|
|
|
The range presented in this chapter consists of axial fans (VRE), with grill (VGR) or basket grill (VPR), round (VGV) or square (VGC) rings, and threephase motor (VREt, VGRt, VPRt, VGVt, VGCt). In response to your specific needs, the air flow, power, rotational speeds (multispeed by windings or by controllers), noise level, overall dimensions and finish... of the fans can be specifically defined according to your requirements.
|
|
The series of SEPA® HYB... fans are designed for active cooling in flat systems. The radial fans are equipped with ball-bearings and metal- or plastic-housing.
Despite of compact design the fans are providing high air flow. As usual for all SEPA products, superior reliability because of 100% burn-in.
SEPA Europe GmbH provides 7 different sizes from 35x35x5 mm up to 65x65x12,3 mm. Standard supply-voltage is 5VDC, optional it is possible to get an alarm-output or a special connector.
|
|
The standard axial product range of SEPA® contains fans from 15x15 mm up to 60x60 mm. Furthermore on request, we can deliver fans with dimensions up to 150 mm. All SEPA® fans are subject to a strict process inspection with a following 12h burn-in. After this burn-in the final inspection is the last step before packaging. This procedure ensures that early failures hardly ever appear.
|
|
|
The range presented in this chapter consists of axial fans (VRE), with grill (VGR) or basket grill (VPR), round (VGV) or square (VGC) rings, and threephase motor (VREt, VGRt, VPRt, VGVt, VGCt). In response to your specific needs, the air flow, power, rotational speeds (multispeed by windings or by controllers), noise level, overall dimensions and finish... of the fans can be specifically defined according to your requirements.
|
|
|
Beside the SEPA Kleinstlüftern we offer starting from 60x60 mm of exhausts of the mark Costech. Here both DC and AC exhaust are available.
|
|
|
Fan motors rotate fans to cool the inside of PCs and other office automation (OA) equipment by directing heat outside. Minebea Motor Manufacturing Corporation manufactures high-end fan motors with Minebea ball bearings, and fan motors with long-life sleeve bearings.
|
|
A broad range of standard and custom designed models of axial and centrifugal frame fans, driven by AC shaded pole or capacitor motor or alternatively with a brushless DC motor, included a full line of accessories.
Special solutions are available for applications in specific ambient conditions: IP25 and IP55 fans, high temperature resistant fans and all metal fans.
|
|
San Ace
These fans are used extensively in computer equipment from PCs to Internet data centers.
AC Fans
DC Fans
Blower Fans
STANDARD FAN
Our fan motors use double ball bearings for stability and are available in 13 different product sizes, ranging from 36 mm square type to 200 mm round.
|
|
The cooling of electronic application plays an important role in its smooth operation. Richco has a wide variety of mounting, protection, vibration dampening and filtration products.
Our fan accessories range offers a simple solution to the protection of mounted fans and prevents dust ingress. Our products also offer protection to the user from accidental damage and bodily harm. The TPE fan mounts play an important role in mounting the fan unit securely and also suppresses unwanted noise generated by the fan itself.
In order to dissipate static build from airflow mowing through the intake, we offer a metal grounding finger which can be connected to a grounding cable to protect the fan from unwanted EMI and RFI.
Typical applications include office equipment, computers, consumer electronics such as plasma/LCD flat screens, set top boxes, telecommunication and general electronic markets.
|
|
SEPA EUROPE GmbH provides a manifold range of accessories for fans.
Besides to a standard choice of of finger-guards, we can provide also dust-protection-filter with or without EMV-filter.
Specific high-grade EMV-filter are on stock for many fan dimensions.
For CPU-coolers we provide two dimensions of thermal-pads. These self adhesive heat conducting foils are the approved methode to fix CPU-coolers.
For monitoring and controlling of DC-fans we can provide external alarm elctronics as well as temperature elctronics.
New in our delivery program is a special antivibration mounting-sleeve for fans of 40 mm upwards. Advantage of these sleeves are fast, simple and stable screwless assembly and disassembly of fans. Probably the most important issue is, that it eliminates the transmission of oscillation and vibration from the fan to the housing.
|
|
The 1990 founded company SEPA EUROPE GmbH is supplier for fans and accessories. One main focus of the company based in Freiburg is to support our customers during the disign-in process.
Product-range:
DC-fans
AC-fans
finger guards (plastic & metal)
dust-protection-filter (with/without EMV-filter)
EMV-filter
alarm-electronics
external temperature control
vibration-isolating mountings
|
|
SPLASH PROOF FAN
Our waterproof fan was developed with the goal of being used outdoors over long periods of time.
We now achieve expected lifetimes of 100,000 hours.
Waterproof properties are available on IP55 for W-type and IP54 for
WS-type products.
|
|
|
The broad range of SANYO DENKI fans has high reliability, low noise and affordable price. A wide range of AC and DC models allow the customer to chose the component that best fit every application. The new A series fans, optimized for cost-sensitive applications, make possible to use an high quality fan where before was impossible. LONG LIFE series fans, developed for applications whose maintenance is difficult or impossible, exceeds 100.000 hours of continuous rotation at 60°C.
|
|
|
Globe Motors offers a complete line of Commercial Cooling Fan sizes and accessories. All fans have ball bearings for maximum life and quiet performance.
|
|
Selecting between DC Fans and AC Fans:
First, consider whether you want DC fans or AC fans. In the past, the higher cost of DC fans led to the almost exclusive use of AC fans. Now that this price differential has disappeared, the many advantages of DC fans make them the best choice. One advantage of DC fans is longer life. Another is almost 60% less power consumption than AC fans. According to industry experts, a 10°C increase in fan temperature can reduce its life by as much as 20,000 hours.
Another selection factor is that the speed of DC fans is directly proportional to voltage, so it can run at the speed required for adequate cooling. However, usually DC fans runs at less than maximum speed, creating less noise, and using less power.
|
|
NMB Technologies Corporation, a pioneer in high volume manufacturing of electro-mechanical components, offers a comprehensive line of cooling
products, including AC & DC axial fans and blowers ranging from 25mm to 172mm in diameter. With over 50 years of market leadership in design and manufacturing of precision ball bearings, the heart of the fan motor, NMB leverages its expertise to develop and produce superior cooling fans and blowers. Because we are a vertically integrated manufacturing powerhouse, we are able to provide impeccable quality and matchless value.
|
|
| ... products without technical information |
| |
Major 2
The Major 2 fan coil unit is designed to be mounted vertically on a wall or horizontally below ceilings to heat and cool homes, businesses and industrial and healthcare facilities. Not only does it combine the economic benefits of installing and operating a central boiler and chiller plant, it also allows individual temperature control in all rooms.
Available in six sizes and two models:
- CH: horizontal cased,
- CV: vertical cased.
Heating capacity: 2 to 20 kW
Cooling capacity: 0.6 to 8 kW
Air flow rates: 115 to 1300 m³/h
- Polymer casing with solid RAL 9010 finish,
- Two access doors lead to air bleed valve and control terminal,
- Water coil: two or four tubes or two tubes and electric heater,
- Condensate drain pan,
- Seven-speed motor (three factory-wired speeds) with balanced, double-inlet aluminium blower wheel,
- Mounting bracket frame,
- Regenerative polyester fibre filter. Efficiency class: G3 (EN 779),
- Fully enclosed electrical junction box,
- A wide selection of control options.
|
|
The gas heater KING is an independent appliance that
can be used as a great and convenient alternative to the
standard boiler house heating. With KING you have the
possibility to programme the temperature you want in
the room you need, with the possibility to programme
the temperature in every single room reaching therefore
and energy saving up to 30-40%. It is made up of an
elegant ivory varnished cover, a cast iron heat exchanger
(with control window for inspection pourposes) that
guarantee a very silent working, of a burner with safety
valve and wall flat fume/air kit that ensure a tight working
of the convectors with respect to the inner environment.
KING convectors can be used in houses, laboratories,
bars, shops, offices, and… wherever you want to
save energy! The working characteristics comply with
the standards UNI- CIG7129 for machines type C, gas
fired.
There is also the CLIMA-KING range with models from
7,2 to 13,3 kW which add to the heating function the airconditioning
function for summer time.
|
|
Thalassa fan convector are reversible heating and air conditioning.
The offered range includes 4 models and 5 sizes, with powers from 5 kW cold production and 11 kW hot production.
Since there is poor residual pressure with this equipment (20 Pa), they are used preferably for direct blowing either hanging or wall mounted, with or without casing.
Easily integrated in any type of premises due to its discrete presentation and RAL 9010 epoxy painted frame.
Aircalo offers a wide scope of flow control customization.
|
|
Description
One piece laminary flow
- Panel facing : 2 GRP (Glass Reinforced Polyester) facings
- Insulation core : PUR or PIR foam (Thickness is defined according mechanical and temperature constraints)
Custom made casing: the answer to your specific dimension needs and shapes !
Hygienic design
- airtight (any thermal bridging)
- corrosion proof
- Internal and external smooth surfaces.
- Insensitivity to chemical products and easy to clean
Applications: Food-processing, Biotechnology, Electronical and microelectronical, Hospitals, Pharmaceutical...
CERTIFICATES
Fire rate
- M1 according to NFP 92-501
Food safe coating: Approval n°9080136 from LNE
|
|
| ... products without technical information |
| |
Since 1968 manufacturer of industrial vacuum cleaners, RIBO praises a well-established experience in plumbing and sanitary fittings industry.
MICROSOF, portable blowing/vacuuming unit, is the result of the steady attention that RIBO pays to the Operators in cleaning and maintenance of wall-type gas boilers.
Its peculiar features make it particularly suitable for cleaning and maintaining operations of:
- Wall-type gas boiler cleaning
- Air conditioning units
- Photocopy machinery
In addition to that it is suitable for professional use to clean equipment like: saws, drills and corers.
MICROSOF is a compact-size, light and easy-to-handle mochine, granting over the time the highest levels of QUALITY, RELIABILITY AND ROBUSTNESS, such as all RIBO industrial vacuum cleaners.
The double use as blowing vacuuming unit, the specific equipment included and the extreme facility in use, as far as the stylish look, the reduced noise level and the filtering efficiency, make MICROSOF the ideal machine for all the operations of cleaning and maintenance at Custromer's home.
Reaffirming the well-established characteristics of quality, reliability and robustness, RIBO gives to this machine 3 YEARS WARRANTY.
|
|
|
|
see the results for the following category
