Drain tap (to +150 °C) . For water baths 4/6/12/26/33. Order No.: 8970452 This accessory is suitable for: CF30, CF31, CF40, CF41, HE-4
Shut-off valve M30x1,5 female to male (-60...+200°C) Order No.: 8970852 This accessory is suitable for: PRESTO A30, PRESTO A40, PRESTO A45, PRESTO A45t, PRESTO A80
Drain port, stainless steel, for straightforward draining of the bath.
SPECIFICATIONS : Male conical threaded BSP For decanting
Body material Brass Ball material Brass PN (End) PN10 End Male/Male BSP Contact sealing PTFE Operating system Lever
Constructed with either PE, PP and PTFE polymers, the StopCock spigot is designed for installation on containers with 3/4 in (19 mm) connection threads. Its rotating spout guarantees drip free use and water tight installation. Also, when ...
Developed and engineered by Bürklem, this compact range of stopcocks for barrels and canisters are characterized by their miniature build. The compactly built discharge component is designed to not stick out beyond the container's lower ...
Specifically made to be sturdy and a high quality ball valve, the IBC discharge valve have a hose connection and connection adapter. It is suitable for connection threads with S 60x6 external or 2" internal sizes. it has a discharge valve ...
The IBC discharge valve is a well-built, high-quality ball valve with one flow and applicable for connecting threads, such as S 60x6 external or 2" internal. It can cope up with the maximum operating pressure of 10 bar (at +20°C) ...
Commercially available spigots made of the materials polyethylene or polypropylene cannot be used for solvents. The spigot StopCock PA is made of electrically conductive polyamide and therefore perfectly suitable for solvents.
Single Faucet Deck Mounted, Wrist Blade Lever, Swing Gooseneck Body: Solid brass Coating: High gloss epoxy powder resistant to most chemicals UV fading and heat Ceramic headwork: 90° turn 500,000 hfc cycles water static ...
One Piece Reduced Bore Ball Faucets Technical Features: • Body: stainless steel Aisi 316 • Ball seats: PTFE • O-ring: NBR • Threaded end: gas male according to UNI ISO 228/1
This device measures approximately 35mm in diameter. It comprises an acoustic grill and restricted flow and is manufactured by CoorsTek. These devices have uses in industry but can also be used in homes. Customers should contact the CoorsTek ...
Spring bottom cocks tested at 80 psig air • Standard parts are satin brass • Some part numbers are available in polished brass or satin chrome. Contact customer service • Maximum temperature is 500°F
Equipped with a dependable, simple, and hassle-free design, the AWH ball cocks provide a simple yet optimal solution for shut-off tasks. The AWH ball cocks is suitable for a myriad of energy and auxilliary media. They can be employed ...
Plug-cocks suitable for all kind of fluids at low working pressures.
Plug-cocks suitable for all kind of fluids at medium working pressures.
Block & Bleed Manifolds S Type AS-Schneider Block & Bleed Manifolds are designed for mounting to Pressure Gauges, Pressure Transmitters and Pressure Switches. The standard vent connection is 1/4 NPT female. Pipe plugs are not installed ...
For viscous fluids in drums, in grey iron or red iron, brass locking plate. Seals (external) in grey cardboard. For drum threads R 1/2", R 3/4", R 1", R 1 1/4", R 1 1/2", R 2", R 2 1/2&", R 3", R 4".
Stopcocks made of PMP. Plugs of PTFE with polished surface turn easily but fit thightly. Insert with two seals. Art. no. 105799: For burette tubes inner diam. 7.75 ± 0.1 mm. Art. no. 105899: For burette tubes inner diam. 11.5 ± 0.1 mm.
A ruggedly constructed stopcock with solid glass plug and tapered flange which insures maximum strength at the seal. Bore of side arms is equal to or slightly larger than bores of plug on all sizes. For plugs, see 8223.
A range of glass stopcocks which meet the specifications of DIN 12541 Manufactured from borosilicate glass with interchangeable key Leakage rate meets the requirements of DIN 12540 i.e. 0.1mbar l/s-1 Supplied complete with key retaining device
Manufactured from borosilicate glass with PTFE keys for highest resistance to chemical attack Barrels are highly polished and the keys are self lubricating avoiding the need for stopcock grease Keys are fully interchangeable and supplied ...
Stopcock, Straight, Glass Plug Supplied complete with plug and metal clip.
The 08540 model is a control flow laboratory tap that has been approved and tested by the FM. It has a thread size of 19 mm that minimizes the flow of liquid. It also features a flame arrestor that makes it suitable for ...
Acc. to DIN 12541-1 and in addition to DIN standard,with solid glass plug and screwthread retaining device,one straight bore, material: borosilicate glass 3.3, leakage rate acc. to DIN 12540-1
With solid glass plug and screwthread retaining device, two oblique bores, material: borosilicate glass 3.3,leakage rate acc. to DIN 12540-1