|
|
Universal Sorting and Equalizing System
The UES is a product routing system as an extension to an automatic price labeler. It intelligently compiles batches, boxes or bags with a standardized fixed weight from a choice of products with weight tolerances. Therefore, the UES helps to optimize product usage of food, non-food, fresh and frozen products. The import of the product weights through a standardized data interface from a price labeler saves an additional weighing process.
- Reduces/saves up to 75% of give away depending on product
- Comes in standard design with 4, 6, 8, 10 or 12 channels, but also various options for special production environments available
- Different designs and constructions of the channels to fit various product classes
- Special design for instant filling of bags or various containers optional, as well as release to transport -belt or -roll systems
- Integration in robot systems possible
- Packing table for outer cases
- Working with labeled and wrapped or foiled products
- Compact and space-saving design
- Easy-use and intuitive 10,4“ TFT colour display with softkey controls
- Clearly arranged display symbols, easy-to-capture production data
- Detailed statistical information and functions, including breaks and downtimes
- Allows for additional processes like sorting, equalizing, calibrating and counting, also in simultaneous mode
„The investment into an equalizing system made instant product savings possible and had a short-term payback time“
|
|
| ... products without technical information |
| |
Dryer desiccator cabinet KW.86/AV Series.
Internal chamber and shelves are in stainless steel; external cabinet in brushed AISI 0 stainless steel sheet and equipped with split opening door with sealing. Heating is achieved with specific air heaters; discharge of steam inside the chamber occurs by means of centrifugal electroaspirator with 0 m³/h flow rate.
The electrical system is provided with general switch and running light signal. Thermal stability is obtained through PID digital electronic μP regulator (with RTD Pt100 OHM input); it is paired with specific SSR, suited to absorbing load of heaters. In addition, each appliance is equipped with aerators and adjustable supports for shelving.
|
|
|
The new STERIDIUM range of drying cabinets has been engineered using the finest quality stainless steel, and is ideal for many different functions across a variety of industries; including anaesthetic tube drying, glassware drying, instrument drying and soil dehydration.
|
|
Drying locker for professional clothes. Closing by handle 1/4 of turn. To pose on the ground on feet jacks. Multiple punching of the lower part of the cell. Capacity from 2 to 3 complete equipments of work. Different specific models
230 V - 1100 Watts
|
|
|
Cupboard of drying. Manual or automatic Démarage. Drying with hot air with system of recycling of the air. Cleansing by ozone generator. Capacity from 30 to 70 pairs. Drying of the shoes or the gas masks. Time of drying: between 15 min and 2H00. Exist of them 30, 50 and 70 pairs. Stainless apparatus.
|
|
| ... products without technical information |
| |
This line of slew drive reduction gears, from 500 to 1700 daNm, is ideal for applications on crane trucks, excavators, harbour cranes, and so on.
The main features are the output support in steel and a sturdy pinion integral with the shaft, suitable for any type of thrust bearing.
|
|
|
Gearboxes complete with reinforced output supports, integral pinion, static negative disc brake and input coupling for hydraulic motors; nominal output torques range from 4.100 Nm to 60.000 Nm.
|
|
PIV Drives has developed this range of rack and pinion drives for closing the mould of injection molding machines. This type of drive features quiet running spur gear reduction and presents a compact construction with an integrated motor. The POSIRACK design has a double-toothed rack output. Case hardened and ground gear wheels are the base for this high performance drive, with the industry’s best accelerating and decelerating torque and an extremely quiet package.
Technical Data:
Rack clamping force: up to 450 kN
Rack speed: > 2,000 mm/s
|
|
|
Rack & pinion jacks load 1,5 t to 10 t (fig.) withself-locking security crank, keeps the charge in every required position - for pulling or pushings. Special versions on request: - different length of rack - different lift - drive shaft to connect several jacks - with internal brake and removable crank
|
|
Rack & pinion jacks load 0,5 t and 1 t, with self-locking worm gear for lifting, for lowering, adjusting and fixing of mechanical components, devices, machines, etc.. 0,5 t version also available in stainless steel
robust version with milled rack and hardened driving parts, for in- and outdoor applications
Special versions against additional charge:
- an other lift or length
- an other crank version
- an other fixing possibility
- an other surface treatment
|
|
The steel jack is standard equipment for tool and machinery shops, contractors, shipyards, agriculture and workshops:
our steel jack with fixed lifting claw can be delivered with different types of hand crank for lifting the jack shaft along the rack. It offers a very long service life due to its high quality spur gear, precise worked crank gear as well as additional worked pawl.
|
|
| ... products without technical information |
| |
|
Rack & pinion jacks load 1,5 t to 10 t (fig.) withself-locking security crank, keeps the charge in every required position - for pulling or pushings. Special versions on request: - different length of rack - different lift - drive shaft to connect several jacks - with internal brake and removable crank
|
|
Rack & pinion jacks load 0,5 t and 1 t, with self-locking worm gear for lifting, for lowering, adjusting and fixing of mechanical components, devices, machines, etc.. 0,5 t version also available in stainless steel
robust version with milled rack and hardened driving parts, for in- and outdoor applications
Special versions against additional charge:
- an other lift or length
- an other crank version
- an other fixing possibility
- an other surface treatment
|
|
The steel jack is standard equipment for tool and machinery shops, contractors, shipyards, agriculture and workshops:
our steel jack with fixed lifting claw can be delivered with different types of hand crank for lifting the jack shaft along the rack. It offers a very long service life due to its high quality spur gear, precise worked crank gear as well as additional worked pawl.
|
|
| ... products without technical information |
| |
Videojet P3400 Label Printer Applicator
The Videojet P3400 label printer applicator is easy to use and maintain, and features the versatility of modular spares to deliver maximum uptime and performance. Available with multiple printer options and a variety of application choices, the Videojet P3400 provides a customizable, off the shelf solution.
Simple, modular design
RFID Enabled
High quality thermal transfer printing
Built to last in the most rugged industrial environments
User configured beacon and status output
Multiple label configuration menu
Flight time compensation for automatic label placement control
Ethernet connectivity for set-up and control
*THIS ITEM IS CURRENTLY AVAILABLE ONLY IN NORTH AMERICA
|
|
* Ij3000 XLS Controller :
The Ij3000 XLS Controller was designed and built to meet any demanding coding application. Diagraph has engineered the XLS Controller to exceed performance expectations. The XLS Controller seamlessly integrates Impulse Jet and Integrated Valve technology offering a networking function that delivers reliable, high quality printing to any automated production enviroment.
* Ij3000 ES Controller :
The Ij3000 ES Controller is a powerful, low-cost web-server based HMI features a color touchscreen display, drives Diagraph’s Integrated Valve or Impulse Jet printheads, and has a 100-base T Ethernet network port for web browser, network connectivity. Diagraph has created special package “Ij3000 ES kits” for dual head Integrated Valve 9 or 18 dot printhead applications and has special introductory offer. Interested parties should call 800-722-1125 for details.
* NEW! IV-18 Dot Printhead for IJ3000 Ink Jet System
Diagraph is pleased to introduce the IV18-Dot Printhead for the Ij3000 Integrated Valve Large Character Ink Jet System. Key Standard Features Include: Two-piece, die-cast aluminum housing, environmentally sealed printhead for harsh environments, robust metal housing over entire printhead, built-in LED display and membrane switch for: -->channel purge (one or all channels) -->electronic pulse width (dot size) adjustment -->pressure gauge, automatic first dot correction, overdrive protection, photocell mounting bracket holes, backwards compatibility with existing Ij3000 and Series 1 printheads. The IV-18 Dot Printhead is driven by Diagraph’s Ij3000 Ink Jet Printing System.
|
|
Real time labels Print & Apply System for labelling dynamic processes. It has been developed to satisfy awide range of labelling needs in boxes, packs, sets and sacks.Easily adapts when various fields label printing and applicationis needed in half speed situations.
The print and apply kit can be adjusted for perfect applicationsin any direction and position: Top and Sides. Application distance depends on production line characteristics and application placeas well as on the type of pack to be labelled. Its working speeddepends on label size reaching up to 45 labels/minute.
|
|
Unit designed and produced by United Barcode Systems as a real time labels Print & Apply System for two side corner box. Perfect for labelling corner solutions.
Solid system made for industrial environments. Its base height is regulating in order to adapt all kind of production and packaging lines and uses synchronisation and alarm signals.
Its working speeddepends on label size reaching up to 45 labels/minute.The APL-2000 can be connected to any computer system;Windows NT, UNIX, AS/400, PC, etc... and ERP environments.
|
|
|
|
see the results for the following category
