The BoostiK™ systems are narrow linewidth fiber laser turn-key benchtop systems based on a truly single mode, single frequency DFB (Distributed-Feedback) Fiber Laser with extremely high frequency stability and low phase and intensity noise.
The Koheras BoostiK™ System delivers up to 15W at 1 µm and 10 W at 1.55 µm.
This range of benchtop laser systems is typically ...
The new SuperK EXTREME supercontinuum lasers represent the next generation of supercontinuum lasers that are truly turn key with industry leading ...
Koheras BasiK™ are narrow linewidth fiber laser systems based on a truly single mode, single frequency DFB (Distributed-Feedback) Fiber Laser with extremely high frequency stability and low phase and intensity noise.
This range of lasers offered as compact modules typically ...
AREX is the ultra compact Fiber Laser that is setting a new reference standard in the permanent marking arena.
With the smallest marking head footprint, AREX drastically ...
FDL is a continuous wave fiber coupled diode laser (25W and 50W) which provides a unique laser ...
Laser marking solution - Fiber laser machines
Products available in 2 powers:
* 10W for the TF410
* 20W for the TF420
COMPACT & STURDY
Compact, ...
The 1 µm broadband source is based on Amplified Spontaneous Emission from a diode-pumped Yb-doped fiber. This source delivers a high spectral density output in the wavelength range 1025 nm - 1075 nm. The 1 µm broadband source uses a proprietary Multiwave Photonics ...
The C-band broadband source is based on Amplified Spontaneous Emission from a semiconductor diode-pumped Er-doped fiber, and delivers a high spectral density output in the wavelength range 1525 nm - 1570 nm. This type of source is well established ...
The L-band broadband source is based on Amplified Spontaneous Emission from a diode-pumped Er-doped fiber, and delivers a high spectral density output in the 1562 nm-1608 nm range. The source uses a Multiwave Photonics proprietary design allowing very high spectral ...
Features
White light emission from visible to near IR
Spatially singlemode ...
Item: LEUKOS SP series
Spectral bandwidth: 370 to 2400 nm
Energy: > 1nJ/nm
Repetition rate: 8 kHz | 20 kHz
Leukos light ...
Item: LEUKOS SP-UV series
Spectral bandwidth: 320 to 2200 nm
Energy: ...
Main applications:
* Metals marking
* Metals engraving
* Micromachining
* Surface ...
Main applications:
* Metals marking
* Metals engraving
* Micromachining
* Surface treatments
* Resistors ...
Main applications:
* Plastics day and night marking
* Plastics marking
* Solar cells scribing and edge ...
Fiber Laser optimized for micro and marking applications
The PowerLine F series is available in different configuration levels: as pure OEM beam source, in combination with a supply unit including a main supply unit and a safety shutter, as well as a laser beam source and ready-to-use marking system. The 20 watts and 30 watts pulsed fiber ...
The industrial grade femtosecond laser StarFemto is suitable for most precise laser cutting and laser ablation of sensitive materials with almost no thermal input.
"Cold" laser cutting and ablation with femtosecond lasers is one of the most promising technologies ...
StarFiber laser sources provide nominal power rates of 100 watts to 600 watts at fundamental mode beam quality. They can be operated ...
10 W Fiber Laser, 1064, 1030 OR 1080 nm Wave lengths
CW, ...
High Power, High Speed ...
High Speed Pulse on ...
ProMarker Galvo Marking Laser
...
The Speedmarker FL series uses pulsed Yb fiber lasers, which are unmatched in terms of size, efficiency and durability. The maintenance-free, air-cooled systems provide ...
JenLas® fiber cw 1000 W provides powerful cw fiber lasers with modulation rates of up to 5 kHz. They emit at power levels up to 1000 W, with an excellent beam quality: M2 <1.2 This makes them suitable e.g. for cutting applications with excellent ...
PicoFlash™ is the ultimate association of Passively Q-Switched (PQS) microchip laser technology and fiber amplification, resulting in close to one Watt of high quality UV laser light. This laser combines pulses as ...
The 7210 and 7310 pulsed fibre laser markers (10 Watt and 20 Watt respectively) are compact and versatile and can be used reliably, quickly and economically on metals, plastics and other hard-to-mark materials. This makes the Videojet 7210 and 7310 ideal for marking tools and instruments, as well as for use in the electronics, automotive ...
The new Fianium SC450-8-VE is the most powerful
supercontinuum laser commercially available with over 8W
of total optical power and a spectrum optimised to provide
maximum visible light content. With over 1.5W in the visible
wavelength range, in a single-mode beam, the system sets the
new standard ...
The FP1060 series a high power ultrafast fiber laser based on an
inherently robust self-starting picosecond fiber laser oscillator
and high-power low noise fiber amplifier. The FP532 version adds
fully integrated high-efficiency ...
The FP1060-fs series is a high power ultrafast fiber laser which
utilizes efficient pulse compression to provide high quality
optical pulses of less than 300fs. The FP532-fs version adds fully
integrated second ...
Applications:
• Marking
• Material processing
• Micromachining
• Scribing
• Solar cell and Silicon scribing & processing ...
Applications:
• Marking
• Material processing
• Micromachining
• Engraving
• ...
VPFL-5000: 5 Watts Fiber Laser
APPLICATIONS:
* Marking
* Material processing
* Micromachining
* Spectroscopy
* Scribing
SPECIFICATIONS:
Operational mode: Short pulse
Wavelength: 1060 - 1080 nm
Average output ...
The new redENERGY G4 fiber laser platform builds upon SPI's highly popular G3 MOPA range bringing new levels of flexibility and performance, ...
Our redPOWER RS series of high power fiber lasers delivers substantial commercial benefits over alternative technologies, ...
Our redENERGY SM series of pulsed fiber lasers delivers substantial commercial advantages over alternative technologies, offering you a leading edge advantage.
...
