|
|
The Fiber Optic pH Sensor system consists of a fiber optic probe designed to hold immobilized colorimetric indicator dye materials, plus a light source, spectrometer and OOISensors Software. You can supply your own indicator material, or select from our line of transparent or reflective films. Calibration involves recording spectra in high and low pH samples, and in at least one pH standard such as a NIST-traceable buffer.
|
|
|
The MTI-2100 Fotonic Sensor is a high-resoulution fiber optic based vibration/displacement sensor with extremely high frequency response. The system offers a bandwidth up to 500 kHz and resolution to 0.01 microinch (2.5 Angstrom).
|
|
Optex FA Fiber Sensor BRF series
· 4 models: Standard, High Speed, Mark Detection and Moisture Detection.
· Unique "Moisture Sensing Type" BIF-W series senses the presence of water and moisture in a product.
· High Speed type (50 micro sec) and Green
LED type for Mark Sensing.
- Cross talk prevention, IP66 protection
- 10 turn potentiometer for easy and fine adjustment
|
|
Dual digital display unit and the highest powered amplifier on the market. Monitor 2 features with one unit.
Over 80 sensor heads are available for the FS-V20 with applications in a wide range of industries.
|
|
FS-Neo Digital Fibreoptic Sensor
• Complete Setup with Just One Click (New)
• Automatic maintenance (New)
• High power reduces labour hours
• World's Most Powerful Beam: 250x conventional Model
• World's Most Accurate: Detects wire as small as ø0.6 μm
• World's Highest Ambient-light Resistance: 30,000 lux
In addition to its MEGA power, the FS-N Series introduces unprecedented setup ease with one click operation.
|
|
|
|
|
|
FX-100 - top price-performance ratio powered by technological innovation
New possibilities with digital fibre sensors. SUNX has developed a new top price fibre sensor. The quick set mode allows inexperienced operators to use the sensor quickly. For experienced operators, the setting and PRO mode are still available. Other features, such as the ECO mode, copy and GETA function, enhance its practicality in the workplace. A total product range of 12 types will be available for all customers’ requirements.
Characteristics:
One 4-digit green, one 4-digit red LCD display
Copy settings via wiring as with DP-100
3-step setting hierarchy, from basic to advanced
External input for external adjustment
No need to connect amplifiers in case interference prevention is requested
Direct installation possible without bracket or DIN rail
Commercially available connector simplifies procurement
Key-lock function
Teaching, light-ON / dark-ON setting
Threshold values can automatically adjust to changes in incident light
Intensity of emitted light can be reduced automatically to ensure stable sensing
Accessories:
Various cable lengths: 1, 2, 3, 5m
End plates
Protection cover
|
|
Qualified Sensors From Taiwan RiKO
FGT-410
The fiber is a heat-resistant glass fiber. It can be used under the circumstance of 300 °C. There are two models of thru beam and reflective to be used in different circumstances. The sleeve can be made according to the need of operation from 5 mm to 90 mm. The fiber can be covered with stainless steel protective tube. It is flexible (within R degree) when wiring. It can be stably used in the high heat oven or to detect the high heat object after heat treatment.
Our products are compatible with many big brands.
Custom design is welcome.
|
|
RiKO FTD-210-32 Fiber Optic Sensor
Qualified Sensors From Taiwan RiKO
This is a side-view sensing fiber. It can be used to detect the IC pins to prevent mounting failure caused by a bent IC pin. It can also be used in a tight space. The diameter of sleeve part for FTD-210-32 is 0.8 mm and the diameter of beam axis is 0.6 mm. Even if it is used in a tight space, it can detect the objects correctly. By means of the counting for the pin quantities, it can detect the defective products.
Custom design is welcome.
|
|
|
|
|
|
Light barriers for optical fiber adaption
FL 70 R-..D
Informative display
The FL 70 R-..D is the high-end sensor for fibre optics with a 4 digit display.It is characterised by simple settings and many additional functions, e.g. fine adjustment of the switch point, inversion of the switch output, adjustment of accuracy and speed, window programming, time functions and tamperproof protection. The display is always clearly visible thanks to a 180° rotatable screen.
FL 70 RA-..D
Analogue output
The FL 70 RA-..D has an analogue output, which is of particular advantage for complex applications such as the connection of a socalled cross-section transformer. This enables e.g. checks with regard to object size and automatic edge control.
FL 70 R
The FL 70 R version operates without a display and is a cheap alternative for standard applications. An easy teach-in function is common to all of the sensor versions. Teach-in is carried out at the touch of a key and external teach-in is possible via a teach cable. The keys can also be locked.
Product advantages
» High user comfort – Teach-in
» High level of accuracy
» High switching frequency
» No mutual interference thanks to automatic communication
» Mode of operation selectable (types R-..D and RA-..D)
» Assembly on DIN rails
» Robust IP 64 protection system
» Top quality price/performance ratio
|
|
Fiber units NF series
-You can find what you need from 200 fiber units line up
-Thru-beam, Retro-reflective and diffuse type
-Cost effective fiber units
-Heat resistant, Vacume resistant, Bending tolerant, Chemical resistant
-Beam array, Screen array
-Narrow beam, Fine spot beam type
-Sleeve type, Thread type
|
|
Optex FA Digital Fiber sensor D3RF series/ D2RF series
- Digital display for easy setup and easy monitoring
- Two independent output with
- High speed 16us (D3RF) / 60us (D2RF) response.
- Cross talk prevention up to 16 units (D3RF) / 4 units (D2RF)
- APC Function (D2RF, Auto Power Control):
The APC function ensures precise sensing even when there are changes in the temperature or environmental conditions.
** D3RF is now available **
|
|
|
|
|
|
These electronic devices, photoelectric sensors or photocells, use the light emission principle combined with the electronic and are made up
of an emitter or luminous source, the light rays of which are detected by a receiver. The variation in luminous signal, obtained when interrupting this ray, is converted into an electrical signal and is measured and used by
an electrical circuit. The light used is either infrared or red. By making use of this light various type of photoelectric sensors can be made. The AECO photoelectric sensors available in the FOTOSTAR range are the FT18M - FT18 -FTQ series in direct reflection, with reflector with polarized light and emitter-receiver versions. Due to their flexibility regarding the various
standard programmable versions these products offer the possibility of stocking reduction and are easily interchangeable with most of the units available on the market. They are used in the field of automation to check for the presence, counting, position control, etc., and they
are compatible with most logic programmers.
|
|
Qualified Sensors From Taiwan RiKO
FRC-310-35FA+FLM03 is a reflective coaxial fiber. A small spotlight made by the lens of FLM03 can be used to make precise positioning or to detect tiny objects. Its distance to focal point is 8 mm. It can be used to detect the mark on the printing paper, or the wafer is unseated in the index table. Minimum sensing object is diameter 0.3 mm.
Our products are compatible with many big brands.
Custom design is welcome.
|
|
RiKO FGR-67TG-20 Fiber Optic Sensor
Qualified Sensors From Taiwan RiKO
Fiber with hexagonal sensor head is easy to install and to save space. The strong fiber is covered with metal protective tube or with bend-resistant wire. As the angle of fiber is 90 degrees right angle, it is very easy to install. Especially to be used in a narrow space. Only use one nut, you can install it easily. Additionally, it can avoid the danger caused by revealed fiber and solve the problem to wind the revealed fiber.
|
|
MICRONOR optical products are based 100% on fiber optics. We make use of light in an innovative and elegant way to fulfill complex sensing requirements. These new sensors show themselves to be particularly advantageous and reliable under extremely tough and difficult environmental conditions. Areas of application such as in deep-drilling sites, wind generators, railway rolling stock, nuclear plants, aircraft braking systems and steelworks are where these products come into their own.
We offer two encoder versions and the appropriate analysis appliance:
|
|
|
Fiber Optic sensors, photo lens eliminated amplifier combined with fiber optic cable, are ideal where small objects detection and quick response time is required. Moreover, the high flexibility of the optic cable allows easy installation fitting almost anywhere. Autonics fiber optic sensing amplifiers and cables of real compact body offer sophisticated part detection, quick response time and generous sensing range.
|
|
General description :
Panasonic Electric Works Corporation of America is proud to introduce the brand new FX-100 Series from SUNX. Its ultra-slim design features a 9mm width and integrated mounting holes for installation in any application. The four chemical, visible red LED used for the emitter ensures long life operation and high-powered sensing.
This sensor incorporates a dual digital display for simple setup, along with automatic push-button teaching and external input capabilities. Advanced functions including threshold tracking, timers, LED attenuation, and interference prevention allow the FX-100 to compete with fiber optic units that are twice its price.
The connection options for the FX-100 series consist of an industry standard M8 quick disconnect along with an option that utilizes the same quick connect cable found in the SUNX DP-100 and PM series.
With list pricing starting at $75, the FX-100 series is primed to become the gold standard in fiber optic sensors.
|
|
FO Sensorcable:
with stainless steel loose tube for max. 4 fibers and stainless steel armoring.The cable is extremely robust, flexible, easy to deploy up to 300°C. It can be used as temperatur- vibration or acustic sensor.
|
|
|
Ocean Optics sensor systems are ushering in a new generation of low-cost, portable chemical-sensing devices. Thanks to innovation in the development of chemical-sensing complexes -- particularly those with fluorescing properties -- products such as our Oxygen Sensor systems will continue to provide viable alternatives to traditional chemical-sensing devices such as electrodes. The use of optical-sensing methods lessens the reliance on the electrochemical technologies that have dominated the field of oxygen sensing.
|
|
The state-of-the-art oxygen sensor getOtwo is based on the principle of fluorescence quenching. It is therefore possible to detect even extremely low oxygen concentrations.
Usual standard electrodes can be replaced due to getOtwo's shaft having an outer diameter of only 12mm.
Long tool life at minimized maintenance efforts guarantee low operating expenses at high measuring safety.
Applicable for
- water analysis
- beverage analysis
- concentration measurements, e.g. in slurries, oils ...
- monitoring of processes of oxidation
- fermentation monitoring
- monitoring of filling processes
|
|
Features:
- Patented TaperSlit™ flow cell - Ensures highest sensitivity while maintaining optimal spectral performance.
- Low noise performance - Updated electronics and uniquely designed optics ensures the best signal-to-noise performance (<10uAU) in the industry.
- Superior linearity - Allows for simultaneous quantification of high and low level components within a single chromatographic separation.
- Data Rates up to 80Hz - Flexible acquisition speeds for both normal and fast LC separations.
- PDA data processing - Powerful Empower 2 software conducts a vast array of complex calculations and charts for exceptional visual interpretation.
|
|
SmartScope CNC 1000
The SmartScope® CNC™ 1000 provides a large measurement volume through its moving gantry design. The instrument head traverses a rigid granite rail in the X axis, while the part moved in the Y axis. The entire unit is mounted on a granite base for maximum measurement stability.
Every SmartScope CNC 1000 is multisensor capable.
Whether your needs call for multisensor capabilities now or in the future, SmartScope CNC 1000 is up to the task. Its advanced design allows the additional precision of multiple sensors, including touch trigger probes, micro-probes, and laser scanners. Field retrofits are easily accomplished.
|
|
The LL series Liquid Level Sensor uses an optoschmitt trigger which provides a digital output that indicates the presence or absence of liquid. These components require user supplied external circuit protection.
The LLN series Industrial Liquid Level sensors are designed for harsh industrial environments with extremes in temperature, pressure, vibration, and shock. The LLN series are sealed to meet IP67 and have reverse polarity and overvoltage protection. Housed in stainless-steel, the LLN series has long life and is easy to clean. The LLN series terminates using industry standard Quick-connect connectors.
|
|
General Information
Intelligent analogue addressable optical smoke detector for use with JSB FX3302SS systems
approved to EN54 part 7.
Optical detectors are most responsive to large visible smoke particles and are best suited to slow burning or smouldering fires
Ideal for detecting smouldering fires
Easy to dismantle for on site cleaning
Dual LED'S for maximum viewability with minimum travel distance
Relay base available for local remote signalling
Specification
Brand: JSB
Dimensions (mm): Dia 103 x D33
Weight (KG): 0.1
ANA Number: 5021621236307
Cable Entry: Via separate base
IP Rating: IP20
Detector Type: Photo Electric
|
|
|
LumaSense's SF6 Leak Detector offers an unmatched combination of performance and convenience. Based on the company’s Photoacoustic Spectroscopy (PAS) technology, the system offers highly accurate, reliable and stable quantitative gas analysis and detection. The growing environmental requirements and pressures regarding the use of SF6 make LumaSense’s system a coveted tool designed for everyday use.
|
|
The LumaSense Photoacoustic Field Gas-Monitor Innova - 1412 is a highly accurate, reliable and stable quantitative gas monitor. Its measurement principle is based on the photoacoustic infra-red detection method. This means that the 1412 can measure almost any gas that absorbs infra-red light.
Appropriate optical filters (up to 5 + water vapor) are installed in the 1412's filter carousel so that it can selectively measure the concentration of up to 5 component gases and water vapor in any air sample. Further, the instrument can compensate for interference between the measured gases, using the unique Cross-compensation feature. The 1412's detection limit is gas-dependent but typically in the 10-² ppm region.
|
|
|
|
