|
|
The Model FL3111HT is a high temperature rated (125°C) ultraviolet (UV) optical flame detector designed to detect unwanted fires while maintaining false alarm immunity. The FL3111HT detects only in the UV spectral range for optimized speed of response.
The FL3111HT's electronics are integral within its stainless steel explosion-proof housing, allowing detector information to be processed at the point of detection. The electronics are fully separated from the Exe wire compartment offering protection during installation and service.
|
|
The Model FL3100H is an Ultraviolet / Infrared flame detector designed to detect fires and provide alarm outputs directly from the detector while maintaining false alarm immunity. It detects fires by monitoring in both the ultraviolet (UV) and infrared (IR) spectral ranges, making it highly immune to false alarms. There is also a hydrogen-specific detector available that detects hydrogen fires.
FL3100 Series flame detectors' electronics are integral within their explosion-proof housings, allowing detector information to be processed at the point of detection. The detectors also provide a 4-20mA stepped output signal indicating detector status. The COPM (Continuous Optical Path Monitoring) self-test feature checks the optical path integrity (window cleanliness) and the detectors' electronic circuitry once every minute.
|
|
|
|
|
|
UV/IR FLAME DETECTOR
Net Safety's Ultra-violet/Infrared ( UV/IR ) flame detector delivers high performance security with functions and features that set it apart. The flame detection reacts to both UV and IR flame radiation delivering accurate and reliable fire monitoring, yet is immune to arc welding, hot body radiation, lightning or sunlight. Two spectrums of radiation must be recognized and confirmed by precisely tuned sensors for the UV/IR to initiate a fire condition, greatly reducing false alarms while providing critical safety performance to your site and personnel.
Enclosed in a rugged, explosion-proof housing, the Net Safety UV/IR flame detectors use the latest in modular microprocessor and UV/IR sensor technology — delivering accurate and reliable monitoring for hydrocarbon fires. It's capable of stand-alone operation or can be connected to a variety of control devices to create a dependable fire monitoring system. The user can define sensitivity and time delay settings and the built-in testing routines ensure continous operation.
The UV/IR Flame Detector has a extra wide field of view - up to 120 degrees, it has one of the lowest power consumption levels available on the market and a wide voltage range - all of these factors can lower your overall cost of ownership during design, installation and power draw requirements. This can add up to thousands of dollars PER DETECTOR over it's installation.
Net Safety has engineered a superior and affordable, UV/IR flame detector that is simple to operate and maintain while delivering all the security and performance required for high-risk, industrial installations!
|
|
The design of this new generation of detectors provides 3 main features :
• Performances
• Guaranteed detection
• Easy installation, use and maintenance.
The efficiency of SIMTRONICS flame detectors offers :
• High sensitivity,
• Very short response time,
• Reliability,
• Immunity from interferences
It also guarantees protection against fire risks in industrial environments and enables the control of fire fighting.
The housings are treated specifically to resist corrosive factors (stainless steel or aluminium housings).
These TV63 UV / 2xIR detectors have a wide viewing angle (110°) and a range higher than 45 m.
The integrated relays and a 4-20mA output enable the control of the TV63 by the control units or by PLC.
The detectors are equipped with an automatic test control, which regularly checks the functionality of detection, as well as the optical and electronic integrity of the system.
The detector’s non-stop auto-tests & intrinsic quality feature SIL 2.
|
|
|
The Model FL4000 is an advanced multi-spectral infrared (MSIR) flame detector designed to provide superior false alarm immunity with the widest field of view. The FL4000 employs a multi-spectral optical IR sensing array with a sophisticated Neural Network Technology (NNT) system to reliably discriminate between actual flames and the vast majority of false alarm sources (such as arc welding). The FL4000 is designed to detect typical fires such as alcohol, n-heptane, gasoline, jet fuels and hydrocarbons. In addition, the FL4000 can see through dense smoke produced by diesel, rubber, plastics and lube oil fires.
|
|
|
|
|
|
PHOENIX TRIPLE IR (MULTISPECTRUM FLAME DETECTOR
Very serious risks to human life, productivity and equipment are always present at industrial facilities that store, transport and process flammable or explosive chemicals. Automatic flame detection and protective action must be initiated within seconds whenever a fire ignites. Net Safety's Phoenix Triple IR Multi-spectrum flame detector provides the reliable and instantaneous flame detection response that is required in high-risk environments while utilizing advanced technologies to reduce false alarm events and provide rock-solid performance in any environment.
The Phoenix will only alarm when input conditions from three distinct IR wavelengths found in fires are satisfied. The Phoenix also incorporates our unique Automatic Digital Zoom (ADZ) technology which provides accurate detection of small and massive flames in the most difficult working situations where other detectors fail. Three precisely tuned IR sensors, ADZ technology, Automatic Visual Integrity, user selectable sensitivity and time delay provide unparalleled false alarm immunity and detection performance.
The Phoenix Triple IR is the ONLY flame detector on the market that does not have an external reflector or light source. Experience has shown that external reflectors and light sources often become obscured by industrial dirt and corrosion which causes unwanted fault alarms that requires difficult and costly maintenance to correct. The Phoenix Triple IR flame detector completely eliminates these issues in applications where salt, dust, petroleum vapor, heavy rain, snow or blowing sand are present.
|
|
The design of this new generation of detectors provides 3 main features :
• Performances
• Guaranteed detection
• Easy installation, use and maintenance.
The efficiency of SIMTRONICS flame detectors offers :
• High sensitivity,
• Very short response time,
• Reliability,
• Immunity from interferences
It also guarantees protection against fire risks in industrial environments and enables the control of fire fighting.
The housings are treated specifically to resist corrosive factors (stainless steel or aluminium housings).
These TV63 detectors have a wide viewing angle (110°) and a range higher than 85 m.
The integrated relays and a 4-20mA output enable the control of the TV63 by the control units or by PLC.
The detectors are equipped with an automatic test control, which regularly checks the functionality of detection, as well as the optical and electronic integrity of the system.
The detector’s non-stop auto-tests & intrinsic quality feature SIL 2.
|
|
|
|
|
|
ULTRAVIOLET FLAME DETECTOR
Net Safety's Single UV flame detector reacts to the ultraviolet radiation found in hydrocarbon fires, delivering accurate and reliable fire monitoring. The Single UV does not react when exposed to incandescent or fluorescent lighting, heaters or sunlight - meaning false alarms are virtually eliminated..
Enclosed in a rugged, explosion-proof housing, the Single UV uses the latest in microprocessor and UV sensor technology. It is capable of stand-alone operation or can be connected to a variety of control devices to create a dependable flame monitoring system. The user can define sensitivity and time delay settings to virtually eliminate false alarms and the built-in testing routines ensure continuous operation.
The Single UV has a Field of View of up to 120 degrees and is available with analog or analog/relay output configuration for 12 or 24 VDC systems - just let us know your requirements!
Net Safety's Single UV flame detector is globally certified Class I, Division 1 for hazardous locations to CSA, ATEX, Factory Mutual (FM), ANSI-UL/ISA, INMETRO, and GOST-R performance, technical and safety standards.
Net Safety has engineered a cost effective, high-performance flame detector, ideal for even the most high-risk, industrial applications!
|
|
Dräger Safety optical flame detectors provide the reliable detection of a wide range of both hydrocarbon and non-hydrocarbon based fires. Providing a perfect solution to the ever increasing demand of flame detection throughout industry, they can also be used along with Dräger gas detection technologies to form part a complete safety system
The reliability and flexibility of Dräger flame detectors, along with their worldwide approvals ensure suitability for just about any application anywhere in the world.
|
|
uv1a3
Specifications:
- Optical range: 190-270 nm
- Supply voltage: 560 VAC
(supplied by control)
- Mounting threads: 1/2" NPT
- Operating temperature: -40°C to 94°C
(-40°F to 200°F)
- Available in NEMA (Class 1, Div 2,
Group C and D) and Cenelec
approved explosion proof housing
(EEx d IIC T6)
|
|
AIE-EA, Ionization Smoke Sensor
STANDARD FEATURES
Uses the noise immune Digital Communication Protocol (DCP), which utilizes interrupts for fast response to fires
Built in fire test feature
Automatic compensation for sensor contamination
Simple and reliable device addressing method
Low Profile - Only 2.22" high, including base
|
|
95ir/95uv/95ds insight scanners
The Fireye InSight Type 95IR, 95UV, and 95DS flame scanners are microprocessor based flame scanners utilizing solid state infrared (IR), ultraviolet (UV) or dual (IR and UV) sensors.
|
|
HF-24, Ultraviolet Flame Detector
STANDARD FEATURES
Detects fast flaming fires
Highly reliable, long life UV receptor tube
Low power consumption
HF-24 can be intermixed with other types of detection on the panel's detection circuitry
Interchangeable with Hochiki America's standard smoke and heat detector bases
Size and color similar to other Hochiki America smoke and heat detectors
Easily maintained: cleaning can be accomplished without disassembling the detector
Not UL-listed
|
|
The automated early fire detection system WASTE-SCAN is based on the principle of infrared thermography. It provides a continuous, non-contact temperature measurement at the surface of a waste collection, even over large distances.
Main item of the system is the high-resolution thermographic camera VarioCAM® hr head manufactured by the German company JENOPTIK Laser, Optik, Systeme GmbH. It is based on an uncooled microbolometer detector FPA.
The thermographic camera VarioCAM® hr head has the following performance parameters:
(384 x 288) or (640 x 480) pixels for high geometrical resolution
high-contrast, low-noise thermal image
localisation of hot spots, even under dusty or smokey conditions
spectral range (7.5 ... 14) µm
real-time data acquisition at 50 / 60 Hz frame rate
internal automatic calibration.
|
|
|
With the fire detection system PYROVIEW/PYROSOFT WBFDS DIAS Infrared GmbH, VdS certified manufacturer of infrared cameras, offers you a complete system for supervision of your plants. Certified infrared cameras PYROVIEW are the heart of the automatic fire detection system. Infrared cameras PYROVIEW are based on state-of-the-art microbolometer arrays with up to 384 x 288 pixel and are well suited for industrial use with their robust housings and optional cooling and air purge systems.
|
|
|
HazardWatch is a modular Fire and Gas Detection System built using state-of-the-art industrial automation/control equipment to perform the requirements of an integrated Fire and Gas Detection System certified by Factory Mutual to be compliant to NFPA 72 (2002).
|
|
Secure field bus for Fire & Gas system solution
WITHOUT COMMUN FAILURE MODE
Since 1948, SIMTRONICS has specialised in high technology products for the analysis and detection of gas. Today, the Syntel System and its new line of remote sensors come at the leading edge of technologic innovation (30 registered patents) to guarantee a safe and efficient secured system :
• Very high safety level, SIL 2
• Distributed intelligence protocol where each sensor interacts with output modules,
• Safety ring topology with a single cable brings reduced costs,
• Open system,
• Integration and control of digital and analog signals,
• MODBUS / LonWorks gateway enabling connection with supervision systems, SCADA, PLC,
• Flexible configuration using its own dedicated configuration tool,
• Easy-to-use exploitation system.
|
|
LAND offers a system capable of monitoring the entire coal handling process including applications such as coal storage and transportation as well as the actual grinding.
The early detection of a coal fire is vital to the safe and efficient operation of any plant. LAND has a range of coal fire detection systems based upon the best monitoring technology available.
|
|
|
When automatic 24/7 fire protection is required, select from our complete line of AUTOPULSE® detection, control and fire suppression system release panels. Detection options include smoke, heat and flame detection. Also consider our VESDA® aspirating smoke detection technology.
|
|
MG-9000 SERIES INTELLIGENT ANALOGUE ADDRESSABLE FIRE DETECTORS
VIP (Very Intelligent Protocol) compatible. EN 54, EMC-CE and SSPB (Russia) and GOST R certified. Approved by Kazakhstan, Oman, UAE and Bahrain Civil Defence authorities.
Features
EN 54-5 ve EN 54-7 certified
Twin fire alarm indicators for 360° viewing
Soft addressable by use of Address Programmer
Remote indicator output
Communication interrupt for fast fire
alarm detection in 3 sec
Stable sensitivity
PCB protected by metal case
Protection from electromagnetic interference
MG-3510 Addressable Mounting Base compatible
MG-3600 Recessed Mounting Base compatible
Microprocessor-controlled
Clamp terminals to ensure firm contact with the base
Produced by use of Surface Mount Technology
|
|
|
|
|
|
MG/MGR-2000 SERIES CONVENTIONAL FIRE DETECTORS
Designed and produced according to EN 54 by use of Surface Mount Technology
providing stable sensitivity. EN 54, EMC-CE and SSPB (Russia) and GOST R certified.Approved by Kazakhstan, Oman, UAE and Bahrain Civil Defence authorities...
Superior design and excellent functional features of the MaviGard detectors are the result of the Research & Development work done using latest technological achievements in the fire alarm industry. Detectors are produced with Surface Mount Technology (SMT). Detector PCB is protected against electromagnetic interference and corrosion by minimizing contact with external medium. MG series detectors are compatible with all fire alarm control panels,
MGR series detectors are compatible with all security alarm control panels. All detectors are provided with blue plastic cover, which protects detector from dust, dirt etc. during construction and paint. Detectors are produced in white as standard but, according to customer's choice, various colours are available. Detectors can be provided with magnet-testing feature on customer's demand.
Features
* Stable sensitivity
* Microprocessor-controlled
* MGR models with relay output
* Twin fire alarm indicators for 360°
viewing
* PCB protected by metal case
* Protection from electromagnetic
interference
* Clamps terminals to ensure firm
contact with the base
* MG-3500 Universal Mounting Base
compatible
* MG-3600 Recessed Mounting Base
compatible
* Remote indicator output
* In MGR series normally close relay
output as standard (normally openalso available)
|
|
HAREZMIC SERIES INTELLIGENT ANALOGUE ADDRESSABLE SYSTEM ACCESSORIES
VIP (Very Intelligent Protocol) compatible.SSPB (Russia) and GOST R certified.
Approved by Kazakhstan, Oman, UAE, and Bahrain Civil Defence authorities.
Microprocessor-controlled
"Sof" addressable by use of Address Programmer
Easily programable by use of Loop Manager
Able to integrate into the cause-effect scenarios.
LED-indicated activation
Monitoring analogue value
Mesuring contamination level
Aesthetic design
Production by surface-mount technology
|
|
|
|
|
|
MAVIGARD MG-104 SERIES CONVENTIONAL EXTINGUISHANT CONTROL PANEL
MG-104 Series operates on cross-zone principle, has 4 detection zones and one
extinguishant release output which can be programmed according to site
needs. SSPB (Russia) and GOST R certified. Approved by Kazakhstan and Oman Civil Defence authorities.
Highlights
* 4 zones, 1 extinguishant release output
* Configurable latching/non-latching zones
* Configurable detection of short circuit as fire alarm
* Distinguished detector/MCP alarm detection
* Programmable 1st Stage sounder output delay
* Programmable extinguishant release duration
* Extinguishant release countdown timer
* Manual and Automatic/Manual extinguishant modes
* 1st and 2nd Stage relay outputs
* Solenoid valve and actuator compatible
* Remote control
* 6 programmable relay outputs
Features
Soft-touch buttons
Microprocessor-controlled
PCBs made by use of Surface Mount Technology
3 programmable and supervised sounder outputs
Compatible with all popular conventional fire detectors
Protection against electromagnetic interference
Optional repeater panels
Optional relay modules
Auxiliary power supply output
Display and LED test by use of single button
Built-in silencable buzzer
|
|
|
|
|
|
FN-LCD-N (9th Edition), LCD Network Annunciator,
STANDARD FEATURES
Dual RS-485 ports for primary fire network
RS485 slave bus for expansion - up to 32 FN-4127-IO boards or up to 15 FN-LCD-S serial annunciators and up to 16 FN-4127-IO boards
2 built-in RS-232 interfaces for programming via a PC and serial printer interface
4 on board programmable Form C relays rated at 1 Amp at 30VDC (Fire, Supervisory, Trouble & Auxiliary)
Same controls as the FireNET fire panel (Reset, Panel Sounder Silence, Lamp Test, Alarm Silence, Re-sound Alarm, Fire Drill, Programmable Function, More Events, More Fire Events, Enter & Exit)
Local piezo sounder for event notification
Supports user codes & firefighter key to enable access & controls
Powered by FireNET Aux 24VDC or UL fire listed Aux. 24VDC supply
Available in red or charcoal, and can be surface or flush mounted (using trim ring)
True network annunciator, any or all panels can be routed to the FN-LCD-N. In addition, each event category can be individually routed to the FN-LCD-N
Up to 64 FireNET panels & FN-LCD-N's can be networked together in any combination
500mA of auxiliary power available rated at 24VDC
Auto-learn feature
Built-in help & alarm information screens
Fire Drill function
Each FN-LCD-N is completely independent
Supports up to 32 FN-4127-IO boards on RS485 expansion port
The FN-LCD-N can be configured to remote reset, silence, resound, any or all panels on the network in any combination
|
|
Skum offers a range of electrical and manual fog/jet, water/foam monitors with exceptional flow characteristics. Our product range includes:
FJM-80 - a portable solution for foam/water discharge, used for fast response to fire incidents involving flammable liquid spills and vapour suppression
FJM-WTO - self oscillating units by internal water driven turbines with a low weight
FJM-MAN - manually operated monitors available for a number of alternate mounting positions, optimising throw range with delivery of water or foam in jet form or as a spray pattern
FJM-EL - remote control operation, with electric motor driven elevation and rotation movement.
|
|
| ... products without technical information |
| |
|
|
