|
|
Material generally linked to a fire system which will automatically release the industrial fire doors in case of a fire, by switching the power off.
Electromagnetic holder mounted in a metallic box painted with white epoxy, with cabled local release button, protection level IP42, delivered with an equipped magnetic pin |
|
DICTATOR manufactures electromagnets tested and approved according to the EN 1155:2005.
An extensive product range of electromagnets and professional counter plates
covering most applications.
Holding forces up to 5000N
Voltage: Standard 24 VDC, other tensions also possible
Special designs
- Ex-proof industrial magnets
- IP65
- Magnets with UV-resistant sealing resin for outside applications
- Magnets to be integrated in overhead industrial door closers
- Customized designs
|
|
Actuators suppliers for fire industrial dampers, explosion proof
Electrical, explosion proof quarter turn actuators series ExMax and RedMax, for fire dampers, from 5 Nm to 50 Nm, in acc. with ATEX 94/9/EG for installation in hazardous areas zone 1, 2, 21 and 22, for all kind of gas, vapours, mixtures and dust. Actuators with fail safe spring return function. Spring return up to 15 Nm in 3 or 10 sec., 30 Nm and 50 Nm in 3 or 20 sec. 24 to 230 VAC/DC multivoltage supply, 5 motor running times adjustable on site, on-off, 3-pos, 100 % overload protected, robust aluminium housing with IP 66 protection, optional stainless steel version, integrated heater for use from -40°C to +40°C/+50°C, cable connection, approx. 1 m cable, manual override, squared shaft connection 12x12 mm (size S) and 16x16 mm (size M). series ExMax-... for use in zone 1, 2, 21 and 22. series RedMax-... for use in zone 2 and 22. Optional accessories like external adaptable aux. switches, terminal cases and mounting brackets available. Manufacturers of connector for safety temperature sensor supplier (type FireSafe) for direct connection from sensor to actuator available. |
|
URR
The URR water supplier of nozzle produces a pressurized water spray which canbe continuously adjusted from a powerful straight jet, to a 160° round water curtain with a 11 meter (36 feet) diameter.
Please note the capacity changes in these two extreme operating conditions.
A strong rubber ring circles the diameter immediately behind the orifice, to avoid damages due to shocks.
URS
These lances make it possible to insantly switch among three different conditions, that is closed %u2013 straight jet %u2013 adjustable full cone spray.
The two larger size models can be supplied complete with an optional water curtain, to avoid the fire fighter beoing exposed to radiant heat from the open flame. |
|
FLAME RETARDANT GARMENTS PART OF THE 3-LAYER SYSTEM! Contact with open fire, hot surfaces or radiant heat is a reality in many workplaces. In industry, on construction sites and in many other trades it is important to protect yourself and your employees against these threats. HH Industrial workwear includes an extensive collection of flame retardant garments.
>> Helly Hansen Workwear’s flame retardant industrial clothing is approved for use in environments where there is a risk of incidental contact with open flames or when there is a danger of short term exposure to strong radiant heat. The products should be used with other flame retardant clothing. Please contact us for guidance, to ensure you choose the right flame retardant clothes for your needs.
Base and Thermal Layers
The professional fabric in the flame retardant base layer is 50% flame resistant Lenzing® viscose and 50% wool, which provides insulation as well as flame resistance. The flame retardant viscose fibres have been treated with a mixture of phosphorus and sulphate. The flame retarding treatment is permanent and effective, even after the garments have been repeatedly washed. The combination of wool and viscose provides good insulation properties and a high level of comfort. Flame retardant fibre pile is made of 80% Zirpro®-processed flame retardant wool and 20% flame retardant Trevira SEC®. This process ensures permanent and effective protection. All zips, cuffs, etc, are also made in flame retardant materials. Helly Hansen flame retardant fibre pile has been approved and listed by NATO |
|
Dräger Safety optical flame detection provide the reliable detection of a wide range of both hydrocarbon and non-hydrocarbon based fires. Providing a perfect solution to the ever increasing demand of flame detection throughout industry, they can also be used along with Dräger supplier of gas detection technologies to form part a complete safety system
The reliability and flexibility of Dräger flame detectors, along with their worldwide approvals ensure suitability for just about any application anywhere in the world.
|
|
| Air purifying suppliers of respirators use cartridges or canisters constructed of carbon or paper-based professional filters to remove contaminants or particles from non-IDLH (Immediately Dangerous to Life and Health) environments. Air purifying respirators that rely on the user's inhalation to draw the ambient air over the filters are called negative pressure air purifying respirators. Those that utilize professional blower to pull the ambient air through the filters and then push it to the user are called positive pressure air purifying respirators. Air-purifying respirators have numerous applications from construction and automotive repair to pharmaceutical and oil production. |
|
| ... products without technical information |
| |
| ... products without technical information |
| |
Nexen's line of rugged safety chucks provide roll shaft support and torque transmission at a low cost. The maintenance-free design ensures optimal performance throughout the life of each safety professional chuck. Nexen's units safe-guard your equipment by securing the roll shaft in place during any wind or unwind operation. The safety chucks will only open with the socket in the upright position.
Features include:
Redundant safety mechanisms securely lock shaft in place
Long, maintenance-free life
Manual unlock for most models
Free-turning precision ball bearings
Finger guards on all models
Shaft extension with keyway
Foot or flange mounting
Metric size sockets available upon request
Available in ready-to-assembly brake packages
Ideal for the following industries:
Converting
Printing
Rubber
Film
Foil
Paper
Plastics
Textiles
Rope/cable/wire
|
|
- flange opening is at top central position for easy operator
access, and to avoid the disassembly of the opening button
in the DX or SX safety chucks;
- a safety button first needs to be pushed in before the
flange will open. Designing the button to be pushed
eliminates potential accidental opening by centrifugal force.
- components are finished to a high quality, with the safety
flange being dynamically balanced and chrome plated as
professional standard.
- the professional inserts are replaceable and designed in a variety of
shapes and sizes such as alveolar, square, round-square. |
|
Material generally linked to a fire system which will automatically release the industrial fire doors in case of a fire, by switching the power off.
Electromagnetic holder mounted in a metallic box painted with white epoxy, with cabled local release button, protection level IP42, delivered with an equipped magnetic pin |
|
DICTATOR manufactures electromagnets tested and approved according to the EN 1155:2005.
An extensive product range of electromagnets and professional counter plates
covering most applications.
Holding forces up to 5000N
Voltage: Standard 24 VDC, other tensions also possible
Special designs
- Ex-proof industrial magnets
- IP65
- Magnets with UV-resistant sealing resin for outside applications
- Magnets to be integrated in overhead industrial door closers
- Customized designs
|
|
4B Braime has a large range of equipment for use on elevators and conveyors suppliers in both ATEX & non-ATEX areas.
The PST2000A is a double-ended pullwire mechanism with a casing manufactured from polycarbonate and stainless steel sealed to IP65. Its rugged construction makes it suitable for use in the most arduous environments. The PST2000A will cover a distance of 2 x 50M without intermediate switches and conforms to EN620.
See our website for our full range.
|
|
This device professional monitors the operation process for potentially hazardous conditions and activate an alarm when it is occurred misalignment, the SRT series suppliers of conveyor belt misalignment switch protects the manufacturers of conveyor belt from damage due to belt misalignment or run offB
For normal condition, the belt misalignment switches are generally mounted on both sides and the edge of the conveyor beltB
A small clearance between the contact industrial rollers and a little swaying for the belt edges are allowable.
When the swaying exceeds the normal limit (on/ about 20 mm), the belt edge pushes the contact roller, which drives the switch and operates the contacts, the misalignment switch will reset automatically when the belt resumes normal running.
These control devices are used in pair on each side of conveyor belt detected place, each unit can be equipped with two micro-switches to produce signals indicating the belt misalignment at two deviation pointsB
The first signal point could indicate small belt deviation by sounding an alarm, the second signal point could guard against extreme belt run off by shutting down the conveyorB
The roller is adjustable up to 20‹ in both directions and is positioned approximately 20mm from the conveyor belt , the switch actuation points are adjustable from 0‹ to 35‹ by a simple change of the actuating camsB
The first signal point could indicate small belt deviation by sounding an alarm, the second signal point could guard against extreme belt run off by shutting down the conveyor. The roller is adjustable up to 20‹ in both directions and is positioned approximately 20mm from the conveyor, the switch actuation points are adjustable from 0‹ to 20‹ by a simple change of the actuating cam.
|
|
|
|