|
|
Characteristics
- Single stage horizontal centrifugal pump.
- Horizontally split case.
- Flanged connections.
- Enclosed impellers, double suction provides hydraulic balance reducing axial thrust.
- Clockwise or counter clockwise rotation viewed from coupling side are available.
- Grease lubricated bearings.
Approvals
- Ruhrpumpen's Fire Pumps are listed by Underwriter's Laboratories Inc., and approved by Factory Mutual.
Operation Limits
- Capacity to 568 m3/hr (2,500 U.S. gpm).
- Head to 139 m (455 ft).
- Pressure to 14 kg/cm2 (197 psi).
- Temperature 10°C to 104°C (50°F to 220°F).
|
|
FIRE-FIGHTING UNIT MGA-DJ SERIES
Fire-fighting unit with diesel motor pump and a jockey electric pump.
|
|
Engine Driven Pumps
Hale offers a variety of engine driven pumps ranging from skid units to easy to use portable pumps.
Skid units come in several configurations such as:
Open Cross Mount units - ideal for installation on fire apparatus for wildland, ARFF or pump and roll applications.
Trailer units - Ideal for stand by fire protection where mobility is crucial.
Skids without manifolds - Ideal for permanently installed and stand-by fire protection.
Skids with Manifolds - Idea for permanently installed and stand-by fire protection.
Our portable units are available in floating, HP, and diesel configurations to fit every firefighting need.
|
|
Standard Composition
- 1 IP55 RAL 7032 METAL CASE
- 1 MAIN SWITCH WITH DOOR WITH FUSES
- 1 AC3 class ELECTROMAGNETIC SWITCH
- 1 3-PHASE THERMAL RELAY WITH MANUAL RESET
- 2 TRANSFORMER PRIMARY PROTECTION FUSES
- 1 SAFETY TRANSFORMER FOR LOW VOLTAGE AUXILIARIES
- 1 MAINS VOLTAGE LAMP
- 1 MOTOR RUNNING LAMP
- 1 THERMAL CUTOUT RELEASED LAMP
- 1 TERMINAL BOARD FOR WEEKLY TEST PREPARATION
- 1 AUTOMATIC-Ø-MANUAL SELECTOR
- 1 REMOTE SIGNALLING OF: pump in automatic position, pump excluded, pump in manual position
|
|
Hubbell Fire pump Motor Controllers are designed to comply with the latest standard of the National Fire Protection Association for the installation of stationary pumps for fire protection (NFPA-20).
LXi Microprocessor Logic & Control
Coordinated design engineered, built, tested and labeled by one manufacturer
Suitable for use as service entrance equipment
Full compliment of visual indicators
Communications port
LCD display shows simultaneous reading of all phases for amps and volts, and system pressure
Full range of horsepower ratings and voltages
Ample cable bending space
|
|
XBD-W horizontal type single stage and single absorbs fire pump
|
|
| ... products without technical information |
| |
Calibration Hand Pumps (Pressure & Vacuum)
Types 2911, 2941, LPP 30, LPP 700 and LPP 1000
LPP 30:
Pneumatic up to 35 bar, switcheable to vacuum -0.95 bar
LPP 700 and LPP 1000:
Hydraulic up to 700 resp. 1000 bar
Together with our electronic pressure calibrators you get a "calibration laboratory" in a case.
All Calibration Handpumps supplied with test tube.
|
|
|
From small pneumatic 'bicycle' type pumps to a hydraulic pump that generates up to 15,000 psi (1,000 bar). These are durable pumps with features such as vernier valves, vent valves, manifold connections and swivel fittings, making the pumps ready for your calibration applications.
|
|
Beamex's calibration accessories complete your investment into calibration equipment. Utilizing calibration accessories means an ability to extend configuration possibilities. For instance, by using the external pressure modules you are able to calibrate a wide pressure range with one calibrator.
|
|
Scandura has a complete line of pressure/vacuum generators
PNEUMATIC LINE:
- series BA, vacuum up to 7 bar
- series GPP, vacuum up to 40 bar
HYDRAULIC LINE :
- field use: GHM series, ranges up to 300, 400 e 700 bar
- lab use: GHH, series, ranges up to 700 bar
Scandura’s BA series Pressure Generators play their role at the optimum level.
Its high performances are associated with an excellent price to performance ratio, including long terms performance stability and operating reliability as the market leaders only can ensure.
For large quantity supplies Original Equipment Manufacture (OEM) Agreements are possible with any Distributor/Provider of and Maintenance Process Control Equipment
What are you waiting for, surf in our web-site, visiting the incredible Scandura world!
|
|
|
|
|
|
HTP1 Pressure Test System
1000 bar, 15 000 psi Hydraulic Pressure (compatible with most fluid media) HTP1-700 and HTP1-1000 are lightweight, easy to use and can generate pressures up to 700 bar / 1000 bar, 10 000 psi / 15 000 psi. HTP1 is well suited for calibrating pressure transmitters, pressure transducers, pressure switches and pressure gauges.
Features & Benefits:
Hydraulic Pressure up to 700 bar / 1000 bar, 10 000 psi / 15 000 psi!
Sealed Construction - NO LEAKS ! NO RUST !
Lightweight, hand held and easy to use.
Optional over pressure protection system (via adjustable relief valve)
Quick priming and pressure generation using scissor action pump.
High pressure / priming selector.
Fine adjustment control.
Pressure release valve.
Large see-through reservoir with a capacity of over 100cc.
Compatible with many different liquids. e.g. mineral oil, distilled water. ('Skydrol' / Brake fluid option also available).
Optional accessories include a carrying case, a set of adaptors and a flexible hose with quick fit connectors suitable for many applications.
|
|
|
|
|
|
The hand pump with fine adjustment is a pneumatic compression device for a pressure output from 0 to 16 bar and is operable by hand.
The hand pump is especially suitable to check or to calibrate pressure measuring instruments, as for example load cells, pressure sensors and gauges. The pump is portable because of its compact construction and is to serve handily and easily. A fine automatic controller at the pump enables a fine regulation of the pressure output. The pressure pump was developed for a fast and simple pressure calibration.
The hand pump consists of a cylinder, a piston, a pressure release valve, a fine adjustment and the handles. Over the two available internal threads the pump can be attached to the test normal and the test sample, in order to check or calibrate. The handles have to be pressed and released by hand a few times. As result an initial pressure within an area from 0 to 16 bar or -780 to 0 mbar is produced.
Connect test normal and the instrument which is supposed to be calibrated with the pump by using the flexible hose and the supplied connections. During inflating you close the opening valve in clockwise direction. For pressure relief you turn the opening valve against clockwise direction. Before the calibration of the pressure measuring device each connection should be checked for tightness. After the calibration make sure that the pressure is relieved before unscrewing the instrument (otherwise danger of injury exists).
|
|
| ... products without technical information |
| |
Features:
- Patented CeramPump® Design - One moving part, No Valves.
- Direct Coupled Synchronous Drive - Long term, drift-free accuracy.
- Inert Fluid Path - Excellent solvent compatibility
- Flows from 0-1380 ml/hr
- Kit Includes: Low Dead Volume Fittings, Teflon Tubing, Pulse Suppressor, & Dial Indicator for repeat flow settings of 0.1%
|
|
By using Innovative technologies as AP-TRIX or Cyclo-TRIX, Armen Pump series offers outstanding performance and efficiency for process development and production of pure molecule from milligrams to tens of grams.
Very robust, pulseless high performance piston pumps.
Low pressure or high pressure gradient former available.
Directly controlled through an external keypad or with our AGP Armen Glider Software when integrated with a modular system.
|
|
|
|
|
|
Features:
- High quality components, intelligent mechanical and electronic design, and rigorous quality assurance testing guarantee durable and reliable operations
- Installation, qualification, and performance verification is easy with AutoQ TM equipment qualification tests and predictive performance indicators
- SmartFlow TM technology ensures optimal performance for any flow, pressure, or solvent composition
- All pumps are equipped with an active rear-seal wash system as a standard, not an option
- Patented piston-seal tightness monitoring, self-diagnostics, and pre-programmed test routines help identify problems quickly
- An on-line troubleshooting guide and advanced system status reports facilitate timely resolution of work-flow interruptions
- Easy front-panel access to all fluidic components for routine maintenance and quick replacement without disassembling the instrument
- Unique dual-gradient pump systems provide ultimate flexibility and the benefits of advanced chromatographic techniques without occupying additional bench space
|
|
Low-Cost, High-Performance Isocratic Pumps
Both pumps feature:
- Built-in pulse dampener and rapid refill for pulse-free operation
- Self-flushing pump head for longer seal-life
- Automatic prime/purge system for easy priming
- Wide flow range for broad HPLC work, including semi-preparative applications
- EZChrom driver and cables included
The Model 426 has these additional features:
- User-settable upper and lower pressure limits
- Pressure monitoring on the LCD
- Interfacing features for convenient pump control
|
|
Preparative HPLC Pump 1800
Our powerful pump for preparative chromatography with a 100 ml pump head.
The Preparative Pump 1800 is a versatile HPLC pump with an interchangeable pump head available in different sizes and materials, including non-ferrous, biocompatible versions. This pump delivers constant flows up to 100 ml/min at a maximum pressure of 400 bar and is ideally suited for semi-preparative to preparative HPLC applications, including SMB purposes. Two to four pumps can be combined to create a high pressure gradient HPLC system. As a more cost-effective gradient solution this pump can also be equipped with the optional low pressure gradient valve module which is easily mounted in front of the pump head to deliver reliable and reproducible gradient profiles.
|
|
| ... products without technical information |
| |
Vacuum filters, series FVI
Compatible with pneumatic vacuum generators (venturis) or electric vacuum pumps.
|
|
|
This range of filters has been specifically designed to operate in conditions of almost absolute vacuum. Each filter is individually tested in order to verify its vacuum sealing capacity and the surface treatments applied are capable of ensuring their optimum condition through time. The filter cartridges are interchangeable with those usually used in this field. The filter screen being made of treated paper with filtering capacity of approx. 5 microns. This is sufficient to guarantee the protection of the vacuum generating pumps under normal working conditions. The filter cartridges need to be replaced when they are found to be either clogged or damaged, their replacement being facilitated by the filter closure system. In addition to the shown filter types, on request we also produce filters having special dimensions, with non-standard inlet and outlet caps, or with filter cartridges made of various materials, to meet special requirements.
|
|
|
Headline Vacuum Pump Exhaust filter housings are available in two materials:- Aluminium and Stainless Steel. All housings, other than Model 420, provide a captured outlet for the ducting away of the aerosol-free exhaust if required. The choice between Aluminium and Stainless Steel will depend upon the chemical composition of the exhaust. If the temperature can exceed 120°C, or if corrosive chemicals are present, stainless steel should be used. All housings are rated at 2 bar pressure at their maximum pressure rating.
|
|
The exhaust from oil sealed vacuum pumps is laden with a fine stable oil aerosol. This pollutant must be removed or serious health and environmental damage may be caused.
Headline vacuum pump exhaust filter housings and coalescing elements completely remove oil aerosols from the vacuum pump exhaust. Available in aluminium and stainless steel, the housings are suitable for flow rates up to 765 Nmþ/hr and give complete security, low back pressure and running costs, and exceptional service life.
|
|
|
Headline Vacuum Pump Exhaust filter housings are available in two materials:- Aluminium and Stainless Steel. All housings, other than Model 420, provide a captured outlet for the ducting away of the aerosol-free exhaust if required. The choice between Aluminium and Stainless Steel will depend upon the chemical composition of the exhaust. If the temperature can exceed 120°C, or if corrosive chemicals are present, stainless steel should be used. All housings are rated at 2 bar pressure at their maximum pressure rating.
|
|
Vacuum pumps are used in a variety of applications from manufacturing processes to medical devices. In general, a vacuum pump provides high quality, reliable performance and is a low maintenance piece of equipment. Vacuum pumps convert mechanical energy into pneumatic energy by evacuating the air contained within a system. They use the same pumping mechanism as air compressors except that the unit is installed so that the air is drawn from a closed volume and Exhausted to the atmosphere.
In a compressed air system the compressor inlet is usually at atmospheric pressure, whereas in a vacuum system, the outlet is at atmospheric pressure.
|
|
|
|
see the results for the following category : 
