|
|
PUSH LOCK CABLE CLAMPS AND SNAP LOCK CABLE CLAMPS DESIGNED TO INSTALL WITHOUT DAMAGE AND TANGLES TO SENSITIVE WIRE/CABLE/HOSE BUNDLES
Heyco Products, Inc., a leading ISO 9001:2000 US-based designer and manufacturer of wire protection products and electrical components, is now offering a new line of Push Lock Cable Clamps and Snap Lock Cable Clamps for clamping cable/wire/hose bundles securely in place.
Both clamp types resist corrosion, salt water, weak acids, grease, and common solvents (non UL certified or tested).
|
|
|
HellermannTyton’s snapper hose clamps are lightweight, corrosion resistant hose clamps manufactured from high performance, thermoplastic materials selected to work well in a variety of diverse environments. A quick, ratchet closure provides for reduced assembly line time and allows for application after connection of the hose. Hose clamps may be applied using one of HellermannTyton's hose clamp tools.
|
|
This is the classic product group. You'll still find products here from the early years which are still very popular with the installers and are processed in large quantities to day.
The newer product series of the anchor and C-profile rails with the accompanying clips and yoke clamps have still a high significance in the everyday workflow, too.
|
|
Please use the link to check our full range of Wire Handling Hardware.
We can also custom mould if you require a special size or configuration.
|
|
We offer a comprehensive range of wire, cable and hose management products in both fixed and adjustable holding diameters. Plastic clips, clamps, wire saddles and kurly lock designs in addition to innovative products such as Cableater (SHR) and Raceway, are available. These parts have a wide variety of mounting methods including self adhesive tape, screws, rivets, blind hole and push through arrowhead designs.
Electronic insulation of components on the PCB and chassis can prevent electronic shock. Our product range offers plastic transistor insulating sleeves, mounts, rings and pads that will fit most standard transistors, fuses and other electrical components.
Products are suitable for high voltage and high temperature applications for assembly methods such as wave soldering and potting. Products for electrical insulation can be used with screws, pin plugs and receptacles.
Custom parts are available. Please contact you local Richco office to discuss your requirements
|
|
HeycoJ Wire and Cable Holders
Vertical Orientation-Top Entry (A) Horizontal Orientation-Side Entry (B)
Galhers and directs single or groups of cables al low cost.
Two orientations: Vertical for top entry and narrow width; Horizontal for side entry and low height where clearance is a problem.
Two gate types: Regular gate secures cables with tension alone; Latch gate locks cables in place.
Both types install with fingertip pressure Into a 3/16" (4.8mm) diameter mounting hole.
Bayonet mount self-adjusts to various chassis thickness up to .090" (2.3mm).
6/6 nylon with a 94V-2 flammability rating.
Temperature rating 85°C.
W Recognized under the Component Program of Underwriters' Laboratories File #E-54523
|
|
We propose you a new range of Cable Clips, Clamps & Cable Ties.
Recommandations apply for most electronic, electrical and electromechanical uses.
Our product are made to be easily installed
|
|
|
HellermannTyton's offers a wide variety of lightweight, corrosion resistant clamps and clips manufactured from high performance, thermoplastic materials selected to work well in a variety of diverse environments.
|
|
|
HellermannTyton’s snapper hose clamps are lightweight, corrosion resistant hose clamps manufactured from high performance, thermoplastic materials selected to work well in a variety of diverse environments. A quick, ratchet closure provides for reduced assembly line time and allows for application after connection of the hose. Hose clamps may be applied using one of HellermannTyton's hose clamp tools.
|
|
3M™ Dual Lock™ Reclosable Fastener
Strips of flexible plastic covered with mushroom-shaped interlocking heads that fasten securely when pressed together. Available with 3M™ VHB™ Tape backing for permanent attachment of the strip to the substrate. Plain-backed version can be sewn, stapled or ultrasonically welded to the substrate.
|
|
|
Wiring Accessories are an integral part of PANDUIT's comprehensive selection of wire management products. We are committed to continually provide innovative, high quality products engineered to speed installation and lower your installed costs. To help assure optimum quality, PANDUIT products are designed and manufactured to meet applicable quality standards including International, UL, Military, ISO, and Aerospace.
|
|
Arrowhead Mount Cable Tie - WIT-50RLA
- Snaps into a pre-drilled hole for quick mounting.
- Bundling of cables can be done either before or after mounting.
- The arrowhead mount rotates in the hole to self-align the wire bundle.
- The one-piece mount and harness saves time and money.
- The WIT-50RLA is available in four different length areas for a variety of bundle diameters.
- It offers 50 lb tensile strength and is RoHS Compliant.
|
|
ITW TekFast Routing Clips secure hoses and tubes for the automotive industry. Various design features provide options to satisfy your application needs.
Key benefits and design options:
- Tube retention - Fold-over latches, rabbit ears, and snails are a few of the many retention features available.
- Panel fastening - Pinloks, W-prongs, Christmas Trees, and Vari-Studs are some of the fastening methods available.
- Special Design Options - If you have a special need, we will work with you. For instance, Santoprene inserts can be added for vibration dampening, conductive resin can be used to dissipate static electricity, and spin weld pads can be added to secure the clip.
|
|
Tap-In
Masonry Wire Tap In, routes wires along concrete, brick, mortar, cinder blocks and other hard surfaces—without drilling.
|
|
|
HellermannTyton offers a wide variety of cable ties with integrated mounting bases. The mounting bases are used in conjunction with cable ties to stabilize and secure wiring bundles, both indoors and outdoors.
|
|
|
Double head ties can be used for installation of a second parallel cable run without the need for additional cable ties. The tie's second loop may also serve as a positioning device for a single bundle.
|
|
Material : Polyamid 6/6
Dimensions:
width : 4.8 or 7.6mm
length: 150mm, 200mm, 250mm, 350mm
Standard color : Black or Natural
For a simple and quick use for plastic and cloth bags
Available colors: Red, blue, yellow, brown, green, white
Packaging: par bag of 100 pieces
Delivery time: available on stock
Customs tariff :
39 23 90 90 for color natural or black
39 23 50 90 for the other colors
|
|
Polyamid 12 ties
Description :
Good resistance on thermic and humidity variation
Resist to chemical agents and UV effects
Resistant to fire : UL94HB
Width: 9mm
Length: 132mm, 180mm, 265mm, 300mm, 360mm, 500mm, 750mm
Material : Polyamid 12
Colour: Black
Option:
Tightening tools
Packaging : bags of 100 pieces
Delivery time : available on stock
Customs Tariff : 39 23 90 90
|
|
Easy and quick remove
Material: Polyamid 6/6
Standard color :Natural
Packaging: bag of 100 pieces
Delivery time : available on stock
Option : Black color
|
|
Over 100 variants. Which one is right for you? From wrap-around labels to inscribed aluminium circular blanks.
Label sleeves KT (standard sleeve)
High-quality, fully transparent label sleeves for labelling wires, cables and conduits. They hold the idents (BK) and the ACS labels type KS 4... or DM 4... Six versions are available covering the entire core cross section range from 0.22 mm² to 120 mm². The sleeves come in different lengths. The special KT 2/20x9 or KT 2/35x9 sleeves are for multi-line single wire labelling. They hold the ACS labels type KSO or DM 9...
Label sleeves KTH (halogen-free)
High-quality, fully transparent, halogen-free label sleeves for labelling wires, cables and conduits. They hold the idents (BK) and the ACS labels type KS 4... or DM 4... Five versions are available covering the entire core cross section range from 0.22 mm² to 50 mm². The sleeves come in different lengths.
Label sleeves KTH/Q (halogen-free / high packing density)
High-quality, halogen-free two-part label sleeve for extreme demands. The geometry of the sleeve only causes a minimum increase in diameter of the cable. The trapezoidal design makes for rapid and simple installation. They hold the idents (BK) and the ACS labels type KS 4... or DM 4... Eleven versions are available covering the entire core cross section range from 0.14 mm² to 240 mm². The sleeves come in different lengths.
|
|
| ... products without technical information |
| |
|
Using its knowledge and experience in the field of material design, Raychem has pioneered some of the most important technical advances in cable accessory technology. Heat-shrinkable accessories are well accepted for medium-voltage distribution by utilities, equipment manufacturers and industrial users throughout the world. For fifteen years, accessories have also been available for 69kV, 72kV, 84kV transmission-voltages. For higher voltage classes we offer 145kV to 170kV prefabricated joints and terminations for indoor and outdoor switchgear and transformers
|
|
|
Splice connectors emply the same method of cable installation as pin type connecors with the important exception that both cables being joined MUST be fully inserted into the connector and hand tightened before wrench tightening.
|
|
| ... products without technical information |
| |
Vertical cable coil storage provides a considerable saving in space compared to the traditional ground storage systems. Space utilization rations can be as high as 1 to 5 if the drums are arranged vertically up to heights of 5m, allowing on average 5 drum levels.
This system not only allows for a better use of space but has other advantages such as:
„X quick identification of the drums to be withdrawn;
„X quick withdrawal of cable lengths directly from the stored drum.
The drums are fastened to a shaft with locking cone on supports that allow the rotation of the drum and therefore high speed unwinding with our machines.
Our racks are also provided with patented safety system (quick functional operation) to prevent the drum coming out of position and this allows the operator to work safe however the drum is placed (cable top up or down).
|
|
VERTICAL RACK FOR COILS AND REELS MAX DIA.700 MM DIAM. ART. SU.
(Special version up to dia.1000mm).
|
|
| ... products without technical information |
| |
... see all the products in the category
Relays
|
|
|
see the results for the following category
