conic diffuser for uniforming distribution of fogs within the wheel. Fog and vapour particles are centrifuged at high speed inside the wheel and, crossing the filtering panels, undergo a coalescence effect becoming small drops which, joined in a pressure flow, are discharged with the specific drainage.
Cleaned air is discharged in the environment, passing through the upper part of the filter.
|
|
UNIFIL air cleaners stand out for easy installation, easy operation and easy maintenance. Thanks to the well-devised design and the utilization of high quality filter elements, the units achieve long operating times and a collection efficiency of 99.997% for particles >0.3µm
- Modular design:
In case of changing an application, UNIFIL can be adapted any time in a budget-saving way (e.g. further pre-filter plates or gas sorption stages can be connected for the elimination of odours %u2013 in modular design!)
- Flow optimized fans in special collocation:
Optimum inflow into the main filter and use of the entire surface. Replacement of the main filter is only necessary if full load has been achieved, energy consumption is extremely low.
- Easy maintenance:
UNIFIL applies slide-in units for standardized filter elements. This makes maintenance easy and a replacement is done in few minutes
|
|
| ... products without technical information |
| |
|
|
see the results for the following category :