|
|
Composite cables
Axon' design and manufacture composite cables specially designed to meet customer requirements irrespective of the application.
They are able to resist the most demanding electrical, mechanical and environmental requirements.
Advantages
Dependent on the application
- Flexibility
- Flexlife, resistance to torsion
- Resistance to fuel, heat and solvents
- EMI protection
Resistance to sterilisation (medical application)
Construction
- Flat or round construction integrating flat or round wires, coaxial cables, tubes, shielded cables, ...
- Hybrid electrical, electro-optical cables
Composite cables insulated with fluorinated materials, heavy metal free materials, halogen free materials, PTFE, celloflon®, vitax™, PEEK, silicone and other materials suited for your applications
Applications
- Electromechanics
- Engines
- Machines
- Robots
- Medical imaging
- Endoscopy
- Radars
- Missiles
- Electronic systems
- Satellite cabling
- Research, ...
|
|
OFS offers a suite of optical fibers, cables, and custom connectorized probes for delivering high laser powers for medical and industrial uses. We offer reusable fibers for aesthetic laser treatments and disposable fibers for urology. Industry uses our fibers in their lasers for cutting, welding, and etching.
Our HCXtreme™ Optical Fiber product line for high power under tight bends offers fibers in a selection of core sizes and numerical apertures, addressing the need to transmit high laser powers at the same time the fiber is subject to extreme bending conditions. Additionally, because many of these fibers are intended for intra-body use, they are biocompatible, non-toxic, and sterilizable.
Other large core HCS® optical fibers are available for specific applications. OH content, numerical aperture, core size, cladding and buffering materials can all be adjusted to meet specific needs.
|
|
Polymer optical fiber (POF) has been on the market for many years. Both the fiber core and the cladding are made of polymer. Key advantages of polymer optical fibers are high flexibility (high alternate bending resistance with smaller bending radii) as well as more economical connecting and transmission technology than in the case of glass. Moreover, this type of fiber also has all the major benefits of a fiber optical cable connection: EMC security, clear galvanic separation, no crosstalk, low weight, etc.
POF can meanwhile be used to connect over distances up to 70 metres, which is normally sufficient for both industrial environments and smaller office as well as home networks. It is even possible to cover distances up to 150 metres by selecting suitable active components.
Step-index standard POF
Step-index POF with low/high NA
Step-index POF for high temperature
Step-index POF for fast ethernet
Graded index POF
POF cables with UL-Standards
|
|
Polymer cladded fiber (PCF) has been on the market for many years, standing out by being very robust and easy to assemble. Compared with thick-core glass fibers, they are not only more robust but also considerably cheaper.
PCF consists of a silica core with polymer cladding. What is especially important here is good adhesion of the cladding material to the glass core, which does not go without saying because of the different expansion coefficients especially at high temperatures. This is where the many products on the market differ most. It is also why there are a vast number of different abbreviations such as PCS, HCS, HPCF, etc.
Low attenuation makes it possible to cover distances up to 500 metres with systems designed for POF (about 660nm), and up to 4 kilometres with 850 nm systems.
Cables
Fiber specifications
Connectors
Assembly tools
Measuring equipment
Cable Assemblies
|
|
Fast and trouble-free communications are taken for granted nowadays. To make this possible, hundreds of kilometres of cable thread through office buildings and factories, linking equipment, floors and buildings. Even whole countries are interlinked by cable.
Fiber optic cables provide the ideal solution for future-proof installations because they enable not only high rates of data transmission with major spare capacity, but also the highest possible degree of operating security.
Indoor Cables
Universal Cables
Outdoor Cables
Fiber optic cables for special applications
Cables with UL-Standards
|
|
|
OFS offers a broad range of standard and custom single-mode fibers. Fibers are available to support operating wavelengths from visible to infrared (380 - 2100 nm). Numerical apertures from 0.11 to 0.25 are available standard or can be specified in a custom fiber. Mode field diameter, attenuation, bend performance and other critical performance and aesthetic measures can also be specified. A variety of operational and installation environmental conditions can be supported through the fiber's design and/or coating composition.
|
|
The SC-Module from GES Electronic & Service enable simple wiring of optical transmitters and receivers with high transmission rates on long distances and can be equipped by "snap-in" with up to three fiber glass connections of different fiber-types. One complete system can consist of up to seven Modules adding up to 21 optical fiber connections!
Light waves do not have any potential risk concerning spark formation and are absolutely resistant against electric and electromagnetic fields. These advantages particularly enable the use of the SC-Module in explosive environments, in High Voltage Applications and generally under harsh industrial conditions and FTTx-Applications.
|
|
KITS
Amphenol Fiber optic provides termination kits for maintenance on cable assemblies and terminating cable assemblies on single or multiway butt joint and expanded beam connector. These kits contains all necessary tools to terminate connector.
To use the kit with benefits, a minimum training is required.
OTHER FIBER OPTIC PRODUCTS
As part of our Total System Support policy, Amphenol expertise and support are at your service from R&D to prototyping and production of transmission links as well as special devices and cabling or repairs.
|
|
Modern designs for optical fibre cables of the HELUCOM® series exhibit the same robustness as for a copper cable. The cable constructions are selected for optimum protection of the optical fibres in each application.
Within the HELUCOM® series, optical fi bre cables are available with the common fibre types of 50/125m, 62,5/125m and 9/125m. The HELUCOM® optical fibre cables are manufactured in accordance with the standards and regulations of DIN VDE 0888.
|
|
|
HellermannTyton offers a full range of Fiber Optic connectivity products including patch panels, jacks, faceplates, and patch cords. Continually updated, these products meet the latest industry standards, and aggressive system and product warranties are offered with this line.
|
|
|
Fiber-optic cable required for connecting the hardware components of a VersioBus servo network or a VersioBus I/O network. Required for IM-300 I/O modules in any interface system, or for DC-150 servo modules in the VersioBus interface system.
|
|
|
Thorlabs stocks the largest selection of single mode and multimode optical fibers in the photonics industry. In addition, we offer next-day shipping on small lots of custom patch cables assembled using our standard fibers.
|
|
|
Optical Fiber, part of Corning’s telecommunications segment, is the world’s leading producer of optical fiber and continues to lead the telecommunications industry in the development of new fiber designs and technology, offering a full line of single-mode and multimode optical fibers for all network applications.
|
|
Draka Comteq offers a wide range of fibre optic outdoor cables with state-of-the art fibres. All desired cables can be produced with gradient or single mode fibres according to national or international standards and requirements. The full range of Draka Comteq fibre cables is at your service.
Draka Comteq being an internationally approved supplier serves numerous small and big customer world-wide. For example a wide range of fibre optic cables are produced for and sold to German PTT / Deutsche Telekom AG (specification TS 0000/12.98) and German Railways / Deutschen Bahn AG (specification Dlk 1.011.003 y).
|
|
Gore provides high performance fiber optic cables for military, aerospace and communication applications. Traditional fiber optic cables negatively affect the optical stability of a bare fiber. The Gore product line incorporates a patented expanded PTFE buffer system that effectively decouples the optical fiber from other cable elements. As a result, optical performance of a Gore cable closely approximates that of a bare optical fiber, even under mechanical or thermal stresses.
Gore is partnering with Deutsch Ltd. to distribute Deutsch Fiber Optic Connectors within the United States and Canada. Gore will continue to offer GORETM Fiber Optic Assemblies with various connector options including Deutsch connectors.
|
|
CMFO4
4" fiber optic markerArticle Number: 597-00042
Part Number: CMFO4
Type: CMF
Part No: T50L0C2
Article No: 111-00445
Heavy Duty Cable Tie, 120 lb. 15.24" Max. Bun. Dia. 4.13" PA66, Black, 50/pk
Part No: T120R0K2
Article No: 112-12060
Cable Tie, 50 lb. 7.9" Max. Bun. Dia. 1.97" PA66, Gray, 100/pk
Part No: T50R8C2
Article No: 111-04870
Cable Tie, 50 lb. 7.9" Max. Bun. Dia. 1.97", PA66, Black, 100/pk
Part No: T50R0C2
Article No: 111-04878
Cable Tie, 50 lb. 7.9" Max. Bun. Dia. 1.97", PA66, Natural, 100/pk
Part No: T50R9C2
Article No: 112-05019
|
|
OSI PreCONNECT® and OSI PreCONNECT® HDCS are products developed by OSI Fiber-Optics which present an integral system solution for structured cabling purposes, in which the components are designed to fit together in an optimal way.
|
|
Fibre-optic (FO) cables should be your first choice for applications in tough industrial environments when you need long transmission paths (up to 120 km!), if you need to take account of EMC issues or if you must ensure electrical isolation in the case of potential differences.
|
|
Today and future communication technology demands fast, efficient and safe performance in the data communication process. Large and complex databanks all interconnected must be able to receive and transmit data without outside interferences. CONEC manufactures an extensive fiber optic connector produce line. The CONEC developed and manufactured fiber optic connectors are the right solution for such complex systems. Also the fiber optic connectors such as PLUG-PLUG combination have the fiber ends incorporated.
In order to achieve accurate and precise connections of the fiber ends, very high quality ceramic components are used. The fiber optic connectors made with precision and high quality ceramic components provide a high reliability connection when used with the various adapters.
The standard fiber optic connector series is available in SC, ST, FC and LC. Type MT-RJ is for use with fiber modem applications. All fiber optic connectors are supplied
|
|
|
These fiber optic cable assemblies are designed to be used in cellular towers. Resistant to harsh environments, Amphenol's outdoor cable assemblies are totally immune to interference, EMI, RFI, and ESD including lightning. Cable assemblies come in 2 and 4 positions and are fully mate-able with Huber & Suhner.
|
|
In order to ensure the highest technical performance and to provide the optimum solution for a diversity of applications,
LEMO has developed four types of fibre optic contacts; designated F1, F2, F3, and F4. These contacts are designed to
operate with single fibre, multi fibre, and mixed fibre optical/electrical cable constructions and cater to single and multimode
fibres from 9/125 to 1500 µm diameter.
The choice of fibre optic contacts depends upon the following criteria:
- Cable construction (single fibre, multi fibre, mixed optical/electrical)
- Fibre type (single-mode or multi-mode).
|
|
FIBER OPTIC CONNECTORS
The improved security...resistance to EMI, RFI and EMP...and low transmission losses inherent with fiber optic data transmission systems have resulted in thier increasing use in aerospace, defense and telecommunication applications. G & H Technology has met this growing demand by developing an expanded range of fiber-optic interconnect products incorporating single and multiple mode fiber diameters ranging in sizes from 50 to 1000 microns.
|
|
|
Easy fiber patch & splice connectivity hardware for universal use - rack or wall mounted. Simplify your real world with factory performance stubbed hardware, patch cords and preconectorized cables.
|
|
|
HellermannTyton offers a full range of Fiber Optic connectivity products including patch panels, jacks, faceplates, and patch cords. Continually updated, these products meet the latest industry standards, and aggressive system and product warranties are offered with this line.
|
|
|
|
|
|
Molex's MTP round jacketed ribbon cable assemblies provide easier installation than traditional flat ribbon cables in optical networks. System designers and installers have found it difficult to route flat ribbon cable in complex networks. The use of round ribbon cables allows the installer greater flexibility when routing multiple jacketed cables in dense system networks.
Molex developed a patented transition sleeve which maintains the routing features of the round cable while allowing the cable to be secured to the MTP connector. The primary benefit of the round ribbon cable is realized with the use of multiple ribbons within a single jacket. Stacked ribbons in traditional flat jacketed ribbon cables are prone to piston in relation to each other, causing attenuation in longer cable assemblies. The round ribbon cable prevents the "pistoning" effect by encasing the ribbons in a solid buffer core, preventing them from moving. Fiber counts up to 24 fibers are currently available while development continues on the 48 and 72 fiber versions.
|
|
|
|
|
|
Features:
- Exceed TIA/EIA-568-B.3 requirements
- Insertion loss: 0.3dB average (multimode and singlemode)
- Return loss: >26dB (10Gig™ multimode), >20dB (multimode), >50dB (singlemode)
- Include color-specific keys with positive and negative keying features to visually and mechanically distinguish connections to prevent unauthorized mating with unlike keyed or non-keyed adapters
- Part of a complete Keyed LC System that includes Opti-Core® Patch Cords and Pigtails, OptiCam® Pre-Polished Cam Connectors, Opticom® Fiber Adapter Panels (FAPs) and Mini-Com® Adapter Modules
- Translucent housing assembly is laser marked to identify fiber stub fiber type (9µm, 62.5, 50 or 50X)
- Spring-loaded "Senior" rear pivot latch LC connector
- Quick installation; provide field termination in less than half the time of field polish connectors
- Patented re-termination capability provides yield rates approaching 100%
- Factory pre-polished fiber endface eliminates time-consuming field polishing to reduce installation costs, labor, scrap and the number of tools required
- Cam activated fiber and buffer clamp mechanisms provide superior fiber and buffer retention - less sensitivity to fiber tensile loading
- No separate clamps, tools, or steps are required to secure both the fiber and the buffer
- OptiCam® Termination Tool simplifies tooling and termination, and virtually eliminates operator error by providing visual indication of proper termination after the cam step has been completed
- Cable retention boot assemblies consistently provide higher than industry standard cable retention
- Non-optical disconnect maintains data transmission under tensile loads for jacketed cable
- Fiber cable size: accept 900µm tight-buffered fiber with included boot(s); accepts 1.6mm - 2.0mm and 3.0mm jacketed cable with available OptiCam® Cable Retention Boot Assemblies (ten per package)
- For 250µm coated fiber termination, use 250 micron fiber build-up tube kit or fan-out kits
- Ferrule type: 1.25mm zirconia ceramic (highest durability for repeated matings)
- Use OptiCam® Termination Kit (FCAMKIT)
|
|
|
Greene, Tweed's fiber optic connector products meet and exceed today's demands for fast, secure, reliable and environmentally protected transmissions. Greene, Tweed is the exclusive distributor of Lancer Systems fiber optic connectors to our customers. Our fiber optic connectivity products completely guard against fiber optic terminations from liquids, gases and particulate that irreversibly degrade optical fiber without the need for secondary protection. These connectors are corrosion resistant and hermetically sealed--allowing them to withstand the pressures and conditions of harsh environments where the competition falters.
|
|
|
Amphenol Fiber Optic Products is a premier manufacturer of optical interconnect products. Amphenol's experience in fiber optics dates back more than twenty years when the company developed the first industry standard connector, the SMA. Today we offer a complete line of products including fiber management systems, attenuators, jumpers, couplers, and service node cables which all are designed to the most rigorous industry standards.
|
|
|
|
