|
|
The Fiber Optic pH Sensor system consists of a fiber optic probe designed to hold immobilized colorimetric indicator dye materials, plus a light source, spectrometer and OOISensors Software. You can supply your own indicator material, or select from our line of transparent or reflective films. Calibration involves recording spectra in high and low pH samples, and in at least one pH standard such as a NIST-traceable buffer.
|
|
|
|
|
|
DragonLine 24 port Gigabit Switch (PoE/Managed/2 SFP)
Features:
- 24 10/100 plus 2 MINI GBIC /RJ-45 combo switch with 24 PoE injector and build in 200W AC power
- Confirms to IEEE802.3 10BASE-T, 802.3u 100BASE-TX/FX, 802.3ab 1000BASE-T, 802.3z Gigabit fiber, 802.3af Power over Ethernet
- High back-plane bandwidth 8.8Gbps
- Rapid spanning tree IEEE802.1w
- IGMP snooping and IGMP Query mode for Multi-media application
- Port mirror and bandwidth control
- Supports GVRP function
- End point insert mode remote power feeding
- Provides extra DC 48V input with redundant function and management power status through RS-232 port
- Management by Web/SNMP/Telnet/Console
- System event log support
- Port Based VLAN /802 .1Q Tag VLAN
- IEEE802.3x Flow control
- Flow control for full duplex
- Back pressure for half duplex
- IEEE802.3ad Port trunk with LACP
- Spanning tree protocol IEEE 802.1d
- IEEE 802.1p class of service
- IEEE 802.1x user authentication
- TACACS+ (option)
- Broadcast storm filter
- DHCP client
- On line extra power supply testing through RS-232 port
- Support command line interface management
- Support SNTP
|
|
Standard Switch
DragonLine is an independent portfolio that rounds off our product range as a provider of system solutions. The portfolio consists of managed and unmanaged switches for Fast-Ethernet and Gigabit-Ethernet in industrial areas or for SOHO - applications, optionally with PoE (Power over Ethernet). The systems are available for wall fastening, DIN rail mounting or rack mounting. Moreover, Device and COM server for RS232, RS422 and RS485 interfaces are available.
- Ethernet Switches
- Industrial Ethernet Switches
- Industrial Device-Server
|
|
Optex FA Fiber Sensor BRF series
· 4 models: Standard, High Speed, Mark Detection and Moisture Detection.
· Unique "Moisture Sensing Type" BIF-W series senses the presence of water and moisture in a product.
· High Speed type (50 micro sec) and Green
LED type for Mark Sensing.
- Cross talk prevention, IP66 protection
- 10 turn potentiometer for easy and fine adjustment
|
|
Optex FA Digital Fiber sensor D2RF series
- Digital display for easy setup and easy monitoring
- Two independent output with
- High speed 60 micro second response.
- Cross talk prevention up to 4 units
- APC Function (Auto Power Control):
The APC function ensures precise sensing even when there are changes in the temperature or environmental conditions.
|
|
The fiber optic systems DL-232 connect systems with a RS232 interface via fiber optics. The DL-232 allows communication via software-handshake (Xon/Xoff).
This innovative system allows creating optical point to point and bus structures.
The ruggedness to electrical and magnetic interferences, the potential separation of transmitter and receiver as well as ranges up to 40km between two fiber optic systems are important performance features of the transmission with POF, HCS and multimode or singlemode fiber optics.
LEDs and potential free contacts of a differential relay signalize defective states
|
|
|
|
|
|
LDM80
Signal Powered Fiber Optic Modem
DESCRIPTION
The LDM80 is a small, inexpensive fiber optic transmitter/receiver completely powered by the host RS-232 port. The enclosure for the LDM80 is a conductive shell which greatly reduces RF radiation and susceptibility. The rugged metal enclosure is small enough to mount on the back panel of typical computer equipment saving valuable desk and floor space. A pair of these units allows most RS-232C cable links to be replaced and extended with a duplex fiber optic cable. The normal 50-foot (15m) RS-232 limit may be extended to 2.2 miles (3.5 km). Fiber optic data communications provide complete EMI/RFI rejection, isolation, elimination of ground loops, and reduced error rates. Data security is enhanced by almost nonexistent electromagnetic emissions. The RS-232 connection is through male or female EIA 25-pin connectors. The fiber optic connection is through ST connectors.
The LDM80 is equivalent to a 3-wire, full duplex, RS-232 circuit. Handshake signals are locally connected as in Figure 1. Indicating LEDs come on during a "SPACE" on transmit or receive data. A TD/RD reversing DIP switch is provided for connection to DTE (Data Terminal Equipment) or DCE (Data Communication Equipment) ports.
|
|
RocketLinx MC5001 and MC7001 are full-featured industrial grade serial and Ethernet fiber media converters. They are designed to meet the needs for EMI immunity and extended fiber transmission within the harsh environments typical of traffic, power, rail, and other industrial applications.
The RocketLinx family includes models supporting Single-mode and Multi-mode ports for long distance transmission. These products offer excellent immunity to electromagnetic interference, extended operating temperature ranges, and are compatible with a wide range of DC input voltages. Products are housed in rigid aluminum housings that are IP30 (MC5001) and IP31 (MC7001) rated for installation in hazardous applications.
All media converter models feature terminal block wiring connectors, and provide convenient DIP switch configuration of serial port and communication modes. All MC5001 models support RS-232, RS-422, and RS-485 serial communication.
|
|
RuggedMC™ RMC
Ethernet Media Converter (Copper to Fiber)
Universal Power Supply Options :
- 24VDC, 48VDC or HI (88-300VDC / 85 - 264VAC) options
for worldwide operability
- Integrated high-reliability power supply eliminates the need
for external power transformer
- Screw down terminal blocks ensure reliable maintenancefree
connections
- All power supplies CSA/UL 60950 approved for
+85°C (+185°F) operation
- Meets NEMA TS 2 (1998) Environmental Requirements
for traffic control equipment.
Designed for Harsh Environments
- Exceeds IEC 61850-3 and IEEE 1613 Standards for
communication equipment in electric power substations.
- Operates over a temperature range of -40°C to +85°C
without the use of fans for improved reliability
- 21 AWG galvanized steel enclosure suitable for DIN or
panel mounting provide secure mechanical reliability
|
|
|
The MTI-2100 Fotonic Sensor is a high-resoulution fiber optic based vibration/displacement sensor with extremely high frequency response. The system offers a bandwidth up to 500 kHz and resolution to 0.01 microinch (2.5 Angstrom).
|
|
|
|
|
|
Light barriers for optical fiber adaption
FL 70 R-..D
Informative display
The FL 70 R-..D is the high-end sensor for fibre optics with a 4 digit display.It is characterised by simple settings and many additional functions, e.g. fine adjustment of the switch point, inversion of the switch output, adjustment of accuracy and speed, window programming, time functions and tamperproof protection. The display is always clearly visible thanks to a 180° rotatable screen.
FL 70 RA-..D
Analogue output
The FL 70 RA-..D has an analogue output, which is of particular advantage for complex applications such as the connection of a socalled cross-section transformer. This enables e.g. checks with regard to object size and automatic edge control.
FL 70 R
The FL 70 R version operates without a display and is a cheap alternative for standard applications. An easy teach-in function is common to all of the sensor versions. Teach-in is carried out at the touch of a key and external teach-in is possible via a teach cable. The keys can also be locked.
Product advantages
» High user comfort – Teach-in
» High level of accuracy
» High switching frequency
» No mutual interference thanks to automatic communication
» Mode of operation selectable (types R-..D and RA-..D)
» Assembly on DIN rails
» Robust IP 64 protection system
» Top quality price/performance ratio
|
|
|
Fiber Optic sensors, photo lens eliminated amplifier combined with fiber optic cable, are ideal where small objects detection and quick response time is required. Moreover, the high flexibility of the optic cable allows easy installation fitting almost anywhere. Autonics fiber optic sensing amplifiers and cables of real compact body offer sophisticated part detection, quick response time and generous sensing range.
|
|
RD300-OF & RD320-OF series
Serial RS232/RS422/RS485 to multimode or single mode fiber optic media converter.
Our devices features a self configuration mechanism based on a CPLD component freed you from the tiresome operation which consist in the serial parameters setup, product is "Plug & Play".
Using fiber optic enables to use a higher communication bandwidth while offering a total immunity against EMI/RFI interferences and an increased security as well.
The optical fibre still offers other advantages : use without risk in an explosive environment, no EMC emission, no ground loops, immunity against lightning and high voltage environments, they are finally lighter, less cumbersome, inert and corrosion resistant ...
|
|
JetCon2401 is a Multi-serial to fiber media converter which adopts RS-232/RS-422/RS-485 triple mode circuits with auto baud rate and direction control. It extends the serial signal link distance to 5KM (JetCon2401-m Multi-mode Optical Fiber) or 40KM (JetCon2401-s Single-mode Optical Fiber) and also provides good immunity of EMI/EMS.
To ensure non-stop transmission in hazardous environment, JetCon2401 supports -20°~70°C wide operating temperature range.
Further more, JetCon2401 supports wide range power input (DC/AC) and DIN rail mount for quick and easy installation.
|
|
KODT2200/2200B
Multi-Serial to Optical Fiber Terminals
The KODT series is specially designed for industrial application by KYLAND. It comes as the combination of serial data transmission, Ethernet and optical technology and communication for industrial process control.
• Operating temperature: -40 to 75°C(-40 to 167°F)
• Dual redundant fiber technology, recovery time<20ms
• Serial ports: RS232/422/485
• Alarm output for fiber ports
• Dual master station backup
• 8 full duplex data channels, 8x8 digital cross-connection
• Bus control arbitration for the data conflict
• Level reversion and conversion for data interface
• Wall mounting and rack mounting
• Management software specially designed by KYLAND
|
|
RuggedMC™ RMC20
Serial Media Converter (Copper to Fiber)
Port Options :
Protocol independent RS485, RS422, or RS232
(user selectable) conversion to multimode fiber optics
(ST connector only)
RS232 to RS485/422 conversion mode
Fully EIA/TIA RS485, RS422, RS232 compliant communications
Built-in, defeatable, RS485/RS422 termination networks
Point-to-point, or optical loop configurations
Full or half duplex configurable
Support for high-speed serial baud rates from
300 to 115200 baud
Key Features :
Protocol independent (use for Modbus, DeviceNET, Profibus, DNP 3.0, proprietary, etc)
Extend lengths of serial connections (up to 5km/hop)
Media conversation is transparent to end devices
|
|
|
|
|
|
Introduction
The ICF-1150 series support 2 serial ports, with a D-sub connector for RS-232 communication and a removable terminal block for RS-422 or RS-485 communication. The 3 ports (2 serial ports and one fiber port) are completely independent. When an ICF-1150 converter receives data from any one port, it will send the data out through the other 2 ports. For example, once the ICF-1150 converter receives a command from the remote master through the fiber port, it will convert the signal and send the command through the RS-232 and RS-422/485 ports at the same time. If the user is monitoring a system running on an RS-485 network, there is no need to use an additional RS-232 to RS-485 converter to connect the laptop computer’s serial port to the RS-485 bus.
Features
• RS-232, fiber, and RS-422/485 3-way communication
• Rotary switch to change the pull high/low resistor value
• Extend RS-232/422/485 transmission up to:
1. 40 km with single-mode
2. 5 km with multi-mode
• 3-way Galvanic Isolation (for "I" model only)
• -40 to 85°C wide temperature models available
• Class I, Div. II certification (Pending)
|
|
|
|
|
|
PerkinElmer’s new Fiber Optic Module has been designed for OEM fiber illumination applications. The module uses an LED light source designed to couple high intensity white light into fiber optic bundles for applications including medical endoscopy,microscopy and machine vision. It offers an energy-efficient, maintenance-free alternative to halogen-based and metal-halide fiber optic illuminators. The LED source is comprised of high power white LEDs, patent-pending optics to precisely couple light into fiber and a heat sink. It has been designed to couple light into 3-10 mm fiber; the light is easily adaptable to a broad range of fiber manufacturers and sizes. Light intensity control electronics are available as an option.
The LED light module delivers a high intensity homogenous spot from the distal end of the fiber bundle. The new module offers a low heat, and low voltage alternative to 150-Watt halogen-based fiber illuminators. In contrast to halogen bulbs, the color temperature of LED light does not change when the light is dimmed or as the bulb ages, resulting in a consistent visual appearance.
|
|
|
|
|
|
Fiber Optic Converters
Extend Communications Up to 9 Miles!
Any two pieces of asynchronous serial equipment can communicate at half or full duplex over two fibers at rates up to 460 kbps for RS-422/485 or 115.2 kbps for RS-232 with a pair of these converters. Fiber lines are inherently resistant to EMI/RFI and transient surges, so they are ideal for data communications near heavy electrical equipment and other electrical or radio interference.
Standards can be mixed and matched so RS-232 devices can be connected to RS-422/485 devices, replacing a converter and isolator. When working with RS-485 signals, B&B Electronics’ Automatic Send Data control eliminates the need for driver software. Serial connections are on terminal blocks; multimode fiber side has two ST connectors. Requires external power supply not included.
General Features
FOSTCDRi-SC extends communication up to 9 miles
Wide temperature ranges (-40 to 80º C)
Extend signal up to 2.5 miles
Modbus ASCII or RTU compatible
Automatic Send Data control
EMI/RFI and transient Immunity
DIN rail mount
CE approved
Premium model - FOSTCDRi - features include 10-48 VDC operation, triple isolation, 2000V input/output power supply, UL Class 1 Div 2 approval, CSA approval, CE approved.
Standard model - FOSTCDR - features include 10-30 VDC operation, 2-way isolation, 2000V input/output, CE approved
|
|
Media converters for translation between copper and fibre optic media
Weidmüller Industrial Ethernet media converters provide a solution for industrial applications that require a highly reliable, robust data exchange between copper and glass fibre media. Media converters are cost-effective devices and give users the option of integrating fibre optics into their networks. The Weidmüller media converters are real-time-compatible and remain transparent in the network.
|
|
Dual digital display unit and the highest powered amplifier on the market. Monitor 2 features with one unit.
Over 80 sensor heads are available for the FS-V20 with applications in a wide range of industries.
|
|
|
|
|
|
FX-100 - top price-performance ratio powered by technological innovation
New possibilities with digital fibre sensors. SUNX has developed a new top price fibre sensor. The quick set mode allows inexperienced operators to use the sensor quickly. For experienced operators, the setting and PRO mode are still available. Other features, such as the ECO mode, copy and GETA function, enhance its practicality in the workplace. A total product range of 12 types will be available for all customers’ requirements.
Characteristics:
One 4-digit green, one 4-digit red LCD display
Copy settings via wiring as with DP-100
3-step setting hierarchy, from basic to advanced
External input for external adjustment
No need to connect amplifiers in case interference prevention is requested
Direct installation possible without bracket or DIN rail
Commercially available connector simplifies procurement
Key-lock function
Teaching, light-ON / dark-ON setting
Threshold values can automatically adjust to changes in incident light
Intensity of emitted light can be reduced automatically to ensure stable sensing
Accessories:
Various cable lengths: 1, 2, 3, 5m
End plates
Protection cover
|
|
MICRONOR optical products are based 100% on fiber optics. We make use of light in an innovative and elegant way to fulfill complex sensing requirements. These new sensors show themselves to be particularly advantageous and reliable under extremely tough and difficult environmental conditions. Areas of application such as in deep-drilling sites, wind generators, railway rolling stock, nuclear plants, aircraft braking systems and steelworks are where these products come into their own.
We offer two encoder versions and the appropriate analysis appliance:
|
|
General description :
Panasonic Electric Works Corporation of America is proud to introduce the brand new FX-100 Series from SUNX. Its ultra-slim design features a 9mm width and integrated mounting holes for installation in any application. The four chemical, visible red LED used for the emitter ensures long life operation and high-powered sensing.
This sensor incorporates a dual digital display for simple setup, along with automatic push-button teaching and external input capabilities. Advanced functions including threshold tracking, timers, LED attenuation, and interference prevention allow the FX-100 to compete with fiber optic units that are twice its price.
The connection options for the FX-100 series consist of an industry standard M8 quick disconnect along with an option that utilizes the same quick connect cable found in the SUNX DP-100 and PM series.
With list pricing starting at $75, the FX-100 series is primed to become the gold standard in fiber optic sensors.
|
|
APPLICATIONS
- Data transmission in a noisy environment
- Interface Insulation
- Remote equipment
- Interface adaptation
CONNECTIONS
RS232 :
- connector SUB D 9 pin femelle,
- connector block 3 pts TD, RD, 0V,
- Connector OF : SMA (ST in option),
- Power supply : connector block (2,5 mm2
AWG 12 max, length stripping = 8 mm)
RS232 INTERFACE
- Transmitted signals : transmit data and
receive data (TD, RD)
- Connection SUB-D 9 pin idem PC
- RTS looped to CTS and polarized to +V
- DSR looped to DTR and polarized to +V
- Signal DCD polarized to +V
- RS232 connection length : 15 to 20 m max
|
|
|
Toshiba is one of the top photocoupler suppliers in the world. We have the broadest product line-up with various output types such as Transistor, Triac, Thyristor, MOSFET (a.k.a. photorelays) and ICs, to meet different applications and customer's requirements. Toshiba introduced the LEDIP package, which has been popular in the industry. Also, the well-known white mold technology introduced by Toshiba achieves a high level of optical coupling efficiency. Toshiba is working on developing a variety of packages, functions and efficient production processes to offer the best line-up in the industry. One of the latest packages pioneered by Toshiba is Shrink Dual Inline Package (SDIP). Furthermore, Toshiba has been introducing many new products into the line-up of IC couplers, expanding the product portfolio of high-speed signal driver couplers and highly integrated power device driver couplers.
|
|
The coupler is a component of each connector system.
All OSI components are exclusively equipped with qualified brand couplers. This ensures a optimum combination with the used connector types and guaranties the specified characteristics.
|
|
|
|
|
|
These electronic devices, photoelectric sensors or photocells, use the light emission principle combined with the electronic and are made up
of an emitter or luminous source, the light rays of which are detected by a receiver. The variation in luminous signal, obtained when interrupting this ray, is converted into an electrical signal and is measured and used by
an electrical circuit. The light used is either infrared or red. By making use of this light various type of photoelectric sensors can be made. The AECO photoelectric sensors available in the FOTOSTAR range are the FT18M - FT18 -FTQ series in direct reflection, with reflector with polarized light and emitter-receiver versions. Due to their flexibility regarding the various
standard programmable versions these products offer the possibility of stocking reduction and are easily interchangeable with most of the units available on the market. They are used in the field of automation to check for the presence, counting, position control, etc., and they
are compatible with most logic programmers.
|
|
The decentralized fiber optic system IOL-3000 transfers switch signals, control signals and analogue signals via fiber optics.
Up to 8 digital switch signals (12-24VDC) and/or analogue signals (0-10V or 0-20mA which are digitalized with an A/D converter with a resolution of 10Bit) can be transmitted via fiber optics in a point-to-point structure. At the receiver the data is re-displayed as switch and/or analogue signals.
The ruggedness to electrical and magnetic interferences, the potential separation of transmitter and receiver as well as ranges up to 40km between two fiber optic systems are important performance features for the transmission with POF, HCS and multimode or singlemode fiber optics. LEDs and optionally potential free contacts of a differential relay detect failures.
|
|
FO Sensorcable:
with stainless steel loose tube for max. 4 fibers and stainless steel armoring.The cable is extremely robust, flexible, easy to deploy up to 300°C. It can be used as temperatur- vibration or acustic sensor.
|
|
|
|
