|
|
|
|
|
|
Pure water is a vital resource for every scientific application. Aurora Biomed's Crysta Series is a line of water purification systems that delivers the best technical results for any lab. The Crysta 500, 1000, and 2000 systems produce highly purified lab water for three different areas of scientific applications. Both accurate and reliable, Crysta delivers high quality purified water that meets the American Standard for Testing & Materials water purity specifications. Crysta also surpasses the Clinical & Laboratory Standards Institute standards for Type 1 and Type 2 water purity levels.
Aurora Biomed's Crysta Series uses special system features to deliver pure lab water to meet any pure water demands- a timed dispense mode allows for walk-away unattended operation, innovative cartridge monitoring systems ensure purity standards are met, and real time displays let the end user actively monitor water purity levels. By delivering highly purified water at its reliable, efficient and robust rate, the Crysta Series is a proven cost-effective and high performance water purification system that will deliver significant value to any lab
|
|
18.2 megohm
Purite offer a wide range of products to economically produce all types of purified water to a wide range of quality and volume requirements.
Technologies / Processes:
Ion Exchange: Demineralisation, Softening / Organic Scavenging
Membrane Deionisation: Reverse Osmosis, Continuous Electro-Deionisation (CEDi)
Filtration: Carbon Filtration, Physical Filtration, Ultrafiltration
Oxidation / Disinfection: Ultraviolet, Chemical, Heat
|
|
BS EN ISO 3696 Grade II
A consistent supply of all qualities of purified water on demand is crucial for the smooth operation of any laboratory. From laboratory glassware washing and reagent make up, through to life science and molecular biological applications, Purite has been supplying cost effective and reliable product solutions to organisations all over the world for over 25 years.
We offer an extensive range of options to economically produce all types of purified water, including ultrapure water, to a wide range of quality and volume requirements. Our solutions range from low maintenance stand-alone units for benchtop or wall mounting, through to centralised laboratory systems.
Our water purification systems produce water adhering to the following standards: BS EN ISO 3696 and ASTM D1193 - 99E1.
|
|
| ... products without technical information |
| |
The Deoxygenation system for injection water, can be delivered in two different versions; Minox DeOx System - 2 Stages, or Minox Deox System - Compact Tower.
The MinoxTM DeOx System - 2 stages :
This is the ultimate Deoxygenation system configuration available in the market today. It gives extremely small and light units and requires a minimum of maintenance and utilities.
The MinoxTM Deox System - Compact Tower:
By utilizing the MinoxTM process in conjunction with a tower and packing, the same technical features as the 2-stage system are achieved. It will however require more space and support than the 2-stage system, but still significant less than a conventional system. This means that overall, for most new installations, the 2-stage system will be more cost effective.
|
|
Seawater Deaerators
Edwards is a market leader in the manufacture of deaeration equipment. We offer a complete range of deaerators including seawater deaeration packages for use in water injection systems. These designs include conventional packed column vacuum deaerators and the unique Edwards patented spray packed vacuum deaerator, which uses the patented spray distributor technology in conjunction with high mass transfer efficiency packed beds. We can also provide inlet gas stripping, steam stripping and trace gas assisted deaerators.
|
|
The world's water consumption rate is doubling every 20 years, outpacing by two times the rate of population growth. It is projected that by the year 2025 water demand will exceed supply by 56%, due to persistent regional droughts, shifting of the population to urban coastal cities, and water needed for industrial growth. The supply of fresh water is on the decrease. Water demand for food, industry and people is on the rise.
Lack of fresh water reduces economic development and lowers living standards. Clearly, there is a critical worldwide need to better manage this increasingly valuable resource.
Desalination systems from GE Water & Process Technologies can make abundant fresh water both from seawater and from challenging brackish sources.
|
|
R24-08-1111000: 10 gpm Commercial RO w/ Adjustable Recovery
Description:
7.55 hp 230v motor, heavy-duty multi stage centrifugal pump, low pressure shut-off with automatic restart, stainless steel pressure vessels, adjustable recycle lines, on/off switch, sample valve, pretreatment interlock input. Available with programmable concentrate auto flush, electronic conductivity meter and alarm output.
|
|
| ... products without technical information |
| |
The CJC™ Blue Baleen OilAbsorb System are polishing systems, used to absorb oil from bilge water to below 5 ppm.
Based on a unique absorption principle with the specially developed and patent pending CJC™ Blue Baleen CJC™ OilAbsorb Inserts, the systems absorb oil from bilge water, process and waste water, ensuring environmentally friendly operations and constant and compliance with environmental regulations or internal ISO 14001 Objectives and Targets.
Typical applications are marine bilge water systems, wastewater treatment, rinse water and process water for recycling purposes.
With low operational costs, and practically no maintenance requirements, the CJC™ Blue Baleen OilAbsorb Systems are cost-effective solutions to bilge- and wastewater problems within industry and marine applications.
|
|
Oil/water separating filter.
The delivery filter is a waterabsorbing cartridge. This provides extra protection for engines that are refuelled at the station.
These filters separate and absorb any water that may be found in the diesel fuel. The absorption of water gradually reduces the filtering capacity and increases the head loss caused by the filter.
The filter must be replaced when it becomes saturated.
Characteristics:
Filtering capacity 30 μm / 10 μ
Flow rate 60 - 100 l/min
Operating pressure 3.5 bar
Bursting pressure 10 bar
|
|
Filters separator diesel water/gas oil RACOR
Description:
- A broad range of filters for the protector of the engines with the series SPIN ONE of Parker RACOR conceived for the systems of modern injection.
- Flow of 57 with 600l/h.
- Filtration of 2,10 or 30 microns
Advantages:
- Almost indestructible transparent Bowl, resistant to UV and winter temperatures.
- Powerful pump of starting and heaters integrated in the head of the filter.
- Filter Media hydrophobic Aquabloc.
- Water Presence detector.
Applications:
- Filtration of diesel biodesel and gasoline for TP, Bus, Truck, Agriculture, Mobile, Navy, Generator sets
|
|
| ... products without technical information |
| |
SW
Dimension-
19.8 X 6.4 X 15.15 (mm)
Certificate-
UL, cUL, ENEC14
Typical Application-
Automotives, White goods,
Security System, Electric Devices
|
|
DW
Dimension-
14.7 X 5.4 X 12 (mm)
Certificate-
UL, cUL, ENEC14
Typical Application-
Automotives, White goods,
Security System, Electric Devices
|
|
- Connector industry PCB, solder terminal lugs or PVC cable
- Conforms to standard IP 67
- Silver or gold-plated contacts
- Wide choice of levers
- Operating temperature up to 130°C / 266 °F
|
|
The sealed sub-miniature MP420 microswitch is a simple snap-action
changeover switch, which is connected by means of a cable directly, overmoulded into the housing.
|
|
saia subminiature waterproof micro-switch
Caractéristiques :
• div. chevilles de fixation
• bornes à souder
• raccordement rapide de 2,8 mm
• bornes pour CI
• div. formes de levier possibles
• étanchéité IP67
Pouvoirs de coupure : 250 V/CA, 5 A
Dimensions (mm) : 20 x 17,5 x 6,4
Organe de commande :
• poussoir
• levier plat
• levier à galet
Homologations : UL, CSA, ENEC
|
|
Features
- Silicon-free version available
- Models available for operating temperatures up to 120°C
- Rated for currents up to 10 amp at 250VAC
- Range of auxiliary actuators available (can also be retrofitted)
- Various contact materials available, depending on application
- Mechanical life: min. 1 x 106 operations
- Wide variety of connection options
|
|
|
|
see the results for the following category : 
