|
|
Rosedale High Efficiency Filter Bags
Our HI-E series of bag filters meets the most stringent needs for fine process, hydraulic fluid, and lubricant filtration. All are made of unique microfiber materials, designed to increase the efficiency and dirt-holding capacities of these bags.
Microfiber Material Construction
Polyester or polypropylene microfibers and standard fibers are variably calendered to produce a single layer of microfiber material. Our unique construction can provide filtration to a 1 micron rating. Polyester microfiber material should be used where oil adsorption is not desirable or where higher temperatures are required.
Filtration Level
These bags have been tested by an independent laboratory to determine the filtration efficiency and dirt holding capabilities for each. They have been manufactured so that the efficiencies for both polyester and polypropylene are identical.
|
|
Liquid Filters
AMERICAN FABRIC FILTER CO. provides a complete range custom manufactured liquid filter bags for all standard and most custom vessels in plain or glazed felts from ½ to 100 micron and mesh from 5 to 800 micron.
Construction options include plastic, carbon, stainless and PVC-coated steel rings; handles, draw strings and muslin or mesh (multi-layer) covers.
All filters are custom manufactured to meet your requirements. Please have the filter style designation or measure the length, flat width of the bag and ring diameter (if used when requesting a quote. For unusual or difficult to measure applications, a sample bag that you know fits is most desirable.
|
|
AR-Filterbags: Size 0
- diameter: 102 mm
- lenght: 229 mm
- area: 0,09 m²
- Collar/Ring types: Zinc Plated
|
|
|
|
|
|
Strainer Bags
Menardi manufactures high quality liquid filter bags to fit standard size filter vessels, as well as custom designed products where requested. The constituent materials have been chosen for their purity, ensuring consistent high quality and performance. Filter bags are available in traditional stitched form or with a fully welded construction, and are fitted with a comprehensive choice of rings.
Menardi is a leading manufacturer of fully welded filter bags, which are available for applications requiring standard polypropylene or polyester felts, extended life felts or high efficiency media. All seams are welded rather than sewn, and combined with either of our positive sealing moulded Welseal (polypropylene or polyester) welded rings, no process liquid can bypass through needle holes caused by the sewing process or around a sewn snap ring. The Welseal ring forms a hermetic seal between the filter bag and housing, eliminating any possibility of bypass around a steel ring, which is a potential source of product contamination. These features ensure that fully welded filter bags perform to a higher efficiency than a sewn equivalent.
|
|
|
|
|
|
U.S. Air Filtration can provide dust collector filters (liquid filter bags) for all types of liquid filtration systems. We offer a complete line of replacement and custom designed dust collector liquid filters to fit most manufacturer filter bag housings.
Our liquid filter bags are carefully fabricated and sized to ensure ease of installation and change-out. Liquid filter bags are available from 1 to 1500 microns to suit your application. Standard felt bag materials include polypropylene, polyester, nylon, nomex, or absolute rated polypropylene micro-fiber material. Mesh bags are constructed of nylon monofilament, polypropylene monofilament, or polyester multi-filament material. For high purity applications we offer FDA compliant PolyMicro® BOS series bags which have seamless construction, graded density media, and the patented Polyloc® ring which provides a hermetic seal between bag and housing. In addition to edible oils and other food and pharmaceutical applications, liquid filter bags are also ideal for use in semiconductor and cosmetics manufacturing.
|
|
|
PROGAF filter bags bring a new, high-performance alternative to applications requiring absolute filtration. Their progressive density depth filtration delivers high efficiency (up to 99.9%) and long life like a filter cartridge with all the convenient features of a bag filter. In comparison with other filtration technologies, PROGAF delivers lower operating costs while retaining the ease of change-out typical of a bag filer.
|
|
With years manufacturing experience, ST Filter is capable to produce different types of customized bags. The bags can be made from woven and non-woven fabric, even from metal materials. ST Filter can either stitch or weld the bags into different shapes to fit for various working conditions from all customers needs.
Fabric Materials:
Woven and non-wovens fabrics: Polypropylene · Polyester · Nylon · Nomex · PTFE · Nylon monofilament · Polypropylene monofilament · stainless steel monolilament· Copper monolilament.
|
|
PiP housings and PiP elements are used for process filtration. It is about a brand-new developed series of filters. It includes pleated cartridge filter elements and bag replacement elements for process filtration as for instance filtration of cleaning liquid, lacquers, colors. Originally, pleated cartridge filter elements were developed for the filtration of cleaning liquids, nevertheless they are applicable in a wide range of areas.
|
|
|
Designed for removing trace contaminants down to 1 micron. Ideally suited for filtering and corrosive solutions including electroless copper and nickel to 200°F (93°C).
|
|
|
A FLOWLINE stainless steel bag filter housing from Eaton is the best choice for industrial, commercial and OEM applications that do not require a Code Stamp. Its cost-effective design incorporates all of the features heavy duty applications demand, including an investment cast swing bolt cover that can be adapted to different opening directions in the field and a quality stainless steel mesh restrainer basket for reduced pressure drop.FLOWLINE's stainless steel construction ensures years of trouble-free, consistent performance at a price comparable to that of many carbon steel housings.
|
|
| ... products without technical information |
| |
Filter Collar Bonder™
Designed for attaching plastic circular collars to nonwoven filter bags
Suited for low-production assembly of bag filters for chemical and industrial liquid applications
Can assemble between 50 and 80 bags per hour*
Six-step welding process takes as little as 45 seconds to produce a reliable 360-degree bond
Speeds production by eliminating need for adhesives
Easy and quick tooling changes to accommodate collars from four to seven inches in diameter
Minimal training required
*For assembly of up to 200 bags per hour, Sonobnd's RingMaster™ is the machine of choice
|
|
|
|
|
|
AMERICAN FABRIC FILTER's technical sales staff gets to choose from dozens of fabrics when they're designing your filters, connectors or other custom products. First, we will talk to you about your requirements. Next, we will make suggestions for materials and designs. Finally, with your input and approval, we will custom manufacture the products quickly and cost-effectively.
In addition to common woven and non-woven textiles, we stock vinyl / rubber-coated fabrics, synthetic / stainless steel screening and a range of snap bands, webbing and hardware. We also work with an extensive range of special order fabrics for applications needing high temperature, chemical resistance, extra strength or air permeability. Many unique fabrics are, or can be treated to shed sticky dust, bleed static electricity or resist burning.
To determine exactly how much fabric you need to attain your desired level of filtration, use our handy air flow to cloth calculator. Remember that your manufacturer's reccomended bag size is most likely smaller than necessary to achieve proper filtration.
|
|
CONEX® /NOMEX® FELT/ (Aramid)
- Recommended continuous operation temperature: 400 F
- Maximum (short time) operation temperature: 425 F
- Resistance to alkalies: Good
- Resistance to mineral acids: Fair
P84® FELT/POLYIMIDE
- Recommended continuous operation temperature: 475 F
- Maximum (short time) operation temperature: 500 F
- Resistance to alkalies: Fair
- Resistance to mineral acids: Good
- Resistance to organic acids: Good
TORCON®/PROCON® FELT/PPS (fka RYTON®)
- Recommended continuous operation temperature: 375 F
- Maximum (short time) operation temperature: 400 F
- Resistance to alkalies: Excellent
- Resistance to mineral acids: Excellent
- Resistance to organic acids: Excellent
|
|
Synthetic fiber-based non woven filter products ensure uniform depth loading with optimal low pressure drop performance.
* 100% saturation with a special adhesive “tackifier” prevents migration of particles down to 5 microns
* Gradient density structure ensures uniform laminar air flow throughout the spray booth
* Non-discoloring High Temperature scrim backing
* F5 and F6 efficiencies as per EN 779:2002
* DIN-CERTCO Certification and Paint compatibility “Lacquer Test Certificates” are available on part of the product range
* Approved by major automotive manufacturers
|
|
3M produces advanced textiles for manufacturing high temperature filter bags which can be used at temperatures up to 700°F (371°C). This advanced fabric is used successfully in hot gas filtration baghouses.
Features
- Efficient particulate filtration
- High temperature capability
- Resistance to thermal excursions
- Abrasion resistance
- Retrofit existing baghouses
Applications
- Cement manufacturing
- Incineration
- Chemical Processing
- Metal Processing
- Petrochemical processing
- Product collection
- Coal combustion
|
|
|
|
|
|
Heavy-Duty Dust Collection
The continuous duty bag dust collector for those applications where cartridges will not work. The Bagtron comes in a full range of sizes, from 67 sq. ft. to 1750 sq. ft. of filter, thus giving CFM's of air moved from as low as 500 CFM and as high as 25,000 CFM. In addition custom / larger sizes are available.
Self Cleaning While Running
Online cleaning is accomplished by a solid state control board which sequentially energenizes solenoids, allowing diaphragm valves to dump compressed air from the storage header into the blow-down pipe. The blow-down pipes have orifices over the inlets of each bag. The primary air is then joined by secondary air in the clean chamber both to flex the bag, cracking the dust cake, and also to blow off the loosened dust. The large agglomerated dust particles will then fall to the hopper for discarge from the collector. The compressed air jet is processed through a Venturi before passing to the fabric of the bag.
Specifications
- 14 Gauge with ribs
- Magnehelic gauge
- 16 oz. singed polyester felt
- Internal Venturi
- Galvanized bag cages
- Nitro blue enamel
- 4.75" Dia bags - 6, 8, or 10 ft. long
Options
- Direct mounted blower/motor
- Volume control damper
- Fan silencer
- Bin vent design
- Rotary air lock
- Platform & ladder packs
- Explosion vents
- Photohelic gauge
|
|
Auto M shaker filter
The Auto M Z-Series is the latest generation of robust simple mechanically cleaned dust collectors suitable for non-continuous duty for industrial, commercial and educational locations.
Key features
• Neat, compact, unobtrusive, easy to clean exterior
• Robust weatherproof welded steel construction
• Electric shake cleaning, perfected by 30 years' experience
• No need for compressed air
• ATEX certified Baseefa 03 ATEX0225 for explosive dusts
• Simple maintenance, access from clean air side
• Many options including secondary filters to increase versatility.
Typical applications
• Metalwork, grinding, fettling, sanding, polishing
• Woodwork, dust extraction from small and medium workshops
• Bulk powders, chemicals, sack tipping, weighing, bagging
• Educational workshops – ceramics, metal work, crafts, woodwork,
|
|
U.S. Air Filtration baghouses (also called pulse jet baghouse, pulsejet dust collectors, etc...) are self contained, fully automated where needed. We also supply and install ducting, access platforms, ventilation and instrumentation. Baghouses are engineered for dusts of 3 microns and larger, in the following applications:
- Woodworking
- Powder processing
- Material handling
- Primary metals, including steel-making
- Metals fabrication: grinding, sawing, sanding, polishing
- Papermaking
- Ceramics manufacturing
- Mixing and blending options
- Mining
- Foundries
- Glass Plants
- Battery Plants
- Universities
|
|
FMK25 cassette filter
The FMK25 range of reverse jet cassette filters was developed for continuous operation in industrial process filtration and dust collection applications – incorporating the long established easily maintained Dantherm pocket fabric filter cassette.
Key features
• Tough galvanised steel construction
• Weatherproof for exposed locations
• Integral pre-separation chamber
• All maintenance from unit front
• Independently tested (FMKZ) with ATEX compliant features for explosive dusts
• Efficient cross flow / down flow inlet air pattern
• Wide range of integral or remote fans
Typical dust control and process applications
• Bulk materials handling – conveying, screening, sieving, mixing, bin/silo venting
• Building materials manufacture and distribution
• Chemical, plastics and pharmaceutical powders
• Processes with light or medium dust loading
|
|
TP type bag filters
The TRIPULS bag filter is a space-saving filter that still provides optimum performance.The complete filter element (filter medium plus frame), specially designed for the TRIPULS filter, allows optimum deformation of the filtering medium during the cleaning of the filter, comparable that undergone by a TP.
Each filter element includes three injection tubes. Their design and the resulting features (high flow and a big difference in cleaning pressure), combined with the special TRIPULS filter element, guarantee maximum filtration for low compressed air consumption.
These qualities, added to the compact construction, with the possibility of the horizontal or vertical assembly of the filtering elements, make the TRIPULS an ideal solution for many dust extraction problems, when the space available is restricted.
|
|
Venturis
Venturis add to the cleaning efficiency of pulse-jet baghouses. Standard Filter offers a wide variety of styles and sizes for both top and bottom removal cages. We can supply either spun or cast venturis manufactured from carbon steel, stainless steel, aluminum or galvanized steel.
|
|
S-Series tubular bag filter
The Dantherm S-Series budget dust collector range is a simplified version of the long established and respected Dantherm NF wood waste filter family. Quick to install and easy to operate, it is the ideal solution for the smaller workshop. It is designed for indoor locations and can be readily re-located as required
Key features
• Neat, compact, unobtrusive
• Quick and easy to install
• Bag or steel bin dust collection options
• Standard units in three sizes
• One bag size fits all
• Quiet running efficient 1450 RPM fans
• Simple maintenance
• Dantherm QF versatile clip together duct connections
Typical applications
• Woodwork, dust extraction from small and medium workshops
• Mixed workshop applications
• Educational workshops – ceramics, crafts, woodwork,
|
|
|
|