|
|
Analogue addressable fire detector EBL512 G3 Panasonic Electric Works Europe AG
EBL512 G3 is an analog addressable fire alarm system but also conventional detectors can be used. EBL512 G3 fulfils the EN54 standards EN54 part 2 (Control and Indicating Equipment) and EN54 part...
|
|
Infrared system for early fire detection WASTE-SCAN InfraTec GmbH Infrarotsensorik und Messtechnik
The automated early fire detection system WASTE-SCAN is based on the principle of infrared thermography. It provides a continuous, non-contact temperature measurement at the surface of a waste collection, even...
|
|
Infrared system for early fire detection DIAS Infrared
Our fire detection system is a reliable system for surveillance and recognition of spontaneous fires inside bunkers or free air dumps of waste or combustible materials like paper or charcoal among many others. Since the dumped materials are mostly inflammable the probability of spontaneous...
|
|
Analogue addressable fire detector ML-110X series Maxlogic MAVILI ELEKTRONIK AS
Maxlogic ML-110X Series Intelligent Analogue Addressable Loop Powered Base Sounder / Sounder Beacon Maxlogic Loop Powered Base Sounder / Sounder Beacon is an ideal solution for any type of fire alarm applica- tion. Its primary application is...
|
|
Fire detector AMETEK Process Instruments
This detector provides advance warning of the onset of coal mill and silo fires through the early detection...
|
|
Laser fire detector 24 V, 1 A | FD-DA704 CIRCONTROL SA
Aspiration Laser Detector of high sensitivity. Dynamic range of 0.005% to 20% obscuration per meter. Four pipe inputs...
|
|
Firecat The Firecat is an extremely flexible fire sensor for use with security or other systems operating at 12Vdc. The unit can be configured to operate either as an optical, optical-heat, rate...
|
|
Pyreos highly sensitive pyroelectric detectors can be designed and manufactured into miniature IR sensor arrays that can enhance the capability of all dual and triple IR flame detectors, reducing emergency response times and improving levels of safety in high risk industrial settings. Up to now, there has been no automatic way to detect the position of a flame within the field of view when using...
|
|
Infrared system for early fire detection ARTUS ECO m-u-t AG
LWIR Temperature Monitoring – ARTUS ECO ARTUS is a fully automatic temperature measuring and monitoring system. It uses a modern LWIR microbolometer camera (long wave infrared) to precisely measure surface temperatures at an accuracy of up to 1K using a contactless method. ARTUS automatically and continuously checks the monitored area to make sure it is within the specified...
|
|
Laser fire detector VESDA® Fike
When high value assets, equipment or irreplaceable items are at stake, early warning of a smoke or fire problem, is essential. Compatible and complimentary to each of Fike's fire alarm and fire suppression systems,...
|
|
Fire detector FS-1000E TAKEX Europe
Description The FS-1000E sensor quickly detects ultraviolet rays contained in flames and...
|
|
Fire detector ATEX II 2 G EEx-d IIC T6 | TMP2 series Oggioni
The TMP2 series of fire and overheat detectors, includes electronic circuit for signal conditioning...
|
|
Fire detector max. 10 m | FS-1000E TAKEX America
The FS-1000E sensor quickly detects ultraviolet rays contained in flames and activates a...
|
|
Coal mill fire detection system LAND INSTRUMENTS International
LAND offers a system capable of monitoring the entire coal handling process including applications...
|
| |
Fire warning horn with xenon beacon AL100 E2S
The AL100 is a high output, 104dB(A) alarm sounder combined with a beacon. The compact, robust housing is ideal for all general signalling applications...
|
|
Fault tolerant fire and gas detection system SYNTEL SIMTRONICS
Secure field bus for Fire & Gas system solution WITHOUT COMMUN FAILURE MODE Since 1948, SIMTRONICS has specialised in high technology products for the analysis and detection of gas. Today, the Syntel System...
|
|
Fault tolerant fire and gas detection system EQ3001 EQP Detector Electronics Corp. (Det-Tronics)
The Det-Tronics Eagle Quantum Fire and Gas Detection/Releasing System serves multiple roles in the monitoring and protection of hazardous areas. It is a "fire detection and extinguishing agent release system"...
|
|
Fire warning horn with LED beacon 10 - 230 V, 108 dB | 434 series WERMA
Maintenance-free, electronic horn with a long life duration of up to 5,000 hrs Optical...
|
|
Analogue addressable fire detection system TYCO FIRE & INTEGRATED SOLUTION
Tyco Fire and Integrated Solutions Analogue Addressable Fire Alarm Systems are provided under the brand names of Discovery and Voyager. Both these panels are ideally suited for the protection of larger premises, especially those that require more complex system requirements. They provide system flexibility, intelligence, speed of identification and more importantly, a wide scope of control in the...
|
|
Analogue addressable fire detection system TE-TLE Hochiki Europe
The TE-TLE is a 'virtual' loop device. Once the Fire Alarm Control Panel is connected to the computer via the Interface, a 'virtual' loop can be created within the True Loop Emulator...
|
|
Fire warning horn 868STR Series EDWARDS SIGNALING
Xenon strobe light source with horn Flash rate 60 fpm 100 dB at 1 meter/90 dB at 10 ft (measured in anechoic chamber) Low current draw Terminals for easy wiring Gray, engineered thermoplastic housing Diode Polarized...
|
| |
Fire warning horn with LED beacon ø 60 mm, 88 - 92 dB, -20 - 50 °C, IP43 | KLL AUER
KLL # KLL - combination of an electromechnical horn with signal beacon #...
|
|
Infrared / ultraviolet flame detector for fire safety applications FS-10 Dräger Safety
Dräger FS-10 The Dräger FS-10 is a test torch capable of function testing the Dräger Flame 1300 IR Detector, Dräger Flame 1700 UV Detector, and Dräger Flame 2300 UVIR Flame...
|
|
Multispectrum IR flame detector for fire safety applications Phoenix Triple IR Rosemount Analytical
Very serious risks to human life, productivity and equipment are always present at industrial facilities that store, transport and process flammable or explosive chemicals. Automatic flame detection and protective action must be initiated within seconds whenever a fire ignites. Net Safety's [Emerson Process Management] Phoenix Triple IR Multi-spectrum flame detector provides the reliable and instantaneous...
|
|
The Model FL3111HT is a high temperature rated (125°C) ultraviolet (UV) optical flame detector designed to detect unwanted fires while...
|
|
Ultraviolet flame detector for fire safety applications Model 602 Codel International
Model 620 and 611 flame detectors are designed to detect the ulta-violet light emitted by an open flame within a confined public place. The robust,...
|
|
Combined flame detector and video camera for fire safety applications SigniFire IP™ Fike Europe
SigniFire IP Video Smoke detection camera, combines the enhanced resolution and picture clarity of a standard...
|
|
Carbon monoxide (CO) detector for coal mill fire detection AMETEK Process Instruments
Mill and Silo Fire Detector This detector provides...
|
|
The Fire Sentry FS24X is a quantum leap in flame and fire detection with its sophisticated software and detection technology. It is the latest generation high technology Multi-Spectrum Triple IR (IR/IR/IR/VIS) fire and flame detector, which is part of our FSX™ family of advanced technology electro-optical flame detectors. The Fire Sentry FS24X uses our patented WideBand IR™ Infrared,...
|
|
Multispectrum IR flame detector for fire safety applications SharpEye 40/40I Spectrex Inc.
The 40/40I Triple IR (IR3) Flame Detector detects fuel and gas fires at long distances with the highest immunity to false alarms. The 40/40I IR3 can detect a 1ft2 (0.1 m2) gasoline / heptane pan fire at 215 ft (65 m) in less than 5 seconds. The 40/40I is the most durable and weather resistant flame detector currently on the market. Its new features include a heated window to eliminate condensation...
|
|
Multi-Spectrum IR (MSIR) sensor array provides increased range and a wide field of view Neural Network Technology (NNT) combination is highly immune to false alarms caused by lightning, arc-welding, hot objects, and other sources of radiation. Continuous...
|
|
Infrared flame detector for fire safety applications FV-300 Scott Health & Safety
The Scott Safety FV-300 FLAMEVision is a revolutionary flame detection instrument that utilizes a focal plane array (FPA) of 256 infrared sensors as a sensing component to locate the angular position of a fire...
|
|
Smoke detector FlammEx SILVER Total
FlammEx foto- optical 9 V Smoke AlarmIncl. 9 V Alkaline Battery - VdS approval Nr. 200054 ERG / GS marked,...