|
|
Fire Protection Sleeves
Designed to avoid the expenses of fireproof ducting, the sleeves are efficient and cost effective.
Two semi-circular metal shells are lined with intumescent material that when heated expands making a fire barrier.
|
|
The Variacor® system, internationally patented, makes all rigid hosing flexible and multi-directional, whatever may be the pressure.
-Increases pliability of fire hose, less effort due to hose rigidity,
-Makes easier using fire hose in hard to access area,
-Reduces step backwards when handling fire hose.
|
|
New from Tyco Fire Suppression & Building Products, Grinnell's G-Press(TM) Piping System is a complete piping system for a sprinkler fire protection installation, offering lower system costs, shorter installation times, reduced installation waste/clean up and is approved to international fire standards.
G-Press systems have been developed to meet the growing need for quicker, more precise sprinkler pipe installations together with the expectation of increased safety and security.
The range includes G-Press Fittings (using the G-Press Fitting Connection Method), the G-Press Passive Leak Monitoring (PLM) Sealing Ring and the G-Press Tube.
|
|
|
|
|
|
Viking, Saracen & Saxon layflat hoses
Viking fire hoses are chosen by fire fighting professionals throughout the world for their quality, performance and reliability. It is constructed with an all synthetic woven textile reinforcement encased in a blend of high tensile PVC/Nitrile rubber which forms a unified lining and cover. The outer ribbing provides excellent abrasion resistance. Viking fire hose is independently tested to BS 6391 :Type 3 1983 by RAPA Technologies.
Saracen fire hoses are for use where fire fighting is less frequent or intensive. Saracen offers an affordable alternative to Viking without any performance penalty. It is constructed in the same layered way to the Viking though without the heavy protective ribbing, nitrile-PVC is used which makes the hose lighter.
Saxon fire hoses are built to the highest quality, lightweight but with exceptional strength. They are used by fire brigades and industrial users worldwide. Available with a polyeurethane outer coating for extra abrasion resistance or uncoated for lightness, they are ideal as washdown hose.
|
|
Macron produce a comprehensive range of hose fittings in aluminium, gunmetal and other alloys to British, American and other international standards. They can be produced to a customers' specifications in a variety of materials and finishes including polishing, anodising and chrome plating.
-Delivery hose couplings
- Branchpipes and nozzles
- Blank caps and plugs
- Adaptors
- Collection heads and manifolds
- Breechings
- Suction hose couplings and wrenches
- Suction strainers
- Standpipes and hydrant keys
|
|
|
|
|
|
General description : 55 Series
Macron's range of hose reels combine high performance and a rugged space saving design. Manufactured without compromise the 55 Series is renowned for its quality and long-term reliability derived from cutting edge technology and world-class production
55 Series hose reels are available in manual or automatic versions. Manual versions are fitted with a ball or a gate valve. The automatic format actuates as the reel is rotated removing the need for the user to turn on the water supply - an important safety consideration. All models are available with 19mm or 25mm bore hoses.
The range includes fixed and swinging variants. Swinging hose reels are available in right and left hand formats suitable for surface or recess mounting.
55 Series hose reels are manufactured to BS EN 671-1:2001 and carry the CE mark through BSI notified body number 0086.
Features
- Wide range of sizes and capacities
- Easy 'hose-on' installation and maintenance
- Automatic or manual versions
- Bronze axles and nylon bearings for long life and dependability
- Supplied fully assembled
- Fixed reels available with flexible inlet piping
- Optional floor pedestals
- Offshore manual versions
- CE marked
|
|
Macron hosereel cabinets have a space saving design with hose reel and cabinet doors that open a full 180 degrees for ease of access and use. They can be surface mounted or recessed with architrave and are finished in red epoxy powder coat as standard. The cabinets are universal with left or right hand opening and four knock out water entry points per cabinet.
Macron hosereel cabinets are constructed from 16swg zinetec steel with a red recessed latch type handle for an attractive flush finish.
Features
- Door & hose reel swing out a full 180 degrees
- Red expoxy poswer coated standard finish, other colours available
- Solid or glass fronted door
- Stainless steel door option
- Surface or recessed mounting
- Top or bottom water entry
- Right or left hand swinging
- Supplied fully assembled and tested
|
|
Tube: Synthetic rubber blended, black and smooth
Reinforcement: textile braided high tensile synthetic yarn
Cover: special synthetic rubber blended, black or red, weather and ozone resistant
Application: for fire fighting vehicles or use on hose reels for fixed installations.
Temperature: -30℃～+80℃
Length: as request
Packing: P.V.C. film, reel packing available
|
|
APPLICATIONS: For use on hose reels in buildings and factories for first aid fire fighting purposes.
TUBE: Synthetic rubber.
REINFORCEMENT: High tensile synthetic textile filament yarn.
COVER: Red.
COLOR: Ozone and weather resistant synthetic rubber.
SURFACE: Smooth.
OPERATING TEMPERATURE:-20°C - +80°C
|
|
| ... products without technical information |
| |
Tube end forming & machining
Machine with four working stations, either fixed or rotary, suitable for the following operations:
* End forming, only
* Machining, facing, rolling, swaging and trimming, minimising finishing operations with a two-speed additional rotary device.
* Automatic "head-tail" end-forming cycle with auto loader
Automatic loading and unloading devices increase quality and consistency.
The DNC control unit programmes the two axes of the machine for maximum efficiency without requiring manual adjustments.
|
|
FormMaster: Tube Endforming Machines And Cutting Machinery
AddisonMckee manufactures a comprehensive range of tube endforming and cutting machinery suitable for a wide variety of applications. From simple expansion and reduction process tube endforming machine models, to our tube sizing equipment, blade parting machines and our versatile multi-hit ram formers, all of our FormMaster Series (FM) machines are extremely well-built, robust and easy-to-operate, with proven reliability over many years in some of the most demanding production environments throughout the world.
All FM tube endforming machines are available in larger or smaller capacity models with single or multiple heads. Additionally, all of our FM machines can be supplied as stand-alone production units or fully integrated into manufacturing cells with our bending machinery and other process equipment.
|
|
| ... products without technical information |
| |
|
|
|
|
STERN 25 IMS is a real work station for metal tube forming.
Thanks to the 15 different tools that can be fitted, this end forming machine gives the possibility, in the same work cycle, to flare, reduce, end-form, roll-form, face, chamfer, close and thread tubes up to maximum diameter 30 mm.
STERN 25 IMS has 3 controlled axis and a double vice closing system: this is made for stopping also particular kind of tubes, with a big diameter, and allowes to open one or both jaws.
Because of its ease of use, this machine doesn’t require a highly trained operator: so it is perfectly suited even to the most different productive conditions.
Like other Pedrazzoli end forming machines, the STERN 25 IMS too has the IMS control, developed by our R&D Department. The IMS software allows to control all the achievable functions (represented in a graphic way) and carries out automatic optimisation of the work cycles reducing production times to minimum.
This machine can be equipped with automatic loader, two-hand push-button controls with mushroom emergency button and clamping vice pre-closing device.
|
|
Sub-Zero Temperatures From Compressed Air
Using only factory compressed air, ITW Vortec's Vortex Tubes generate temperatures down to -40¢XC for spot cooling in a wide variety of industrial applications and processes. A Vortex Tube separates compressed air into hot and cold air streams, lowering the supplied air temperature by as much as 40¢XC and delivering refrigeration up to 6000 BTUH. With no moving parts to break or wear out, Vortex Tubes offer reliable, maintenance-free operation and easy installation. Various models are available for specific cooling requirements and, at only 150 mm to 330 mm long, they serve as a very compact, cooling component on machinery and equipment.
|
|
|
Meech Stainless Steel Vortex Tubes convert compressed air into two airflows, one extremely cold and the other extremely hot. Compressed air enters the spin chamber tangentially. This causes the column of air inside the tube to rotate at very high speed (up to 1 million rpm). The air at the outside of the column, moving very fast has a lot of energy and is hot. The air at the centre of the air at the centre of the column, moving relatively sowly has little energy and is cold. The hot outer air is bled of off at one end of the tube and and the cold inner air at the other. Vortex Tubes have no moving parts and can produce temperatures as low as 50°C below the inlet air temperature and as high as 110°C.
|
|
|
|
|
|
Vortex Tubes With Metal Generators, Stainless Steel Body:
Vortex Tubes are devices that work on a standard compressed air supply. Air enters the vortex tube and literally splits the air flow into two parts - cold air at one end, and hot air at the other - all without any moving parts.
Vortex Tubes have an adjustable valve at the "hot" end controls the volume of the air flow, and the temperature exiting at the cold end. By adjusting the valve, you control the "cold fraction" which is the percentage of total input compressed air the exits the cold end of the vortex tube.
Inside is the interchangeable brass "generator" which can alter the air used in the vortex tube, and control the temperature ranges you wish to have at the cold and hot ends. There are several ranges of generators for compressed air capacity. There are also two basic types of generators - one to produce the extreme cold temperatures (maximum cold temperature out called the C generator) and one type to produce the maximum amount of cooling (maximum refrigeration called the H generator).
WHY USE Frigid-X Vortex Tubes over others?
Vortex Tubes - Frigid-X are constructed of stainless steel and use a generator and valve made of brass and sealed with viton o-rings to allow their use in the widest range of environments. Others use plastic generators and standard Buna N O-Rings and charge extra for brass and viton. The unique design and quality of materials used in Frigid-XT™ products will deliver years of maintenance-free operation.
Frigid-X™ Vortex Tubes Advantages:
- No moving parts, reliable, maintenance free
- No coolant
- Compact and lightweight
- Low cost application
- Maintenance free units
- Instant cold air in environmental chambers
- No spark or explosion hazard
- Interchangeable generators
|
|
An effective, low cost solution to a wide variety of industrial spot cooling and process cooling needs. Using an ordinary supply of compressed air as it's power source, Vortex Tubes create two streams of air, one cold and one hot, with no moving parts. Cold airflow and temperature are controlled by adjusting the valve at the "hot" end using a simple screwdriver. Temperatures from Temperatures from -40 °F (-40 C) to +250 °F ( 110 C)
VORTEX TUBE ADVANTAGES
- No moving parts, reliable, maintenance free
- Compact and lightweight
- Instant on/off, easy to control, cools without waste
- No spark or explosion hazard
> > > > (SPECIFICATIONS)
- Streamtek Vortex Tubes are constructed of stainless steel and use a generator and valve made of brass. The unit is sealed with viton o-rings to allow their use in the widest range of environments. Others use plastic generators and Buna N O-Rings.
- Air flow rates up to 40 SCFM @ up to 2,800 BTU/Hr Refrigeration.
|
|
|
|
|
|
Compact immersion tubes - Direct bath heating
Production of hot liquids in baths or tanks, heating of aqueous or non-aqueous solutions, for washing, degreasing, pickling, firing, dyeing.
DIRECT HEATING
Positioning of heating equipment in the bath (gas immersion heater).
DECENTRALISED HEATING
Possibility of fitting in existing baths. Autonomy of different processes. Substitute of all or part of centralised heating systems (support of an overloaded installation).
The ease of installation enables better autonomy in different processes, where efficiency is increased and energy costs are reduced.
EFFICIENT HEATING
No loss of time or energy in order to increase the temperature. The only thermal inertia is linked to the volume of the bath. There is a noticeable improvement in the production of hot water in existing electric water-heating tanks by installing a gas immersion heater on a free manhole. The quality of components provides a degree of simplicity and comfort.
COST-EFFECTIVE HEATING
Thanks to the exceptional output of the compact immersion tube (more than 93% of Net Calorific Value), energy costs can be reduced by 20% to 50%. Furthermore, its direct installation in the bath neutralises losses in energy.
COMPONENTS
The equipment is made up of 3 sub-assemblies:
1 -The burner uses a total pre-mixture of air/gas.
2 - The heat exchanger or coil has a developed length and a tube diameter corresponding to the power to be transmitted.
3 - The air/gas pre-mixing line is made up of an air fan and a set of solenoid valves enclosed in a stainless steel sheet housing.
|
|
| ... products without technical information |
| |
|
|
|
|
Air Wipe Blow-Off System - Ring-Blade™:
Air Wipe Blow-Off System - Ring-Blade™ from Nex Flow™ is easy to mount and maintain and reduces both compressed air consumption and noise levels.
It produces a "laminar" flow of air along its 360º angle using the "Coanda" effect which "entrains" a large volume of air from the surrounding area along with the small amount of compressed air from the Ring-Blade™ air-saver wiper-blade to produce an output flow up to 30 times.
Air Wipe Blow-Off System - Ring-Blade™ pay back on compressed air savings can be as soon as a few weeks in some applications when compared to nozzle "rings" or simple annular slots used by other air wiping systems.
Blow-off, cool & clean items like pipe, cable, wire and hose with the Air Wipe Blow-Off System Ring-Blade™ from Nex Flow.
Air Wipe Blow-Off System - Ring-Blade™ Features:
- System is made of coated aluminum to provide even air flow 360º around the part.
- Designed as two pieces hinged together to open and close around the part.
- Instant on-off with no moving parts, no electricity or explosion hazard.
Air Wipe Blow-Off System - Ring-Blade™ Benifits:
- Even blow off around the part, light in weight and compact.
- Easy to install and maintain and allows removal of a continuous piece.
- Reduced compressed air use for energy savings plus lower noise levels.
- Maintenance free with output easily controlled, safe to use.
|
|
• Blower air wipe and air knife systems are designed for any wire size and speed
• Eliminate expensive compressed air and reduce energy usage by 75%
• Products are CE Registered with IEC motors
• Sonic is an ISO 9001:2000 Registered company
• Most Blower/Motor assemblies shipped in 5 days from receipt of order
|
|
Streamtek's Air Wipes provide a uniform 360º airflow ideal for drying, blowoff, cleaning, and cooling of extruded shapes, hose, pipe, cable, wire and more. The unique
FEATURES
- Instant ON/OFF with no moving parts, no electricity or explosion hazard.
- Unique, split design makes it easy to clamp around the surface, eliminating the need for threading.
- Amplification up to 25:1
- Greatly reduces noise (~75dBA)
SPECIFICATIONS
Stainless steel or aluminum are materials of construction. Six standard (inside) diameters: 1" (31mm), 2" (51mm), 3" (76mm), 4" (200mm), 5" (127mm), 6" (152mm). Other sizes available upon request.
|
|
Super Air Wipe™
EXAIR's Air Wipes provide a uniform 360° airstream ideal for blowoff, drying, cleaning, and cooling of pipe, cable,
Five Year Built to Last Warrantyextruded shapes, hose, wire and more. The unique, split design makes it easy to clamp around the surface, eliminating the need for threading.
Two styles are available:
The Super Air Wipe resists corrosion and is ideal for high temperatures up to 800°F (427°C). It is constructed using stainless steel screws, shims along with a stainless steel wire braided coupling hose (for sizes up to 4" (102mm)).
The Standard Air Wipe is a good choice when stainless steel screws and shims are not required. A general purpose PVC coupling hose is included (for sizes up to 4" (102mm)).
|
|
... see all the products in the category
Air knifes
|
|
|
see the results for the following category : 
