|
|
|
|
|
|
Mat EM 1002 with densities of 100, 150, 225 g/m2 is manufactured from chopped strands made of glass fibre bound together with an emulsion binder and drawn from E glass containing less than 1% of alkalies. The diameter of filament is 9 µm. The mat has a reduced strand linear density (tex) and the surface weight (density) comparing to the standard emulsion mat. It is very soft and it sets very well in a mould taking perfectly its very complicated shapes. It is characterised by a medium wet-out rate in a non-saturated polyester resin and by a good ability to remove air in the process of lamination.
Application
Emulsion bound mat EM 1002 with surface weights of 100 g/m2,150 g/m2 225 g/m2 is suitable for making laminates in a contact process. It is used with all types of non-saturated polyester resins for manufacturing products reinforced with glass fibre. It suites especially for manufacturing gel coated products as their reinforcement. It is also particularly recommended as the external layer of laminate in case of products with improved aesthetics of the surface.
|
|
|
OC® Chopped Strand Mats consist of chopped glass fibers bonded together using either an emulsion binder or a polyester powder. The mats are designed to be compatible with unsaturated polyester, vinyl ester and a variety of other resins. OC®Chopped Strand Mats are used as gel-coat backups and standard laminate reinforcements for most contact molding (hand lay-up) applications, including boats, surfboards, panels, tanks and other diverse applications. Their many excellent product characteristics have been used to provide superior performance in a broad range of end-use markets such as marine, transportation, recreation, construction, consumer and anti-corrosion
|
|
|
OC® Continuous Filament Mats are continuous glass fiber, non-woven mats containing an insoluble binder for unsaturated polyester and polyurethane resin compatibility in unfilled or filled resin systems. OC® Continuous Filament Mats are particularly suitable for compression molded electrical and non-electrical laminates, as well as for use in pultrusion processes.
|
|
|
|
|
|
CFM is made from continuous fiberglass strands randomly looped and bonded together with a minimal binder that is compatible with a variety of unfilled or filled resin systems including PE/PV, PE/PU, Phenolic, PU, PU/Epoxy.
Key Features:
* Roll Slitting - mat rolls can be easily slit into various widths.
* Wet-Through/Porosity - offers little resistance to resin flow to allow for easy and complete resin impregnation, resulting in high line speeds.
* Excellent Wet-Out - improves the ability to coat individual glass filaments and strands.
* Mat Strength - resists being pulled apart under tension during impregnation and molding.
* Manageable - can be unrolled, cut and conveyed to the mold or die without losing its integrity.
Applications:
CFM is used in many FRP applications such as pultrusion, high pressure laminating, vacuum infusion, and several fiberglass-molding processes (SRIM/RTM, etc.). It is particularly suitable for compression molded electrical and non-electrical laminates. Pultruded shapes made with AGY CFM have outstanding transverse- and random-direction strength. Typical applications include electrical flat sheet, grading and railings, window frames, boat hulls and transoms, cooling tower structural shapes and ladder rails.
|
|
| ... products without technical information |
| |
Shake-out grids are machines using predominantly vertical vibration to separate castings and sand / sand lumps. They are predominantly used for large piece weights and low quantities.
The material is charged by crane. After the process the de-sanded castings are removed by crane. With this facility the sand shaken out is recycled in a downstream treatment plant and returned.
Features:
- High wear-resistance
- Rugged design
- Low overall height
- Long service life
Benefits:
- Low operating costs
- Small footprint
- High operational reliability
- Long service life
- Good value for money
|
|
SHAKE-OUTS
Shake-out units, sand cooling plants
|
|
6 x 3m shakeout deck with 50 tonne capacity.
Dust enclosure for shakeout with powered doors and roof access for crane.
|
|
Sand reclamation plants
Design and construction of plants for the reclamation of sand bonded with phenolic-furanic and alkaline resins, alphaset or silicate, capacity: 1 - 30 t/h
|
|
Continuous Shake-out Variocast
In a modern foundry flexibility is now paramount.
The Variocast range of riser removers which have variable angle of incidence and speed are the latest innovation in this sector.
This machine can electronically adapt to the widest range of production plans. With a choice of over 100 programs to follow, it is capable of improving the quality of the product and the profitability of the plant.
|
|
DENSORB Sorbents
High-performance absorption materials for containing and effectively absorbing leaking liquids.
Avoid unnecessary costs and effort!
Larger accidents are not always the most dangerous.
Small leakages can also endanger the environment and compromise safety in the workplace thus posing a hazard to the workforce. Avoid high costs for clearing debris, cleaning up and waste disposal, protect
yourself with DENSORB binding materials.
Spill kits in many different sizes suitable for all emergency situations imaginable and
wide range of absorbent rolls, mats, cushions, snakes, barrel cover, oil barriers, granules and practical accessories.
|
|
3M Nomad Basic Entry Mats
The right mats for your entranceway are rarely top of mind when you're managing a busy restaurant, café, bar, shop or office. But it's where you can make a good first impression and even save on cleaning and maintenance costs.
In contrast, buying 3M Nomad Basic Entry Mats gives you the reassurance of owning brand-new, fit-for-purpose, durable matting that can last for months*.
Easy to install, handle and discard, 3M Nomad Basic Entry Mats are discreet, hassle-free and cost-efficient.
|
|
Traffic Mat
Highly absorbent walkway protection, suitable for any surface type and employed in the prevention of dangerous liquid spills and dispersions (acids, chemicals, oil etc. ). Formed by a layer of absorbing material plus a layer of external reinforce in non-woven material which lengthens its resistance. Ideal for frequently-used walkways situated around machinery where maximum safety is required.
|
|
For non-flammable petroleum spills, use PIG® Oil-Only Rolls.
Sometimes you simply need a mat to last longer and absorb more. With a super-thick bottom and super-tough top, FAT MAT™ Rolls are perfect for hard-to-reach areas, wet walkways, big cleanups or any other job requiring long life and high capacity!
|
|
HIGH VISIBILITY COVERS FOR MHEOLES
THE ONLY FULL SATURATION OIL BINDER POWDER
The manhole security cover is used to prevent seepages
- Easy to use in case of emergency; it must be just laid down on the manhole
- Made of valuable polymers, hard-wearing and flexible, it adheres perfectly to grounds which are uneven, nubby and cracked.
- Resistant to water, hydrocarbons and to the most aggressive chemicals.
- The cover is practically eternal: after the use it must be only washed before it is ready to be used again.
- Available in 6 different sizes
|
|
Grid magnet for bulk materials
Permanently magnetic grid magnets can be supplied in circular, rectangular or square format and are therefore universally applicable. Ferrous particles are filtered out from bulk material as they pass through the magnetic grid.
Advantages
Powerful magnets remove even low magnetised stainless steel particles from the product flow.
|
|
|
Magnetic grid. It is a group of magnetic tubes placed parallel forming bars through which the material to be debugged should pass. The magnetic bars can be single, double, etc, round or square shaped, according to the duct where it must be installed.
|
|
| ... products without technical information |
| |
The aphonic grid is made from sound-absorbing fins in galvanized steel
V shaped. The grid is supplied with anti-rain profiles and one inner
protection grid. Optionally the grids are available in stainless steel or
aluminum. more frequent using is silencing of air treatment units of
evaporative towers, boiler rooms, etc.
Insulation indexes
AKR 300 = Rw 18
AKR 500 = Rw 21
|
|
| ... products without technical information |
| |
Magnetic separator for conveying lines.
The PneuMag is a high intensity magnetic separator designed to remove ferrous and stainless steel scrapings from pneumatic conveying lines operating at up to 25m/s.
It features a centrally positioned high intensity magnetic grid with quick release toggle clamps, tamper proof cover plate and totally stainless steel construction.
The PneuMag is particularly suited to flour, sugar and other powder and granulate processing.
High magnetic performance - 9000 Gauss
Reduces 'spark' risk
316 grade stainless steel construction
Cleaned in under 30 seconds
Tamper proof guard
Silicon rubber, metal detectable seal
|
|
Ensure the protection of your personnel and to perennialize your equipment.
Applications: Range of protection and accessories perfectly adapted to the Platforms.
+ PRODUCED: Reliability: material designed in accordance with the recommendations of the INRS, the security standard and factory inspectorate sets fire to.
Safety: protection of your equipment and your personnel, prevention of any fall of your products.
Railing: The railings are manufactured out of tube of section 35x35 Misters standardized Hauteur of 1100 mm, including/understanding smooth, under stringer and plinth.
Standard safety fence LOCKS: Only system recognized by the CRAM, the barrier lock is planned for the installation and in full safety deposits pallets by the lifting truck. Manufacture out of square and round tubes. Yellow completion epoxy painting.
|
|
Tack welded tubular structure. Platform covered with sheet metal with or without retention, with galvanized non-skid steel decking hot; Fixed or dismountable platform; Feet with paste of fixing on the ground. FRENCH MANUFACTURE
MANERGO proposes to you a whole range of platforms to your measurements, being able to answer all kinds of application. All our platforms answer the security standards in force.
|
|
PLATFORM ISOPLAN: THE PLATFORM WITH THE 3 PATENTS
CAPITALS
N°1 patent: Key point of the concept, the capital ensures the connection between the beams and the posts. The capital is resting against the post and is blocked by two keys. This process without welding makes it possible to transmit the efforts to more close to neutral fiber and on the angles of the posts. The definition of load is controlled perfectly thanks to the theoretical calculations confirmed by the tests.
AUTOCONNECTS
N°2 patent: Autoconnect allows the combination of 24 technical profiles high strength, the optimization of the combination by the data-processing calculation of each project gives the ideal solution (48 possibilities)
2 bolts ensure an exceptional reliability.
ANTIDEVERSEMENT
N°3 patent: Patented system of stabilization of the long beams carried up to 9 meters. Its need is determined by the software: safety and optimization are obtained by data processing.
|
|
|
|
|
|
The device covers wide wavelength ranges and provides simultaneous measurements at very fast response rates and excellent wavelength resolution. High reliability (MIL STD 810E shock and vibration) is achieved through a rugged mechanical design with no moving parts. Periodic calibration is not required. Input/Output (I/O) is provided through a dual port RAM interface accessed through ADD/DAT bus direct connection or serial (RS232 or USB) communications
The WaveCaptureTM FBGA Series employs a highly efficient Volume Phase Grating (VPG®) as the spectral dispersion element and an ultra sensitive InGaAs array detector as the detection element, thereby providing high-speed parallel processing and continuous spectrum measurements. As an input, the device uses a tapped signal from the main data transmission link through a single mode fiber, then collimating it with a micro lens. The signal is spectrally dispersed with the VPG®, and the diffracted field is focused onto an InGaAs array detector. The control electronics read out the processed digital signal to extract required information. Both the raw data and the processed data are available to the host.
Key Features
- +/- 30pm EOL wavelength accuracy (see FBGA-IRS for higher wavelength accuracy)
- Excellent wavelength stability
- Athermal design enabling battery-operated portable operation
- Frequency response up to 5kHz
- Wide scanning range
- High dynamic range - 50 dB
- Hermetically sealed for use in harsh environment
- MIL STD 810F qualified
- Compact, card-mountable design
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
|
|
see the results for the following category : 
