|
|
A unique hinged design eliminates the need to disassemble the clamp prior to installation and allows the installer to close the pipe clamp with one hand without turning a screw. Once the pipe is installed, simply tighten the screw to secure the pipe in place.
The cleverly designed pipe clamp requires only one screw and hinge. The all steel design of the patented closing mechanism means the strength is not significantly reduced by exposure to heat.
|
|
One-piece, self locking pipe clamp for safe and efficient installation of cables and tubes
- Simple mounting without locking screws
- Fast mounting
- Listed by IAPMO R&T/UPC®
- Approved by KIWA®, UL®
- Halogen free as per IEC-Norm 754-2
- Burning behavior as per UL94 HB
- Clamping range 8 - 127 mm
- Low height
- Different plastic materials possible
Since 1975 the self-locking pipe clamp CLIC has proved itself millions of times. Cables and pipes fixed with «Swiss Quality» are fast and securely fixed throughout the world.
Today, system solutions (pipe clamps, screws, plugs and accessories) are required, for instance in telecommunications. Consulting during the phase of planning, becomes more and more important. A long experience in business and our internal development division have allowed many individual solutions in collaboration with our customers engineers. Our production is able to preassemble tailor-made CLIC systems even at short notice.
CLIC ideally covers the demands for fixing points in sensitive environments. In many tunnels coaxial cables for radio and mobile telephone systems are openly mounted. The performance may not be impaired by interference from metallic parts. The plastic pipe clamp is therefore the best solution for the installation.
|
|
Stop Collars with Rubber Bumpers
The unique Threaded Fine-Adjust version makes stroke adjustment even easier! Simply slide along the shaft and clamp in place. Then rotate the knurled portion for up to 1/4" of fine stroke adjustment. Ordinary stop collars are also available.
Available On:
Dual Slides: 5/8" Bore 1" & 1-1/2" Bore
Single Action Slides: 5/8" Bore 1" & 1-1/2" Bore
Gantry Dual Slides: 1" & 1-1/2" Bore
|
|
PUSH LOCK CABLE CLAMPS AND SNAP LOCK CABLE CLAMPS DESIGNED TO INSTALL WITHOUT DAMAGE AND TANGLES TO SENSITIVE WIRE/CABLE/HOSE BUNDLES
Heyco Products, Inc., a leading ISO 9001:2000 US-based designer and manufacturer of wire protection products and electrical components, is now offering a new line of Push Lock Cable Clamps and Snap Lock Cable Clamps for clamping cable/wire/hose bundles securely in place.
Both clamp types resist corrosion, salt water, weak acids, grease, and common solvents (non UL certified or tested).
|
|
This is the classic product group. You'll still find products here from the early years which are still very popular with the installers and are processed in large quantities to day.
The newer product series of the anchor and C-profile rails with the accompanying clips and yoke clamps have still a high significance in the everyday workflow, too.
|
|
Hose mountings are installed in various kinds of aircrafts in order to settle important junction cables and interposition truns properly.
For detailed technical information please contact the technical department of GMT.
|
|
| ... products without technical information |
| |
DIGICAT 100 Buried Service Locator
The DIGICAT 100 can be used to find live (energised) power cables, trace buried metal services which reradiate signals. The highly visible digital LED display makes a swift service location possible.
DIGICAT 200 Buried Service Locator
In addition to the well proven functions of the DIGICAT 100 the DIGICAT 200 offers a one stop depth estimation. In co-operation
with the DIGITEX 8/33 (operating in the 33kHz mode) the real depth and location of all services can be found. Available in two display formats, offering depth estimation to 3m or 10ft and an accuracy of approx. ± 10%.
DIGICAT 200 GIS Buried Service Locator
The DIGICAT200 GIS offers all the functions of the DIGICAT 200 with additional wireless connectivity. Compatible with a wide range of field proven hardware platforms and combined with simple interfacing with a variety of industry standard GIS software.
The DIGICAT 200 GIS is an ideal solution for systems integrators seeking to integrate buried service locating with GIS and survey mapping processes, using industry standard wireless connectivity. The advanced data output format provides system integrators with the opportunity to further develop innovative data capture and operational management solutions to meet new market opportunities.
|
|
The RD500 is a locator for underground plastic water pipes. A transonde is used to vibrate the water as it passes through it and across an internal spring system sending a minute sound wave back along the pipe. This sound wave is then detected using the RD500 receiver hence locating the water pipe.
Key features:
- Simple operation - a meter deflects showing pick-up of the vibrations on the water pipe
- No disruption of services while locating
- Audible and visual tracing indicator
- Variable Power Pulsers (TransOnde) supplied
- Distances up to 800 metres may be traced
- Locate up to 2 metre depth
|
|
|
For nuclear power plant steam generator tubes, Zetec's Compliant Low Noise (CLN) bobbin probe uses advanced materials, design, and production to provide clean eddy current data that is consistent through the life of a probe and the duration of inspection. The CLN probe's immunity to ambient noise sources and ability to dissipate electrostatic charges ensures reliable data quality and more consistent probe-to-probe performance. The CLN probe is highly flexible for navigating small radius u-bends, yet maintains high data quality and minimal data drift in straight sections. Whether analysis is automated or performed manually, Zetec's CLN bobbin sets a new standard for efficient and accurate inspections.
|
|
| ... products without technical information |
| |
. Low pressure: from 1 to 7 bars
. Electromagnetic hardening
. Watertightness, with gases and the air
. Fire resistance, to the explosions, the chemicals
. Radioactive containment
. Resistance to the vibrations, the rodents, the cold heat/
. Classification marinades has and H
|
|
|
Cat Pipelayers have been the standard of the pipelining industry for decades. A worldwide network of Caterpillar dealers, in tune with the special high production needs of pipeliners, supports these durable, dependable machines.
|
|
Application Pontencial:
Submersible heaters, containers, valves, pumps, form, process and plate heaters.
This mineral-insulated heating cable with a braiding of high grade stell 14541 is applicable within extreme corrosive and damp surroundings. The HIL heating cable is extremely robust and easy to bend. The stainless stell brainding is waterlight, oiltight and gastight. An utilisation temperature of up to 800°C enables a variety of applications. The cold end of the heating cable can be fed into a terminal box and connected by means of a MX20X1.5 screwed connection.
|
|
|
The heating sleeve is a special physical form that can be adapted to the specifications of tubes and cartridge. Conventional dimensions as well as special shapes for one or more casks can be realised. The finished heater consist of a heated inside tube, thermal insulation and an outer jacket. Theses are available in a diverse array of high- quality materials that can be selected to match the application. The compact design with self-regulating PTC heating elements or standard heaters with integrated regulation guarantee optimal functionality and the highest level of safety.
|
|
Applications:
heating or het-loss free transport of: oil, grease, wax, resin, tar, paint, water, carbon dioxide, plastics, sealants, etc...
Emplyable pressurised hoses of PTFE from DN 4 to 50 mm; pressure train depending on nominal width up to 600bar.
|
|
HEATED HOSES - for gas and liquid transfer.
During Gas Analyzer Sampling, Hot Melt Transfer, Petroleum or Chemical Transfers, or Food Processing, it is needed to maintain critical temperatures, to avoid condensation of gas or drop in fluid temperature. Thermo Heated Hoses aptly cater to this need, by ensuring that the fluid in the process tube (part of the heated hose), looses no heat.
These flexible and lightweight tubes can withstand aggressive high pressure fluids and high temperatures involved in transfer of fluids.
Construction
Heated Hose comprises of a process tube bundled with insulated electrical heating element and wrapped with a heat reflecting foil. Temperature sensor is provided at about 300 mm from power connection end. This bundle is insulated and provided with an outer jacket. Ends are sealed suitably and electrical connections for both power and control are brought out.
|
|
| ... products without technical information |
| |
Air Wipe Blow-Off System - Ring-Blade:
Air Wipe Blow-Off System - Ring-Blade from Nex Flow is easy to mount and maintain and reduces both compressed air consumption and noise levels.
It produces a "laminar" flow of air along its 360º angle using the "Coanda" effect which "entrains" a large volume of air from the surrounding area along with the small amount of compressed air from the Ring-Blade air-saver wiper-blade to produce an output flow up to 30 times.
Air Wipe Blow-Off System - Ring-Blade pay back on compressed air savings can be as soon as a few weeks in some applications when compared to nozzle "rings" or simple annular slots used by other air wiping systems.
Blow-off, cool & clean items like pipe, cable, wire and hose with the Air Wipe Blow-Off System Ring-Blade from Nex Flow.
Air Wipe Blow-Off System - Ring-Blade Features:
- System is made of coated aluminum to provide even air flow 360º around the part.
- Designed as two pieces hinged together to open and close around the part.
- Instant on-off with no moving parts, no electricity or explosion hazard.
Air Wipe Blow-Off System - Ring-Blade Benifits:
- Even blow off around the part, light in weight and compact.
- Easy to install and maintain and allows removal of a continuous piece.
- Reduced compressed air use for energy savings plus lower noise levels.
- Maintenance free with output easily controlled, safe to use.
|
|
Air Wipe Blow-Off System - Ring-Blade:
Air Wipe Blow-Off System - Ring-Blade from Nex Flow is easy to mount and maintain and reduces both compressed air consumption and noise levels.
It produces a "laminar" flow of air along its 360º angle using the "Coanda" effect which "entrains" a large volume of air from the surrounding area along with the small amount of compressed air from the Ring-Blade air-saver wiper-blade to produce an output flow up to 30 times.
Air Wipe Blow-Off System - Ring-Blade pay back on compressed air savings can be as soon as a few weeks in some applications when compared to nozzle "rings" or simple annular slots used by other air wiping systems.
Blow-off, cool & clean items like pipe, cable, wire and hose with the Air Wipe Blow-Off System Ring-Blade from Nex Flow.
Air Wipe Blow-Off System - Ring-Blade Features:
- System is made of coated aluminum to provide even air flow 360º around the part.
- Designed as two pieces hinged together to open and close around the part.
- Instant on-off with no moving parts, no electricity or explosion hazard.
Air Wipe Blow-Off System - Ring-Blade Benifits:
- Even blow off around the part, light in weight and compact.
- Easy to install and maintain and allows removal of a continuous piece.
- Reduced compressed air use for energy savings plus lower noise levels.
- Maintenance free with output easily controlled, safe to use.
|
|
|
|