|
|
Motorised fire dampers effectively prevent fire and smoke from spreading
- Spring-return actuators
- Equipment for control and monitoring (SBS-Control / Bus connection)
- MONICO: Fire protection system
- Control unit for pulse triggering
|
|
General description
The SK140 is a rugged mobile unit designed for one-man operation in the application of low and medium expansion foam. The SK140 can deliver all types of foam concentrate to match the risk being protected and when used in conjunction with a medium expansion foam solution, the unit is an excellent tool for applying vapour suppressing foams.
Application description
Ideal for the protection of oil storage and loading terminals, paint and solvent stores, boiler rooms, ships' engine rooms, helipads, oil rigs and similar high risk locations.
Alternative Fittings
Any low or medium expansion foam branchpipe can be used, along with a variable rate foam inductor. Alternatively, water spray branches can be supplied for use with film forming foam concentrates. International hose couplings can be supplied to customer's requirements.
Marine version includes gunmetal inductors, stainless steel branchpipe and chassis.
|
|
These electromagnetic holding magnets are used in electrically operated independent clamping devices to hold open fire protection doors and exits. The doors are held open either in a fixed position or in a manually adjustable angle until they are electrically released.
Magnets for EX applications with ATEX certification are available.
Size: 42 - 70 mm with quality control
Holding force: 300 - 1568 N by quality controlled
goods
Rated torque: 1.5 - 3.0
|
|
|
|
|
|
Viking, Saracen & Saxon layflat hoses
Viking fire hoses are chosen by fire fighting professionals throughout the world for their quality, performance and reliability. It is constructed with an all synthetic woven textile reinforcement encased in a blend of high tensile PVC/Nitrile rubber which forms a unified lining and cover. The outer ribbing provides excellent abrasion resistance. Viking fire hose is independently tested to BS 6391 :Type 3 1983 by RAPA Technologies.
Saracen fire hoses are for use where fire fighting is less frequent or intensive. Saracen offers an affordable alternative to Viking without any performance penalty. It is constructed in the same layered way to the Viking though without the heavy protective ribbing, nitrile-PVC is used which makes the hose lighter.
Saxon fire hoses are built to the highest quality, lightweight but with exceptional strength. They are used by fire brigades and industrial users worldwide. Available with a polyeurethane outer coating for extra abrasion resistance or uncoated for lightness, they are ideal as washdown hose.
|
|
Macron produce a comprehensive range of hose fittings in aluminium, gunmetal and other alloys to British, American and other international standards. They can be produced to a customers' specifications in a variety of materials and finishes including polishing, anodising and chrome plating.
-Delivery hose couplings
- Branchpipes and nozzles
- Blank caps and plugs
- Adaptors
- Collection heads and manifolds
- Breechings
- Suction hose couplings and wrenches
- Suction strainers
- Standpipes and hydrant keys
|
|
|
|
|
|
General description : 55 Series
Macron's range of hose reels combine high performance and a rugged space saving design. Manufactured without compromise the 55 Series is renowned for its quality and long-term reliability derived from cutting edge technology and world-class production
55 Series hose reels are available in manual or automatic versions. Manual versions are fitted with a ball or a gate valve. The automatic format actuates as the reel is rotated removing the need for the user to turn on the water supply - an important safety consideration. All models are available with 19mm or 25mm bore hoses.
The range includes fixed and swinging variants. Swinging hose reels are available in right and left hand formats suitable for surface or recess mounting.
55 Series hose reels are manufactured to BS EN 671-1:2001 and carry the CE mark through BSI notified body number 0086.
Features
- Wide range of sizes and capacities
- Easy 'hose-on' installation and maintenance
- Automatic or manual versions
- Bronze axles and nylon bearings for long life and dependability
- Supplied fully assembled
- Fixed reels available with flexible inlet piping
- Optional floor pedestals
- Offshore manual versions
- CE marked
|
|
Macron hosereel cabinets have a space saving design with hose reel and cabinet doors that open a full 180 degrees for ease of access and use. They can be surface mounted or recessed with architrave and are finished in red epoxy powder coat as standard. The cabinets are universal with left or right hand opening and four knock out water entry points per cabinet.
Macron hosereel cabinets are constructed from 16swg zinetec steel with a red recessed latch type handle for an attractive flush finish.
Features
- Door & hose reel swing out a full 180 degrees
- Red expoxy poswer coated standard finish, other colours available
- Solid or glass fronted door
- Stainless steel door option
- Surface or recessed mounting
- Top or bottom water entry
- Right or left hand swinging
- Supplied fully assembled and tested
|
|
|
|
|
|
Macron offers a range of medium & low expansion foam branchpipes for all applications.
Our medium expansion branchpipe is capable of producing large quantities of foam in situations requiring rapid foam cover with low water useage. They perform well with high expansion fluoroprotein, multipurpose AFFF and ARC concentrates with the advantage of producing five times more foam with the same amount of water when compared to low expansion foam branchpipes.
Features:
- 200 and 400 litres/minute flow models available
- Lightweight equipment with proven performance
- Pressure gauge shows water pressure at branchpipe
- Range of international couplings available
Our low expansion branchpipe is designed to produce long coherent throws of low expansion foam using all types of foam concentrate. They perform well with protein, fluoroprotein, multi-purpose, ARC, FFFP and AFFF concentrates with the advantage of a longer throw and superior cooling in comparison with medium expansion foam branchpipes.
Features:
- 200 and 400 litres/minute flow models available
- Ball valve as standard
- Self inducing version available
- Range of international couplings available.
|
|
|
|
|
|
The Fomax 7 Hi-Ex Foam Generator:
As it is powered by a water turbine, all that is required for operation is a supply of synthetic foam compound, such as Towalex MB or Plurex high expansion foam and a pressurised water supply (4 bar minimum).
Applications:
Fomax 7 is ideally suited to all total flooding applications such as warehouses, ship holds, engine rooms, machinery spaces, electric cable ducting, chemical processing and refining plants and mines. It's also effective for specialist applications such as blanketing LNG spill fires, controlling vapour release from toxic or flammable liquid spills and the inerting of tanks.
The Fomax 7 SE version is a portable smoke extraction unit, again powered by a water turbine, and is suitable for smoke extraction in hazardous areas.
Features:
- Variable expansion
- Output up to 204m3/min
- Built in bypass system
- Compact unit with recessed controls
- Smoke extractor options
- Easily portable (wheeled model also available)
- Built in handles
- Intrinsically safe operation for hazardous area use.
This unit is sold under the Skum brand.
|
|
|
|
|
|
RED615, member of ABB's 615 product series, is a phase-segregated two-end line differential protection and control IED perfectly harmonized for utility and industrial power systems, including looped and meshed distribution networks with or without decentralized power generation. Re-engineered from the ground up, the new 615 series has been designed to unleash the full potential of the IEC 61850 standard for communication and interoperability of substation automation equipment.
RED615 provides phase-segregated high speed, longitudinal differential protection for overhead line and cable feeders in distribution networks. Two RED615s interconnected over a communication link form an absolutely selective unit protection scheme. Protection of ring-type and meshed distribution networks generally requires unit protection solutions, also applied in radial networks containing distributed power generation.
Due to the ready-made adaptation of RED615 for the line differential protection, the IED can be rapidly set up and commissioned, once it has been given the application-specific IED settings. If the IED needs to be adapted to the special requirements of the intended application, the flexibility of the RED615 allows the IED's standard signal configuration to be adjusted.
|
|
|
|
|
|
The SIPROTEC 4 7SA522 is a distance protection relay for transmission lines. This relay provides full-scheme distance protection and incorporates all functions usually required for the protection of a power line. The relay is designed to provide fast and selective fault clearance on transmission and subtransmission cables and overhead lines with or without series capacitor compensation. The power system star point can be solid or resistance grounded (earthed), resonant-earthed via Peterson coil or isolated. The 7SA522 is suitable for single-pole and three-pole tripping applications with and without tele (pilot) protection schemes.
The 7SA522 incorporates several protective functions usually required for transmission line protection.
• High-speed tripping time
• Suitable for cables and overhead lines with or without series capacitor compensation
• Self-setting power swing detection for frequencies up to 7 Hz
• Digital relay-to-relay communication for two and three terminal topologies
• Adaptive auto-reclosure (ADT)
One of the communication interfaces is system interface for connecting to a control system via IEC 61850 Ethernet protocol.
|
|
The SIPROTEC 4 7UM61 and 7UM62 protection relays can do more than just protect. They also offer numerous additional functions. Be it earth faults, short-circuits, overloads, overvoltage, overfrequency or underfrequency asynchronous conditions, protection relays assure continued operation of power stations. They are compact units which has been specially developed and designed for the protection of small, medium-sized and large generators.
They integrate all the necessary protection functions and are particularly suited for the protection of:
• Hydro and pumped-storage generators
• Co-generation stations
• Private power stations using regenerative energy sources such as wind or biogases
• Diesel generator stations
• Gas-turbine power stations
• Industrial power stations
• Conventional steam power stations.
The combination of functions incorporated in the 7UM62 also offers excellent all-round protection for transformers, large asynchronous motors, synchronous motors.
|
|
The 7SD610 relay is a differential protection relay suitable for all types of applications and incorporating all those functions required for differential protection of lines, cables, transformers and busbars. Transformers and compensation coils within the differential protection zone are protected by means of integrated functions, which were previously to be found only in transformer differential protection. It is also well-suited for complex applications such as series and parallel compensation of lines and cables.
It is designed to provide protection for all voltage levels and types of networks; two line ends may lie within the protection zone. The relay features very high-speed and phase-selective short-circuit measurement. The unit is thus suitable for single-phase and three-phase fault clearance.
Digital data communication for differential current measurement is effected via fiber-optic cables, networks or pilot wires connections, so that the line ends can be quite far apart.
|
|
|
LS overload relays are designed for the easy mounting directly to contactors or separately by using additional bases or brackets.
|
|
| ... products without technical information |
| |
|
|
|
|
The first self-testing obstacle warning light
The new range of TWINY obstacle warning lights is made of a master and a slave beacons. The "slave" is automatically working as soon as the "master" is down. This design is securing the obstacle beaconing, since the system will be permanently operational. The Twiny range also includes a dimmer switch which will automatically switch on and off the lights during day and night time.
Furthermore, the TWINY range has a unique and specific self testing device, working daily or on request according to customer specifications. The test procedure check the two beacons conditions. If ever one of the light test is negative, a defect contact will report the information. The testing procedure is visible from the ground (no need to reach the beacons to start or witness the test).
Three types of low intensity obstacle warning lights are available within the TWINY range: the BA10 incandescent lights, the LED BA15 lights as well as the Neon BA20 and BA30 types.
|
|
Round Wire
For use in lightning protection and earth-termination systems according to DIN EN 50164-2 (VDE 0185 Part 202).
|
|
| ... products without technical information |
| |
|
|
|
|
Steel Telescopic Covers
Beakbane Steel Telescopic Covers are designed to protect machine tool slideways and are precision-built for optimum efficiency. Over the last three decades, Beakbane has developed and refined its design know-how and understanding of the requirements of machine tool builders to the point where it is an acknowledged international leader in its field.
The protection of machine tool slideways is essential if machine tool accuracy is to be maintained, down time reduced, and associated maintenance costs avoided.
By working closely with machine tool builders and adjusting quickly to the demands of the latest technology, Beakbane Steel Telescopic Covers have become an integral part of many machine tool designs. We cannot stress too strongly the importance of the cover requirements being considered at the design stage if maximum efficiency and cost benefits are to be achieved.
Our computerised design programme provides data for the precision manufacture of Beakbane Covers. This ensures instant recall of all information needed for repeat orders: also, as an indication of the precision in our manufacturing procedures, it enables us to replace a damaged 'box' in a cover when required.
The individual boxes that make up each cover are interlinking, and depending on the box structure, can be sufficiently rigid to support the weight of an operator when the cover is stationary.
Wiper seals are fitted, as required, to the leading edge of all boxes with the exception of the smallest. The wiper is pressure loaded so preventing the ingress of swarf and other unwanted foreign bodies. The wiper itself is made from hardwearing polyurethane or nitrile rubber, protected in its own steel case from hot chips and swarf.
|
|
ARNOLD of bellows are in the true sense of the word "flexible ".
This concerns in particular the possibility for each application of customers a solution by structure to find legally protected construction procedures and material authority.
Our bellows consist from the principle of a technical fabric, which is form-giving supported by plastic frameworks.
|
|
Stainless steel lamella : particulary resistant to sparks and shavings.
Following application, we can offer others solutions
|
|
Bellows
Arnold bellows offer safe protection for both people and machinery. These are the products to soke your problems - in which material, stability and shape can be individually customised.
If the bellows will be subjected to high mechanical stress and strain, the telescopic covers provide safe protection even at high processing speeds. Due to our patented mounting system, the telescopic covers will either be flexibly mounted or connected with the bellows without the use of adhesive materials under consistent counter pressure, if required and can also be coolant-compatible, if this is desired.
|
|
The variety of materials we use, the shapes and the colours, make SPM sleeves apt for any activity sector:
- Worker protection: cutting tables, ladle screws, laser rays, dials etc.
- Mechanism protection: robot arms, jack rods, sliders etc.
- Decoration: industrial design, contemporary furniture, architecture, fashion
In all cases we would be happy to assess and produce the bellow sleeve that is right for your particular application.
|
|
|
|
|
|
The first self-testing obstacle warning light
The new range of TWINY obstacle warning lights is made of a master and a slave beacons. The "slave" is automatically working as soon as the "master" is down. This design is securing the obstacle beaconing, since the system will be permanently operational. The Twiny range also includes a dimmer switch which will automatically switch on and off the lights during day and night time.
Furthermore, the TWINY range has a unique and specific self testing device, working daily or on request according to customer specifications. The test procedure check the two beacons conditions. If ever one of the light test is negative, a defect contact will report the information. The testing procedure is visible from the ground (no need to reach the beacons to start or witness the test).
Three types of low intensity obstacle warning lights are available within the TWINY range: the BA10 incandescent lights, the LED BA15 lights as well as the Neon BA20 and BA30 types.
|
|
Round Wire
For use in lightning protection and earth-termination systems according to DIN EN 50164-2 (VDE 0185 Part 202).
|
|
| ... products without technical information |
| |
SPRAY MATIC series Impregnation-Spraying Machine
(SPRAY MATIC 250/100, 300/300, 300/400, 300/600)
Spraying machine made for applying solvent or water based impregnating products, on square, rectangular, circular or shaped wooden profiles or beams.
The items are at first impregnated with the atomised product and then brushed to remove any excess primer. The result is uniform treatment and colouring of all the surfaces of the profile, without smears or stains.
|
|
Vacuum-Pressure Impregnation Plants mod. IMP-VAC
(IMP-VAC 4- 6- 7- 8- 10 -12)
It is composed by two autoclaves laid one upon the other or by a single autoclave subdevided in two chambers.
The two tanks contain respectively the preservative and the wood to treat.
|
|
|
|
see the results for the following category : 
