|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
| ... products without technical information |
| |
|
Excellent EMI and EMI/environmental sealing designed for flange mounted connectors. Patent-Pending design
|
|
CONDUCTIVE FABRIC WRAPPED OVER FOAM OR
SPONGE CORE AND DIE-CUT AS DRAWING
SUITABLE FOR USE ON METAL ENCLOSURES OR
METALLIZED PLASTICS
(LOW COMPRESSION FORCE)
OVER 100dB AVERAGE SHIELDING EFFICIENCY IN
THE RANGE 100MHz-10GHz
RIP-STOP FABRICS THAT ALLOW
SELF-TERMINATING CUT ENDS ON GASKETS
AVAILABLE WITH SILVER OR NICKEL COPPER
FABRIC TO ASSURE THE BEST GALVANIC
COMPATIBILITY
PRESSURE SENSITIVE ADHESIVE TAPE
(optional)
|
|
|
I/O EMI shielding gasket been manufactured for the purpose of satisfy some non-frequency used equipments such as I/O of computers .it's also used in daily standard connector that not shear to input,foam can use nickel-plated (X,Y and Z axis conductivity) or ordinary PU foam.
|
|
Metex connector gaskets provide EMI shielding and environmental sealing for a wide array of connector types - including aluminum wire cloth, nickel copper alloy, aluminum and silver plated glass in connector shell sizes from 6-16".
When a connector gasket is installed between the mounting flange and an enclosure bulkhead, the gasket is compressed between the two surfaces. The elastomer provides environmental sealing, and the conductive substrate or particles embedded in the elastomer creates a low impedance electrical path between the mating surfaces.
KEY FEATURES
Wide variety of materials and connector types
Easily handled and installed
Custom connector cluster gaskets available
High shielding and sealing effectiveness
Evaluation samples
Product application assistance
|
|
|
Connector Gaskets are seamless EMI die cut flange seals in an assortment of materials and thickness. Selection of material is dependent upon shielding and pressure sealing requirements. Standard industry shell sizes with holes or U slots or custom sizing is available. Connector gaskets are used for military or commercial applications.
|
|
| ... products without technical information |
| |
Quality is the most important feature of our wide range of screw terminals. "To connect and have a free mind" is our philosophy. The whole range comprises conductor sections of 1.5 mm up to 240 mm. All terminals are made up with clamping units of nickel-plated brass profile and screws of stainless steel. Labels are available for individual identification.
|
|
|
Ensto Clampo terminal family enables you to select the right terminal to suit your requirements.
|
|
The benefits
* Comprehensive offer of variations in well-structured product families.
* Clear wiring in the control cabinet
* Definite assignment of the circuits
* Permanent and maintenance-free electrical connection
* High quality
* Testing without disconnecting the wiring
* Vibration-proof, climate and corrosion resistant, gas tight
* Meet numerous national and international standards
* Prize-winning design
|
|
| ... products without technical information |
| |
ERmet : Modular Pressfit Tools: For Male Connectors
ERmet connectors can be end to end mounted in modular layout. To be able to pressfit the selected connector layout for your application in a rationalized way, we have designed the necessary pressfit tools to be modular too. This is true of the tools both for male connectors and for female connectors. The tool bases, also termed anvils, are fixed in a tool holder. Each connector module requires an appropriately sized tool module.
The standard tool holders are designed for two 50 mm modules (modules A, B, L and M), pressfitting a total module length of 100 mm. Due to the modular tool configuration, pressfitting can be carried out in any order. Using filler elements, it is also possible to pressfit just individual modules.
ERmet : Modular Pressfit Tools: For Female Connectors
ERmet connectors can be end to end mounted in modular layout. To be able to pressfit the selected connector layout for your application in a rationalized way, we have designed the necessary pressfit tools to be modular too. This is true of the tools both for male connectors and for female connectors. The tool bases, also termed anvils, are fixed in a tool holder. Each connector module requires an appropriately sized tool module.
The standard tool holders are designed for two 50 mm modules (modules A, B, L and M), pressfitting a total module length of 100 mm. Due to the modular tool configuration, pressfitting can be carried out in any order. Using filler elements, it is also possible to pressfit just individual modules.
|
|
ERmet : Modular Pressfit Tools: For Male Connectors
ERmet connectors can be end to end mounted in modular layout. To be able to pressfit the selected connector layout for your application in a rationalized way, we have designed the necessary pressfit tools to be modular too. This is true of the tools both for male connectors and for female connectors. The tool bases, also termed anvils, are fixed in a tool holder. Each connector module requires an appropriately sized tool module.
The standard tool holders are designed for two 50 mm modules (modules A, B, L and M), pressfitting a total module length of 100 mm. Due to the modular tool configuration, pressfitting can be carried out in any order. Using filler elements, it is also possible to pressfit just individual modules.
ERmet : Modular Pressfit Tools: For Female Connectors
ERmet connectors can be end to end mounted in modular layout. To be able to pressfit the selected connector layout for your application in a rationalized way, we have designed the necessary pressfit tools to be modular too. This is true of the tools both for male connectors and for female connectors. The tool bases, also termed anvils, are fixed in a tool holder. Each connector module requires an appropriately sized tool module.
The standard tool holders are designed for two 50 mm modules (modules A, B, L and M), pressfitting a total module length of 100 mm. Due to the modular tool configuration, pressfitting can be carried out in any order. Using filler elements, it is also possible to pressfit just individual modules.
|
|
... see all the products in the category
Presses
|
|
Trading under the names Raychem, Axicom, Morlynn, Dulmison and Zibo, Tyco Electronics Energy Division offers a comprehensive range of porcelain, polymeric and hybrid solutions for the electricity supply industry. Experience in the design and manufacture of insulators exceeds 80 for porcelain, 30 years for polymeric and 20 years for hybrid products. The manufacturing processes employ some of the most advanced technologies in the field of insulator production. A commitment to quality is evidenced by independent certification of quality systems complying with international standards.
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
| ... products without technical information |
| |
Type: HICTS03-01
Application: Using protective stainless steel tube for encapsulation. The junction box in the top is waterproof with the material of Al or high temperature alloy. It has been used in many areas, such as electric power, foodstuff, medical, pressure vessel,petroleum chemical industry, which also can be used in temperature measurement with high precision for such large equipments as boiler, plastic and chemical fiber, refrigeration, etc.
Sensitive element: Pt 100, Pt200,Pt 500 or Pt 1000 (single or double)
Tolerance: According to DIN EN 60751
Temperature range: For low temperature type: -200--{400
For high temperature type: -50--{1200
Encapsulation shell:
-- diameter: 3.00 mm, length: 50 mm
-- diameter: 4.00 mm, length: 150 mm
-- diameter: 5.00 mm, length: 200 mm
-- diameter: 6.00 mm, length: 250 mm
Other types can be customized
Connection types:
-- screw thread connection
-- moveable flange
-- fixed-type flange
Wires: 2, 3 and 4-wire connection
Protective grade: according to IP 65
Option: Protective grade--Ipxx
More precision: class A, DIN1/3, DIN1/10
|
|
|
|
