|
|
| The “FPF” series fan filters are widely recognised for their thin external profile, fashionable design, snap-mounting system and high performance. All models are Nema 12 and IP54 standard rated but, on request, alternatively available in Nema 3R and IP55 and also in EMC-shielded version. |
|
-High through-flow air volume
-Functional design
-Time-saving installation
Filter fans are used to provide an optimum climate in enclosures.
The interior temperature of an enclosure can be reduced by channelling cooler filtered outside air into the enclosure thus expelling heated internal air.
The resulting air flow prevents formation of localised hot pockets and protects the electronic components from overheating.
The plastic usedfor the hood of this filter fan series is highly weather proof and UV light resistant.
Approvals: UL File Nr. E 234324 |
|
-High through-flow air volume
-Functional design
-Time-saving installation
Filter fans are used to provide an optimum climate in enclosures.
The interior temperature of an enclosure can be reduced by channelling cooler filtered outside air into the enclosure thus expelling heated internal air.
The resulting air flow prevents formation of localised hot pockets and protects the electronic components from overheating. The high-performance axial fan provides high air circulation.
The plastic usedfor the hood of this filter fan series is highly weather proof and UV light resistant.
Approvals: UL File Nr. E 234324 |
|
-Very low noise
-Minimal depth in enclosure
-Functional design
-Time-saving installation
Filter fans are used to provide an optimum climate in enclosures.
The interior temperature of an enclosure can be reduced by channelling cooler filtered outside air into the enclosure thus expelling heated internal air.
The resulting air flow prevents formation of localised hot pockets and protects the electronic components from overheating.
The plastic usedfor the hood of this filter fan series is highly weather proof and UV light resistant.
Approvals: UL File Nr. E 234324 |
|
COMMON FEATURES
The units allow a simple and cost effective solution for
enclosure cooling.
Designed for easy clip-on mounting and made out of high resistance, self extinguishing ABS UL94VO grade (RAL7035) they cover an air flow rate range from 35 m3/hr to 1100 m3/hr.
They provide an IP54 protection degree.
All the fans are mounted on ball bearings with MTBF of 40000 hours. |
|
Seifert has relied on consequent engineering for the four actual EMC filter fan models which have a lot to offer: suppression of up to 100dB thanks to a metallized EMC grid, a high protecting rating of IP55 & an assembly frame for easy mounting. A special feature of the largest model is the use of 4 separate economical fans for more air volume & less noise.
suppression of80...100 dB (up to 300 MHz)
air volume 21...300 m³/h EMV (Standart up to 550 m³/h)
complete sealing frame
reversable design cover
suitable outlet filter
quick press-in mounting |
|
... see all the products in the category
Axial fans
|
Universal Sorting and Equalizing System
The UES is a product routing system as an extension to an automatic price labeler. It intelligently compiles batches, boxes or bags with a standardized fixed weight from a choice of products with weight tolerances. Therefore, the UES helps to optimize product usage of food, non-food, fresh and frozen products. The import of the product weights through a standardized data interface from a price labeler saves an additional weighing process.
- Reduces/saves up to 75% of give away depending on product
- Comes in standard design with 4, 6, 8, 10 or 12 channels, but also various options for special production environments available
- Different designs and constructions of the channels to fit various product classes
- Special design for instant filling of bags or various containers optional, as well as release to transport -belt or -roll systems
- Integration in robot systems possible
- Packing table for outer cases
- Working with labeled and wrapped or foiled products
- Compact and space-saving design
- Easy-use and intuitive 10,4“ TFT colour display with softkey controls
- Clearly arranged display symbols, easy-to-capture production data
- Detailed statistical information and functions, including breaks and downtimes
- Allows for additional processes like sorting, equalizing, calibrating and counting, also in simultaneous mode
„The investment into an equalizing system made instant product savings possible and had a short-term payback time“ |
|
| ... products without technical information |
| |
Exceptional resistance to heat and cold.
• Almost zero water absorption (max. 1%).
• Good resistance to settling.
• Soft and resilient.
• Resistant to ozone and UV light.
• Resistant to ageing.
• Manufactured from black EPDM cellular rubber |
|
Stuffing Box Packings (Gland Packings) are machine-braided cords of different materials, used for sealing rotating shafts in pumps, ventilators and fittings. Packing sections are laid round the shaft in circles and then compressed with the gland. For dynamic applications, the compression must be so adjusted that a certain minor amount of leakage between packing and shaft may emerge. Harmful dry running is prevented thus and the leakage is dissipated or returned. Various materials and material combinations are used according to the individual case of application. Special lubricants are incorporated into the braiding to improve running properties.
|
|
9000 EVSP Simplified™
Excellent sealing
* Patented "cup & cone" design permits selective component compression and controlled radial flow for effective sealing on I.D. and O.D.
* End rings act as wiper rings to restrict graphite particle transfer, prevent extrusion and provide extra resiliency
Custom design capability
* Patented cup & cone design can provide sealability in valves as shallow as three-ring cross sections
* For deep stuffing boxes requiring more than a 7-ring set, machined / split carbon bushings can shorten the box depth
Grade 250 (Style #4525) for general services
Grade 580 (Style #4540) for nuclear services
* Choice of end rings: Style 98 (general service) or Styles G-700 or 1398 (nuclear service) |
|
| ... products without technical information |
| |
Misumi is the NO 1 supplier of over 500,000 standard and customised components for Mechanical Factory Automation/Special Purpose Machinery, Press Dies and Plastic Mould. We delivery components europewide in averagely 6 – 8 days GUARANTEED DELIVERY from the day of purchase, stock items available from 2 days delivery.
Misumi components are different in that they can be configured to your need using our unique part coding system. Dimensions, materials and special machined requests can all be selected within the misumi system enabling engineers and designers to achieve a configured parts as standard with no extra machine costs. Standard items are also available via the catalogues.
All components can be designed using the Misumi CAD portal . Compatible with industry wide packages a designer can configure our parts at the touch of a button in up to 0.01mm, and download in seconds saving valuable design time, registration required.
To receive our extensive catalogue and save valuable time and money, visit our website or request yours today by clicking the request banner.
MISUMI – Precisely what you need. |
|
SNC pillow block range: a pillow block unit, a Premier bearing = a perfect combination!
A new generation of pillow block units has been developed by SNR. It is the result of 20 years of application know how for bearing housings.
The additional benefits include:
• Excellent housing stiffness,
• Better heat dissipation due to intelligent housing geometry and use of regulation disc,
• Simplification of the assembly process.
The wide range of bearings and sealing solutions (double lip seal, V-ring seal, taconite seal, labyrinth seal…), with shaft diameters ranging from 20 to 160 mm plus the interchangeability with other market products, SNR offers you a wide choice of application needs.
Combined with our SNR Premier spherical roller bearing range, SNR pillow block units offer a complete range of performance requirements.
Try them!
|
|
FAG housing and bearing units have successfully been used in machinery, installations and equipment.
FAG bearing housings are usually made of greycast iron.
As a rule, the bearing seats in the housings are machined in such a way that the bearings can be
displaced, i.e. they are of the floating type. All outer surfaces of FAG housings and housing parts are provided with a universal coat of paint (colour RAL 7031, bluish grey).
Depending on the operating conditions, the bearing housings can be sealed with rubbing seals, non-rubbing seals, and combinations of both. |
|
Radial insert ball bearings are single row, rady-to-fit units comprising a solid outer ring, an inner ring extended on one or both sides, cages made from plastic or sheet steel and P, R, L or T seals. Bearings with an inner ring extended on both sides undergo less tilting of the inner ring and therefore run more smoothly.
The outer ring has a crowned or cylindrical outside surface. In conjunction with an INA housing matched to the bearing type, bearings with a crowned outside surface compensate for shaft misalignments; see Compensation of misalignments.
They are located on the shaft by means of an eccentric locking collar, grub screws in the inner ring, an adapter sleeve, drive slot or fit. Radial insert ball bearings are particularly easy to fit, suitable for drawn shafts of grade h6 to h9 and, with a few exceptions, can be relubricated.
Some series with an eccentric locking collar and with grub screws in the inner ring are also available with an inch size bore.
|
|
* Ij3000 XLS Controller :
The Ij3000 XLS Controller was designed and built to meet any demanding coding application. Diagraph has engineered the XLS Controller to exceed performance expectations. The XLS Controller seamlessly integrates Impulse Jet and Integrated Valve technology offering a networking function that delivers reliable, high quality printing to any automated production enviroment.
* Ij3000 ES Controller :
The Ij3000 ES Controller is a powerful, low-cost web-server based HMI features a color touchscreen display, drives Diagraph’s Integrated Valve or Impulse Jet printheads, and has a 100-base T Ethernet network port for web browser, network connectivity. Diagraph has created special package “Ij3000 ES kits” for dual head Integrated Valve 9 or 18 dot printhead applications and has special introductory offer. Interested parties should call 800-722-1125 for details.
* NEW! IV-18 Dot Printhead for IJ3000 Ink Jet System
Diagraph is pleased to introduce the IV18-Dot Printhead for the Ij3000 Integrated Valve Large Character Ink Jet System. Key Standard Features Include: Two-piece, die-cast aluminum housing, environmentally sealed printhead for harsh environments, robust metal housing over entire printhead, built-in LED display and membrane switch for: -->channel purge (one or all channels) -->electronic pulse width (dot size) adjustment -->pressure gauge, automatic first dot correction, overdrive protection, photocell mounting bracket holes, backwards compatibility with existing Ij3000 and Series 1 printheads. The IV-18 Dot Printhead is driven by Diagraph’s Ij3000 Ink Jet Printing System. |
|
Unit designed and produced by United Barcode Systems as a real time labels Print & Apply System for two side corner box. Perfect for labelling corner solutions.
Solid system made for industrial environments. Its base height is regulating in order to adapt all kind of production and packaging lines and uses synchronisation and alarm signals.
Its working speeddepends on label size reaching up to 45 labels/minute.The APL-2000 can be connected to any computer system;Windows NT, UNIX, AS/400, PC, etc... and ERP environments. |
|
Real time labels Print & Apply System for labelling dynamic processes. It has been developed to satisfy awide range of labelling needs in boxes, packs, sets and sacks.Easily adapts when various fields label printing and applicationis needed in half speed situations.
The print and apply kit can be adjusted for perfect applicationsin any direction and position: Top and Sides. Application distance depends on production line characteristics and application placeas well as on the type of pack to be labelled. Its working speeddepends on label size reaching up to 45 labels/minute. |
|
Videojet P3400 Label Printer Applicator
The Videojet P3400 label printer applicator is easy to use and maintain, and features the versatility of modular spares to deliver maximum uptime and performance. Available with multiple printer options and a variety of application choices, the Videojet P3400 provides a customizable, off the shelf solution.
Simple, modular design
RFID Enabled
High quality thermal transfer printing
Built to last in the most rugged industrial environments
User configured beacon and status output
Multiple label configuration menu
Flight time compensation for automatic label placement control
Ethernet connectivity for set-up and control
*THIS ITEM IS CURRENTLY AVAILABLE ONLY IN NORTH AMERICA |
|
| The new STERIDIUM range of drying cabinets has been engineered using the finest quality stainless steel, and is ideal for many different functions across a variety of industries; including anaesthetic tube drying, glassware drying, instrument drying and soil dehydration. |
|
Drying locker for professional clothes. Closing by handle 1/4 of turn. To pose on the ground on feet jacks. Multiple punching of the lower part of the cell. Capacity from 2 to 3 complete equipments of work. Different specific models
230 V - 1100 Watts |
|
Cupboard of drying out of stainless steel.
Manual or automatic Démarage.
Drying with hot air, system of recycling of the air. Programming of the startup and the stopping of the apparatus.
Allows the drying of a multitude of materials such as for example of the masks respiratoirs, the shoes, the gnats...
Cleansing by ozone generator.
Capacity from 30 to 70 pairs.
Conso 2000 to 3200 W in 230 V 50 Hz -
Drying cupboard
Also exist in version epoxy painting
|
|
|
|
see the results for the following category
