|
|
The Model FL3100H is an Ultraviolet / Infrared flame detector designed to detect fires and provide alarm outputs directly from the detector while maintaining false alarm immunity. It detects fires by monitoring in both the ultraviolet (UV) and infrared (IR) spectral ranges, making it highly immune to false alarms. There is also a hydrogen-specific detector available that detects hydrogen fires.
FL3100 Series flame detectors' electronics are integral within their explosion-proof housings, allowing detector information to be processed at the point of detection. The detectors also provide a 4-20mA stepped output signal indicating detector status. The COPM (Continuous Optical Path Monitoring) self-test feature checks the optical path integrity (window cleanliness) and the detectors' electronic circuitry once every minute.
|
|
|
|
|
|
UV/IR FLAME DETECTOR
Net Safety's Ultra-violet/Infrared ( UV/IR ) flame detector delivers high performance security with functions and features that set it apart. The flame detection reacts to both UV and IR flame radiation delivering accurate and reliable fire monitoring, yet is immune to arc welding, hot body radiation, lightning or sunlight. Two spectrums of radiation must be recognized and confirmed by precisely tuned sensors for the UV/IR to initiate a fire condition, greatly reducing false alarms while providing critical safety performance to your site and personnel.
Enclosed in a rugged, explosion-proof housing, the Net Safety UV/IR flame detectors use the latest in modular microprocessor and UV/IR sensor technology — delivering accurate and reliable monitoring for hydrocarbon fires. It's capable of stand-alone operation or can be connected to a variety of control devices to create a dependable fire monitoring system. The user can define sensitivity and time delay settings and the built-in testing routines ensure continous operation.
The UV/IR Flame Detector has a extra wide field of view - up to 120 degrees, it has one of the lowest power consumption levels available on the market and a wide voltage range - all of these factors can lower your overall cost of ownership during design, installation and power draw requirements. This can add up to thousands of dollars PER DETECTOR over it's installation.
Net Safety has engineered a superior and affordable, UV/IR flame detector that is simple to operate and maintain while delivering all the security and performance required for high-risk, industrial installations!
|
|
The design of this new generation of detectors provides 3 main features :
• Performances
• Guaranteed detection
• Easy installation, use and maintenance.
The efficiency of SIMTRONICS flame detectors offers :
• High sensitivity,
• Very short response time,
• Reliability,
• Immunity from interferences
It also guarantees protection against fire risks in industrial environments and enables the control of fire fighting.
The housings are treated specifically to resist corrosive factors (stainless steel or aluminium housings).
These TV63 UV / 2xIR detectors have a wide viewing angle (110°) and a range higher than 45 m.
The integrated relays and a 4-20mA output enable the control of the TV63 by the control units or by PLC.
The detectors are equipped with an automatic test control, which regularly checks the functionality of detection, as well as the optical and electronic integrity of the system.
The detector’s non-stop auto-tests & intrinsic quality feature SIL 2.
|
|
95ir/95uv/95ds insight scanners
The Fireye InSight Type 95IR, 95UV, and 95DS flame scanners are microprocessor based flame scanners utilizing solid state infrared (IR), ultraviolet (UV) or dual (IR and UV) sensors.
|
|
The automated early fire detection system WASTE-SCAN is based on the principle of infrared thermography. It provides a continuous, non-contact temperature measurement at the surface of a waste collection, even over large distances.
Main item of the system is the high-resolution thermographic camera VarioCAM® hr head manufactured by the German company JENOPTIK Laser, Optik, Systeme GmbH. It is based on an uncooled microbolometer detector FPA.
The thermographic camera VarioCAM® hr head has the following performance parameters:
(384 x 288) or (640 x 480) pixels for high geometrical resolution
high-contrast, low-noise thermal image
localisation of hot spots, even under dusty or smokey conditions
spectral range (7.5 ... 14) µm
real-time data acquisition at 50 / 60 Hz frame rate
internal automatic calibration.
|
|
|
With the fire detection system PYROVIEW/PYROSOFT WBFDS DIAS Infrared GmbH, VdS certified manufacturer of infrared cameras, offers you a complete system for supervision of your plants. Certified infrared cameras PYROVIEW are the heart of the automatic fire detection system. Infrared cameras PYROVIEW are based on state-of-the-art microbolometer arrays with up to 384 x 288 pixel and are well suited for industrial use with their robust housings and optional cooling and air purge systems.
|
|
|
The Model FL4000 is an advanced multi-spectral infrared (MSIR) flame detector designed to provide superior false alarm immunity with the widest field of view. The FL4000 employs a multi-spectral optical IR sensing array with a sophisticated Neural Network Technology (NNT) system to reliably discriminate between actual flames and the vast majority of false alarm sources (such as arc welding). The FL4000 is designed to detect typical fires such as alcohol, n-heptane, gasoline, jet fuels and hydrocarbons. In addition, the FL4000 can see through dense smoke produced by diesel, rubber, plastics and lube oil fires.
|
|
|
|
|
|
PHOENIX TRIPLE IR (MULTISPECTRUM FLAME DETECTOR
Very serious risks to human life, productivity and equipment are always present at industrial facilities that store, transport and process flammable or explosive chemicals. Automatic flame detection and protective action must be initiated within seconds whenever a fire ignites. Net Safety's Phoenix Triple IR Multi-spectrum flame detector provides the reliable and instantaneous flame detection response that is required in high-risk environments while utilizing advanced technologies to reduce false alarm events and provide rock-solid performance in any environment.
The Phoenix will only alarm when input conditions from three distinct IR wavelengths found in fires are satisfied. The Phoenix also incorporates our unique Automatic Digital Zoom (ADZ) technology which provides accurate detection of small and massive flames in the most difficult working situations where other detectors fail. Three precisely tuned IR sensors, ADZ technology, Automatic Visual Integrity, user selectable sensitivity and time delay provide unparalleled false alarm immunity and detection performance.
The Phoenix Triple IR is the ONLY flame detector on the market that does not have an external reflector or light source. Experience has shown that external reflectors and light sources often become obscured by industrial dirt and corrosion which causes unwanted fault alarms that requires difficult and costly maintenance to correct. The Phoenix Triple IR flame detector completely eliminates these issues in applications where salt, dust, petroleum vapor, heavy rain, snow or blowing sand are present.
|
|
The design of this new generation of detectors provides 3 main features :
• Performances
• Guaranteed detection
• Easy installation, use and maintenance.
The efficiency of SIMTRONICS flame detectors offers :
• High sensitivity,
• Very short response time,
• Reliability,
• Immunity from interferences
It also guarantees protection against fire risks in industrial environments and enables the control of fire fighting.
The housings are treated specifically to resist corrosive factors (stainless steel or aluminium housings).
These TV63 detectors have a wide viewing angle (110°) and a range higher than 85 m.
The integrated relays and a 4-20mA output enable the control of the TV63 by the control units or by PLC.
The detectors are equipped with an automatic test control, which regularly checks the functionality of detection, as well as the optical and electronic integrity of the system.
The detector’s non-stop auto-tests & intrinsic quality feature SIL 2.
|
|
| ... products without technical information |
| |
A combination of independant UV (ultraviolet) and IR (infrared) flame detection plus a direct visual sight to the scanned flame in a single scanner head.
The advantages of the WINDOW 141 head are:
Pure UV detection (220nm peak): not affected by visible and sunlight radiations like a Si UV enhanced system would.
IR detection (1 550nm peak) very stable: not affected by visible radiations and temperature variations like for the Ge, PbS or other IR cells.
For easy installation, a ball swivel mounting on the burner front allows adjustment of the viewing angle. Standard 1'' NPT connections are used for the ball swivel and scanner head.
The visible section of the radiation is only for visual observation through the WINDOW (patented).The following can be observed:
Sight alignment
Flame quality
Lens cleanness
Operation of the shutter
Inside UV and IR LEDs
|
|
Infra-red Flame Monitor D-IR 55
Infra-red flame monitor for intermittent operation.
Analyses flame intensity (flickering) in conjunction with the D-LE 55 ISF-CG flame sensor
Features
monitoring of gas and oil burners of any load
suitable for intermittent operation
simple installation on TS 35 DIN-rail
Application
Chemical industry
Refineries
Cement plants
Waste incinerators
Steam generator
Heating plants
|
|
|
|
|
|
The self-checking SAFYR PACKSCAN flame detectors are designed for monitoring solid or liquid fuel burners (oil, pulverised coal, heavy liquid residues). They are adapted for multi-burner installations by facilitating flame discrimination.
A binary safety signal is transmitted in the presence or absence of a flame. The output signal is also available on terminals for recording or remote display purposes.
Operation of the SAFYR PACKSCAN flame detector is based on the characteristic flickering phenomena of flames, generally between 0 to 150HZ. It uses a silicium photodiode cell, adapted to the combustion frequency in the visible light band (320 to 1100nm).
A display indicates all the configured parameters, as well as the detection level.
30 years of experience in the field of flame detection gives the SAFYR PACKSCAN the following advantages :
• An ‘all in one concept’ with an integrated amplifier in the scanner head for easy installation.
• Two microprocessors for increased safety and reliability.
• Approved by APAVE to meet all safety criteria requirements
• Detection level indicator to simplify commissioning
• Various standard confi guration methods by internal switches, by remote and by serial link, to simplify configuration
• Two SPDT output switches to indicate flame presence and proper detector operation
|
|
The GasAlertMicro 5 IR, is a portable gas detector that simultaneously monitors atmospheric levels of up to five gases including carbon dioxide (CO2), oxygen (O2), hydrogen sulphide (H2S), combustibles (%LEL) and a range of toxic gases. Compact and lightweight, the GasAlertMicro 5 IR activates audible, visual and vibrating alarms in the event of a low, high, TWA or STEL alarm condition.
Utilizing a non-dispersive infrared (NDIR) CO2 sensor, the GasAlertMicro 5 IR offers premium accuracy and reliability. Suitable for personal protection in a wide range of applications, the GasAlertMicro 5 IR can dependably detect CO2 hazards in wineries and breweries, agriculture, food processing or any confined space entry application.
|
|
SIMPLIFIED INFRA-RED LEAK DETECTION SYSTEM THAT CAN EASILY BE INSTALLED ON THE VEHICLE DEVELOPED FOR THE DETECTION ON METHANE GASPIPES; TAKES ADVANTAGE OF THE ABSORPTION CHARACTERISTICS OF CH4; THE VEHICLE DRIVES DOWN THE STREET AND ABSORBES THE AIR FROM THE GROUND; THE ABSORBED AIR IS ANALYZED BY THE LASER DEVICE
; THE MEASURING AND CONTROL UNIT CONSIST OF EASILY INTERCHANGEABLE RACK; MODULES WITH VERY RELIABLE INDUSTRIAL POWER CONNECTORS; USES A LASER INFRARED SYSTEM FOR THE SELECTIVE DETECTION OF METHANE GAS WITH A PRECISION OF 1 PPM;
EASY TO INSTALL; LOW MAINTENANCE; EASY TO USE
|
|
X-Ray Fluorescence Gauges are used to measure coatings containing quantities of metal or heavy elements, on plastic or paper substrates. The sensor energy level is selected for the application, such that the photons striking the material cause it to fluoresce. The returned fluorescence energy provides the information necessary to precisely calculate the coatweight. This selective technique has significant advantages in simplicity of operation, accuracy, and reduced equipment costs.
The Model 105 and Model 107 X-Ray Fluorescence Gauges provide an accurate way to measure thin, high atomic number coatings on non-metallic films. By tuning the sensor to the required fluorescence energy, it is possible to detect thin coatings of Zinc, Iron Oxide, Silver, or a variety of other high atomic number coatings (see list for each gauge below). Typically the sensors can measure coatings in the range of 0 gsm to 25 gsm.
|
|
X-Ray Fluorescence Gauges are used to measure coatings containing quantities of metal or heavy elements, on plastic or paper substrates. The sensor energy level is selected for the application, such that the photons striking the material cause it to fluoresce. The returned fluorescence energy provides the information necessary to precisely calculate the coatweight. This selective technique has significant advantages in simplicity of operation, accuracy, and reduced equipment costs.
The Model 105 and Model 107 X-Ray Fluorescence Gauges provide an accurate way to measure thin, high atomic number coatings on non-metallic films. By tuning the sensor to the required fluorescence energy, it is possible to detect thin coatings of Zinc, Iron Oxide, Silver, or a variety of other high atomic number coatings (see list for each gauge below). Typically the sensors can measure coatings in the range of 0 gsm to 25 gsm.
|
|
The DigiPyro® Family of Digital Pyrodetectors
DIGIPYRO PerkinElmer's DigiPyro® Family - setting the digital standard in motion detection.
PerkinElmer is pleased to announce the newest members of the DigiPyro® family of digital output pyrodetectors, the DigiPyro Triple Channel PYQ 2898 Quad Element Detector, and introducing the new dual-channel models, the DigiPyro® PYD 1988 and DigiPyro® PYD 1978. They join the DigiPyro® PYD 1998, the first member of the DigiPyro® family of digital motion detection solutions.
The newest models, the PYD 1988 and PYD 1978, utilize the same dual-element configuration with an integrated A/D converter as the DigiPyro® 1998 model but are now available with two new, cost-effective window detection sizes.
The DigiPyro® Triple Channel PYQ 2898 Quad Element Detector offers a quad element configuration with two pairs of elements representing two channels and a third channel for temperature reference.
|
|
InfraTec is very flexible in the position of the used filters:
- InfraTec can deliver standard detectors with standard optical filters.
- If you need special filters either you may supply the filters or InfraTec may purchase the filters from our suppliers and will offer you a special detector with filters which meet your specifications.
- If you not know which detector/ filter meet your requirements please contact your local InfraTec representative. Together with the InfraTec R&D department they will be glad to present you a solution for your measurement problem.
|
|
PerkinElmer’s DigiPyro® Family for Motion and Presence Detection - setting the digital standard in motion detection.
Announcing the newest members of the DigiPyro® family of digital output pyrodetectors, the “Smart” DigiPyro and the “Mini” DigiPyro.
Learn more about the Smart DigiPyro and the Mini DigiPyro by downloading the Product Note – DigiPyro Family.
The DigiPyro® Triple Channel PYQ 2898 Quad Element Detector offers a quad element configuration with two pairs of elements representing two channels and a third channel for temperature reference. For more information you can download the datasheets for the PYD 1998, the PYD 1988, the new PYD 1978 and the DigiPyro Triple Channel PYQ 2898.
|
|
|
The SR Series Infrared Thermometer is a stand-alone two-color sensor designed to provide a temperature signal directly to process control or monitoring devices. Ratiometric thermometry provides reliable temperature measurements in difficult applications with changing emissivities or unresolved targets. The SR spot pyrometers Do not require a separate indicator/processor, therefore saving on installation space and costs. These IR thermometers are available in focusing single lens reflex or fiber optic versions.
|
|
|
DIAS Infrared GmbH is well known as a manufacturer of high-quality pyroelectric detectors for temperature measurement, gas analysis and spectrometry. The detectors stand out due to extremely high detectivity as well as low microphonic effect. We provide a product range from single element detectors over multi channel detectors up to linear arrays with 128 or 256 pixels. All the detectors can be equipped with nearly any optical filter as well as with IR fibers.
|
|
optris CT:
General purpose miniaturized IR thermometer with programmable electronic box. The IR sensing head is usable under ambient temperatures up to 180°C without cooling.
Measuring range: -40 - 900°C
Wavelength range: 8-14 µm
Spot size: up from 0,6 mm
Response time: 150 ms
Analog outputs: 0/4-20mA, 0-5V, 0-10V, thermocouple
Digital interface optional: USB, RS232, RS485, CAN, Profibus DP, Ethernet
Exchangeable sensing heads M12x1 , 28 mm length
|
|
• Temperature range: -40 to 1200 °C (several models)
• Small sensing head fits where other sensors can’t
• 1% accuracy across the whole temperature range
• 0/4 – 20 mA, 0 – 5 V, J or K thermocouple output
• Ambient head temperatures up to 85°C without cooling
• Interchangeable sensing heads
• Adjustable emissivity, transmissivity, peak hold …
• 5-digit backlit LCD user interface
• Accessories for cooling and air purging
• Optional RS-232 or RS-485 digital communications
• Multidrop Network (max. 32 sensors with RS-485)
• Special models for glass and metals applications
|
|
Temperature control plays a leading role in most heating applications, both in heat treatment processes and in brazing with soldering material.
CEIA offers a wide range of infrared optical sensors equipped with low-intensity laser aiming which cover a reading range from 75°C, for applications using tin-based alloys, to 1200°C, for brazing carried out with silver, brass or copper.
The CEIA SH Infrared Sensors can be connected to the Power and Master Controller v2 Units to accurately stabilize the heating process at the required temperature values.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
