|
|
The Series 6300 filter provides the reliability of Mott precision porous metal media in a compact inline configuration. The filter element is made up of seven porous cups, which substantially increases the area over traditional designs, and increases on-stream filter life. The filter surface area is 10 square inches.
Filter specifications.
Materials of construction: 316L stainless steel porous media, 316 stainless steel housing, seal material as specified.
Maximum operating pressure: 2000 psi.
Maximum differential pressure: 500 psi.
1/8" - 27 NPT inline inlet and outlet connections.
Filter area: 10 in2.
Filter element 100% leak tested to bubble point.
|
|
TYPICAL APPLICATIONS
EFS
Standard size housings available with 30 (590), 60 (250), 100 (149), and 150 (99) mesh (micron) reusable, stainless steel filter cartridges. Units measure 11.25" long and feature a 1" NPT intake and dual 1" NPT discharge ports (3/4" reducers provided).
FEATURES
Graymills Superflo filters are designed to overcome the typical pressure drop and reduced flow due to clogging that occurs with ordinary filters. A permanent magnet suspended over the intake port traps ferrous particles which find their way into the fluid, and diffuses the flow outward into the filter screen flutes. Filtered material is trapped on the inside of the removable/reusable stainless steel filter cartridge. To clean, just remove the cartridge. All the contaminants come out with it. Self draining. No wasted fluid or messy leftovers to deal with. Stainless steel filter cartridges are available in four different mesh screens.
|
|
KE is a side beam filter press with reduced dimensions, suitable to be installed even in very small spaces. Thanks to its solid structure and simple design, this type of filter is an extremely functional machine.
KE filter presses, exactly like the other bigger machines manufactured by DIEMME, have been designed to also work at high feed pressure values: 12,15, and 30 bar.
|
|
DIEMME Filtration develops special customised designs of mobile filtration plants with filter presses, in order to meet any customer's requirements.
The advantages of DIEMME mobile filtration units:
- Compact
- Complete plants for all applications
- Easy personnel access to the plant, for both operation and maintenance
- Capable of wide range of applications with the employment of different
sludge conditioning methods
|
|
High performance solid/liquid filter separation technology.
Drum filters are the most frequently used continuous rotary filters and are found in many different applications due to their simplicity and ease of operation.
Applications include solid/liquid separation processes in the chemical industry, plastics production, mineral refining, food processing industry and in the field of environmental protection.
Whether you require a vacuum, gas-tight or pressure filter, we have the right design to suit your specific requirements.
Our rotary drum filter offers a number of separation process advantages:
- Increased filtration capacity through improved hydraulic efficiency.
- Low operating costs through maintenance friendly design.
- Enhanced performance with gas-tight, pressurized configuration.
Main Applications:
Plastic intermediates, BPA, carbonates, cellulose, pigments, iron oxide, indigo, TiO2, red mud.
|
|
|
|
|
|
BONO ARTES developed a innovative solution that matches gravity filtration with self-cleaning operation. The result is a very simple unit with high filtration efficiency and low installation costs that is particularly suitable for cooling water filtration where very large capacities are concerned.
Filtration of raw water is operated by gravity. The operating principle is the hydrostatic level of the water up to the sand layer. The unit is provided with three chambers: one contains the filtration media, one filtered water and another is used for the separation between the filling media and the clarified water storage. Filtered water here contained is used to backwash the filter when the pressure drop reaches the set-point value. Unlike pressure-operated filters requiring pumps and blowers, backwashing is done by gravity and no rotating machinery, spare parts and control equipment (automatic valves, flow-meter, regulating instruments, control panels etc.) are required . Moreover the filter is operated without any supervising personnel.
The benefits of such applications lay in the efficient filtration process, very low operating costs and the advantage of being able to treat large flows of water.
|
|
|
These Vickers suction strainers protect hydraulic pumps and control systems from solid contaminants. They should be used as immersion suction strainers on pump inlet lines.
|
|
DRY FILTERS
Simple and practical in design, they prevent impurities getting inside the vacuum pumps or generators
Available with stainless steel cartridges of 44 - 100 micron or in treated paper from 5 - 7 micron
They ensure volumetric capacities from 5 to 300 m3/h
OIL BATH FILTERS
Designed to protect pumps from fine and invisible dust
They partially eliminate possible harmful gasses produced during use
SIPHON FILTERS
Designed for the retention of fluids produced during use.
Their transparency, easy maintenance, and tough material construction ensure the reliability of the vacuum pump.
|
|
Plenty's ability and extensive experience in designing and building fabricated Duplex assemblies enhance the range of cast Duplex Strainers.
These have been used on gas services, high-pressure applications or for sizes and flow-rates beyond the capacity of the cast Duplex ranges.
** Where changeover without interruption of the flow is important, Plenty Process Filtration can design and manufacture Fabricated Duplex Assemblies to meet your specific requirements.
Units can be skid mounted or free-standing.
Manual or electrically operated changeover can be provided dependant upon the application.
Materials include Carbon Steel, Stainless Steel and Special Alloys.
|
|
ME is a lateral beam filter press, extremely versatile, which can be customized in function of the applicative process and clients' needs. The filter press ME is full automatic, with short cycles and minimum idle times. Thanks to the simultaneous opening system of the plates pack the cake's release is the extremely quick. ME series offers both big and small models. The latter ones are the smallest filters in the world equipped with an integral automation.
|
|
FPS food and beverage grade cartridges have been designed to comply with all FDA requirements for the food industry. Polyethersulfone is low protein binding and therefore a good choice for fermented beverage filtrations. FPS cartridges are flushed with 17+ megohm-cm water to ensure that no manufacturing debris remains downstream to contaminate your product. This washing also ensures that all extractables which may effect the taste of the product are removed. Cartridges are designed to give maximum throughput and handle cleaning and sanitization protocols well. Each cartridge module is individually tested to ensure integrity and is absolute at the rated pore size.
|
|
|
|
|
|
Star Filters' unique blend of assembly line and custom fabrication allows us to design and build the Star Filter Press exactly suited to the customer's specific needs, at a cost much lower than one would expect to pay for custom fabrication. Star Filter Presses can be fabricated in a variety of metals including carbon steel, monel, aluminum, and other special alloys upon request.
Star Compact Polishing Filter
• Portable, four-wheel, locking-caster design
• Six 47cm precision-machined and internally ported plates for optimum sealing
• 1-1/2” tri-clamp connections
• Large usable filtration area: 405 more per plate than a 40cm design
• 304 stainless steel construction with polypropylene plates
• Small footprint: 24” long x 21” wide x 30” high
• 0.5 µm pads furnished standard
• Expandable to 25-plate design
Star DE Filter
• 304 stainless steel construction with polypropylene plates
• Ten 1-1/2” thick DE plates
• Full 1.7 ft3 of sludge capacity
• 20-1/2 ft2 of filtration area
• Expandable to a 20-plate design
Star Combination Filter
• Integral crossover plate facilitates two-stage filtration
• 304 stainless steel construction with polypropylene plates
• Ten 1-1/2” thick DE plates
• Mix and match plates for specific product needs
|
|
Activated Carbon Water Filter FR
Fiber Glass Reinforced Plastic (FGRP) composite vessels are 1/3 the weight of carbon steel, strengths are directly comparable to steel, no maintenance & high aesthetic appearance.
• High performance Composite material
• Thermoplastic liner of polyester – wall thickness 3.8 mm to 7.6 mm as per vessel diameter
• 100 % corrosion resistant
• Excellent bonding between inlet & PE liner
• Better curing at high temperature
• 200 mm to 1,000 mm diameter
• All are top opening & dia 450 mm onwards top & bottom opening
• 450 mm onward flange fitting
• Operating Pressure – 10.5 kgf/cm2
• Operating temperature – 490 C
• 250,000 times cycle test from 10 psi to 150 psi
• Vessels are NSF & PED certified
|
|
|
Carbon treatment filtration systems are designed to carbon treat and filter bright nickel, acid copper, tin and zinc, ferrous chloride, copper pyrophosphate, cyanide copper, zinc, cadmium and silver, lead-tin fluoborate and most other plating solutions.
|
|
This water filtration equipment is recommended for the removal of unpleasant tastes and odors, dechlorination, or organic contaminant adsorption. Depending upon the exact application a variety of carbon types can be used.
ADVANTAGES:
- Materials and Coatings Selected to Withstand Corrosive Environments
- Reliable, Low Restriction Valves
- Distributors Allow Operation Over Wide Flow Rate Range
- Standard Designs Reduce Cost and Delivery Time
- Simple Operation Reduces Operator Training Requirements
- Efficient Adsorption Tailored For Each Applications
|
|
The Electric H2O Closed Loop Filtration System (CL Filter) is a high-pressure media filter, constructed from epoxy-lined carbon steel and designed to remove suspended solids down to 10, 5 and 0.5 microns from closed loop heating and cooling systems. The system is designed to maximize filtration flow and minimize backwash time and volume. As the filtered particulates accumulate on the media bed, the pressure differential across the bed increases. When a pre-determined set point is reached, the self-cleaning automatic citywater backwash cycle is initiated, after which filtration is resumed. The NEMA 4X control panel also incorporates a manual and timed override automatic backwash. Dual electric
actuators and four two-way bronze ball valves prevent any closed loop system water loss during backwash
|
|
|
The F400 automatic backflush filter is a reliable automatic filter for continuous and reliable operation. It operates according to the principle of flow reversal due to pressure drops.
|
|
|
|
|
|
Backwashing Pressure
Filter System
The innovative Eaton (Ronningen-Petter) AFR-Series
high-flow filtration of water-like liquids, at
meter footprint. A single AFR-Series equals the
performance of an in-line filter in only one-fifth the
floor space.
AFR-Series minimizes the number of moving parts for
low-cost operation and a long service life. A single
rotating flow diverter replaces multiple valves, actuators,
linkages and seals required by other systems.
Like many Eaton (Ronningen-Petter) filters, AFR-Series
uses cleanable media. This core design philosophy
further reduces life-cycle costs and maximizes productivity
in your plant by eliminating labor and disposal
costs as well as lost production associated with bags
and cartridges. Key benefits of AFR-Series include:
- Single system flow rates up to 2,000 gpm (454
m3/hr) with flexibility to meet current and future
system capacity demands
- A broad selection of filter media materials and
retentions suitable for a wide range of applications
- Automatic backwashing for operator-free service
and minimal backwash effluent (<2% of system
volume)
- Isolated top-to-bottom backwash flow ensures
complete and efficient media cleaning while
continuing to deliver filtered product downstream
- Available ACCUFLUX™ media dramatically
increases filter surface area for even higher
capacity in the same footprint
- Available with larger filter bodies to handle
higher flow and loading rates
|
|
Flow rates 10 - 100 l/unit
Purity attainable < 5 micron
Current sizes available:
T-RSF 10 10 l/min
T-RSF 30 30 l/min
T-RSF 100 100 l/min
|
|
|
|
|
|
Simplex Bag Filters PVC / CPVC
Simplex Bag Filters PPL / PVDF
Duplex Bag Filters
Filter Bags
Accept Most Standard Filter Bags:
For application versatility these all plastic housings will accept most standard 7" diameter filter bags. The single length vessel uses Size 01 bags, 7" x 16", while the double length vessel uses Size 02 bags, 7" x 32". This permits the vessel to be used with thousands of different types of filter bags to exactly match the applications requirements. With a Hayward PVC or CPVC bag filter you are not limited to just a few "non-standard" size filter bags.
Advanced Design:
This all plastic housing is designed to stand up to the most demanding industrial and commercial applications around. Rugged, thick wall construction ensures years of trouble free service and the housing is rated at a full 150 PSI. The built-in true union piping and drain connections makes installation and operation quick and easy. With this feature the filter housing can be removed from the piping system without having to break down the piping system. Just unscrew the assembly nut and remove the connecting pipe. The integral mounting base also makes for an easy installation and eliminates the need for extra cost support legs. The housing has two bottom outlet connections so that either can be used as a drain connection. This makes possible both in-line or loop piping installations. The one-piece, corrosion resistant plastic body has an extremely smooth interior surface that is very easy to clean. The housing comes standard with a plastic cover vent valve.
Easy Bag Change:
The hand-removable, no tools required, spin-off cover makes filter bag changing quick and easy. There are no swing bolts to deal with as on a metal filter housing. Just a few turns of the built in 15" cover handle opens and closes the housing with little effort.
Corrosion is Never a Problem:
A metal filter housing will ultimately rust or corrode and contaminate the process media. This can never happen with a Hayward PVC or CPVC all plastic bag filter housing, it will never rust, corrode or contaminate the process media and the housings light weight makes installation easy.
|
|
Maxi-System
- Available with 4 bags, 8 or 12 on demand
- User friendly eye-bolt closure mechanism with spring assisted cover lifter
- Recuction of bypasses due to filterbag safety-lock
- Version in 1.4301 and 1.4571
- Surface glass beaded
- Optional with tangential inlet/outlet
Specifications
Max. Flow-rate: 160 m³/h
Filter area: 2 m²
No. of baskets: 4
Volume housing: 210 Liter
Weight housing: appr. 220 Kg
Installation height: appr. 226 cm
Installation: 4 Legs
|
|
Mini-System
Features:
- Cover with quick lock system
- Compact design, high efficiency
- Special connections on demand available
- Surface glass beaded, all housings inclusive mesh basket & filterbag
Specifications
- Max. Flow-rate: 6 m³/h
- Filter area: 0,09
- Volume housing: 3 Liter
- Weight housing: appr. 3,5 Kg
- Installation height: appr. 59 cm
|
|
Eco-System
Features
- Quickly and easy to open due to star handle
- Solid Cover, opening direction changeable in the field
- Solid bag holder, resists pressure surge
- Different gaskets available
- Material 1.4301 or 1.4571
- Surface glass beaded
- All Housings inclusive Mesh Basket & Filterbag
- Available as 10, 16 or 25 bar-version
- Excellent value for money
Specifications
- Max. Flow-rate: 20 m³/h
- Filter area: 0,25
- Volume housing: 16 Liter
- Weight housing: appr. 18 Kg
- Installation height: appr. 100 cm
|
|
- Large surface area at an economical cost
- Integral Sensor Switch for automatic filter monitoring
- Media is easily and quickly replaced
- DF is duplexed for continous-run applications
|
|
The Electric H2O BF Series Bag Filter remove suspended particulate from water and
other process applications. Contaminants such as pipe scale, grit, waxes, metal chips, rust and airborne debris from many sources are removed in a consistent, proven manner. Electric H2O offers a variety of bags designed to remove particles from 0.35 to 800 microns. Optional features include a system-matched pump, motor, PLC control, bag change out alarm, instrumentation and piping.
|
|
Bag filters have many uses in coolant filtration. They are often used as a pre-filter to remove large solid contaminants that might cause pump problems. They are well suited applications with modest solids loading. Chips and swarf that are porous can fill the bag, providing very efficient filter media use. Bags are a good pick on applications that require the contaminants to be packed in drums for disposal, as the bags collapse and pack easily.
Bag filters have a relatively small surface area, about 4 – 5 sq. ft. in the largest standard housings. Therefore, we do not recommend them where the solids form a thin impervious layer, blinding off coolant flow.
|
|
|
Bypass-free filtration and optimized capacity utilization. The cleaned solids remain in the filter bag and can be disposed of with it.
|
|
|
The BHS-Belt Filter can be used for separating sedimenting and abrasive solids from suspensions with little wear. The various filtrates are separated exactly and without intermixing. If required, the filter cake can undergo further treatment in the form of multiple reverseflow washing, suction drying or pressing.
|
|
Dual Belt Filters
These are sludge dewatering devices that apply mechanical pressure to a chemically conditioned slurry, which is sandwiched between two tensioned belts, by passing those belts through a serpentine of decreasing diameter rolls. The machine can actually be divided into three zones: gravity zone, where free draining water is drained by gravity through a porous belt; wedge zone, where the solids are prepared for pressure application; and pressure zone, where medium, then high pressure is applied to the conditioned solids.
Typically, a belt filter press receives a slurry ranging from 1 - 4 % feed solids and produces a final product of 12 - 35 % cake solids. Performance depends on the nature of the solids being processed.
Typical Applications:
- Food processing wastes
- Pulp & Paper wastes
- Chemical sludges
- Pharmaceutical wastes
- Industrial waste processing sludges
- Petrochemical wastes
|
|
|
|
