|
|
Basic units to sophisticated systems
Bulk bag filler configurations
Flexicon bulk bag fillers (also known as FIBC fillers) are offered in three configurations, each of which is engineered to deliver optimum performance across specific capacity ranges with maximum cost-effectiveness.
Flexicon's patented TWIN-CENTERPOSTTM filler, satisfies low- to medium-capacity filling requirements and/or sanitary applications where frequent wash-down or compliance with USDA Dairy standards is required.
Flexicon's latest bulk bag filling innovation is the patent-pending SWING-DOWNTM filler. Designed for medium- to high-capacity applications, this revolutionary design brings the fill head to the operator at floor level for faster, safer and easier bag connections.
REAR-POST fillers are intended for medium- to high-capacity applications requiring pass-through conveyors and, or powered fill head height adjustment.
Each of these designs satisfies a distinct range of bulk bag filling applications, and is available with performance enhancements to meet your individual requirements with extreme cost effectiveness. From basic, low-cost fillers to automated, high-capacity systems and everything in between, Flexicon offers precisely what you need for bulk bag filling success.
Basic units to fully automated, high capacity, feeder/filler systems
For fast, accurate, and stable weigh-filling of small to large volumes of free- and non-free-flowing bulk materials, Flexicon bulk bag fillers are offered in two configurations: with load cells which measure weight gain of the bulk bag filler (three photos at right), and with weigh hoppers suspended above the bag filler (illustration at bottom) allowing simultaneous recharging of the hopper and replacement of the bulk bag to achieve high filling rates.
|
|
Filldose
Manual or automatic filling of powdered products from 5 to 50 Kgs in barrels, bags or bag - in - box.
BENEFITS
* Accurate and controlled weighting
* Staff and environment safety thanks to the anti-dust box ( option )
* Reduced cleaning and easy dismantling
* Possibility of gas flushing ( option )
|
|
Metalfab Bulk Bag Filling Stands and Systems are engineered to provide a safe, reliable, and dust free means to fill lined, reusable, and disposable (one way) bags with a wide variety of powders and other difficult to handle dry bulk materials.
The basic cantilever filling stand allows loading from three sides and includes a 60" x 60"diamond plate bag support surface with 5,000 lb. capacity, adjustable bag holding frame fabricated from 3" structural tubing, fixed position bag holding hooks, and frame mounted inflatable bag seal for dust free filling. The main support posts and bag clamp bars are predrilled at 2"intervals to allow adjustment of the frame to accommodate bags from 36-85" in height. All material contact surfaces are 304 stainless steel.
Metalfab can also provide a completely integrated turnkey package inclusive of the stand, a choice of weighing options, feeding systems, cutoff valves, digital control instrumentation for direct connection to a PLC or DCS, and motorized conveyor sections to remove filled bags from the bulk bag or bulk container filling stand.
|
|
This range of bagging machines make it possible to bag granulated or powdered products in the ready-made open-mouth bags.
A range of metering-weighing devices installed upstream prepares the doses before filling (net weight).
Bags of between 5 and 50 kg can be processed with or without gussets.
Upstream, different bag closing systems are available: stitching, folding stitching, removal of crepe tab, folding and gluing, welding.
|
|
KVM: Bag Filling and Closure Machine
For Packaging Of Products With Advertising Appeal.
Top-Closing Machine KVM 10 with customer-specific bag head shaping modules.
Highest Flexibility:
At a set performance of 80 bags/min., various types of top closure can be manufactured:
simple sealed top seam
180° folded top seam, closed
bag closed by clip
peel seam closure
label closure
|
|
The PACK 50 is the ideal packer for anyone wishing to achieve medium outputs.
The machine can reach a maximum packing speed of 48 bags per minute and with the additional size changeover parts, bag sizes from 500 grams to 2.5 kg (depending on product bulk density) can be packed.
The machine can be fitted with either the auger doser model DVC (for powder products), and/or the cups doser model DVT (for granular products), or with an electronic weigher for handling special products
|
|
|
Arodo manufacture different types of big-bag filling systems. Think of mobile systems which can be added to a sack filling system where big bags are filled according to the “multi-dump” principle. Also filling systems with an own dosing and weighing device are part of the delivery program.
|
|
Gross weighing system
This system is suitable for sticky products. The gross weighing principle makes it possible to weigh the product directly into the sack. It can also be used in locations where height is insufficient. Subject to the construction the capacity is 100 up to 300 sacks per hour.
|
|
|
This system is suitable for non-sticky products. The net weighing principle makes it also possible to fill big-bags according to the “multi-dump” principle. Subject to the construction the capacity is 400 up to 1400 sacks per hour.
|
|
Universal Sorting and Equalizing System
The UES is a product routing system as an extension to an automatic price labeler. It intelligently compiles batches, boxes or bags with a standardized fixed weight from a choice of products with weight tolerances. Therefore, the UES helps to optimize product usage of food, non-food, fresh and frozen products. The import of the product weights through a standardized data interface from a price labeler saves an additional weighing process.
- Reduces/saves up to 75% of give away depending on product
- Comes in standard design with 4, 6, 8, 10 or 12 channels, but also various options for special production environments available
- Different designs and constructions of the channels to fit various product classes
- Special design for instant filling of bags or various containers optional, as well as release to transport -belt or -roll systems
- Integration in robot systems possible
- Packing table for outer cases
- Working with labeled and wrapped or foiled products
- Compact and space-saving design
- Easy-use and intuitive 10,4“ TFT colour display with softkey controls
- Clearly arranged display symbols, easy-to-capture production data
- Detailed statistical information and functions, including breaks and downtimes
- Allows for additional processes like sorting, equalizing, calibrating and counting, also in simultaneous mode
„The investment into an equalizing system made instant product savings possible and had a short-term payback time“
|
|
Application : Cement and Powdered material
Available in Single Spout model
Auto-weighing system with bag pushing system
Pre-assembled with solenoid valve, limit switch etc.
Sub-divided in to Heavy duty Air Compressor
Capacity : 3 - 10 ton per hour
|
|
|
Particularly selected for certain filling materials owing to flow-mechanical properties, valve-sack filling-machines are manufactured by Möllers in further worldwide proven configurations. The machines, constructed as single packers, are used to achieve higher filling capacities but also in in-line configurations with a common filling material feed and empty-sack feed via a common sack applicator.
|
|
Möllers Rotary Impeller Packers fill fine to the finest materials in valve-sacks with high filling capacities. They are composed of the rotary packing silo and attached filling-modules with horizontal filling-impeller, filling valve, filling spout, attached bag rest in DMS load cells and weighing electronics.
Main advantages:
• Horizontal rotary filling impeller = low energy consumption, low wear
• Compact construction, low space required
• Rotronik®-packer control = central control and monitoring of all filling modules, automatic filling-weight correction, rapid product change
|
|
| ... products without technical information |
| |
|
|