|
|
|
|
|
|
Hygood Sapphire Fire Protection Systems
Environmentally friendly fire extinguishing systems
Hygood Sapphire™ Systems,using 3M™ Novec™ 1230 Fire Protection Fluid have emerged as the solution of choice for fire extinguishing systems to protect high value assets and processes. Sapphire is a clean agent system which is proven to be environmentally friendly.
Novec 1230 fluid, delivered by Sapphire fixed systems from Hygood, complies with all statutory requirements,both current and anticipated.
Crucially, Sapphire Fire Extinguishing Systems are designed specifically for Novec 1230, the efficacy of which has been demonstrated by independently witnessed fire tests. It is listed as “acceptable without restrictions” by the US Environmental Protection Agency’s Significant New Alternatives Policy (SNAP) and is registered under Europe’s ELINCS scheme. The Sapphire system has been approved by LPCB, UL and FM, all major marine classification societies and is included in EN15004, NFPA 2001 and ISO 14520. Compare its properties with those of other chemical extinguishing agents and you will appreciate why Sapphire Fire Extinguishing Systems provide the best long-term solution to protect what really matters to you.
Benefits
• Sapphire Systems are custom engineered for Novec 1230
• Zero ozone depletion potential
• Global warming potential of one
• Clear, colourless, low-odour agent
• Simple to refill
• Discharges within 10 seconds
Applications
• Telecommunications sites
• Computer centres
• Museums and archives
• Oil and gas industry sites
• Power generation sites
• Civil and military marine
• Rail and mass transit
|
|
|
|
|
|
Hygood FM-200 Gas Fire Protection
Hygood FM-200 is internationally accepted as providing an ideal fire protection solution for people, property and the environment.
Electrically non-conductive, it occupies minimal storage space. It's primary action is through cooling the fire and removing heat energy so that the combustion process cannot be sustained.
As far as people's exposure to Hygood FM-200 is concerned, safety is not an issue. In fact, FM-200 is even used as a replacement for CFC propellants in pharmaceutical inhalers, which is why Hygood FM-200 systems are approved by UL and LPCB.
When it comes to property, Hygood FM-200 is a trusted choice in clean agent fire protection, perfect where disruption has to be minimised and survivability of the business is critical. Hygood FM-200 is clean, leaving behind no oily particulates, water or corrosive materials. This virtually eliminates any risk of damage to delicate equipment caused by the extinguishant itself.
Finally, the environment is not at risk: Hygood FM-200 has a zero effect on the earth's stratospheric ozone layer and has a minimal impact on the environment in comparison to the impact of a catastrophic fire.
It's a fire protection solution that has already been applied in more than 1000,000 situations worldwide in more than 70 countries.
|
|
|
|
|
|
Hygood Carbon Dioxide Fire Suppression System
A fire in your facility is never pleasant. But, it doesn’t have to be debilitating. Carbon dioxide, the original 'clean agent,' is still an economical solution, providing automatic or manual protection for Class A, B or C fires.
The only gaseous agent capable of deep seated Class A hazard protection, versatile Co2 can flood enclosed areas or discharge directly onto burning surfaces.
Hygood High Pressure Carbon Dioxide Systems are especially effective for non-occupied hazards such as semiconductor wet benches, control rooms and paint lines. Whatever the application, from cylinder to nozzle, each system is custom-designed for your specific fire hazards.
Hygood Co2 systems have been proven effective in numerous non-occupied applications:
• Commercial and industrial fryers
• Dip tanks
• Electric generators
• Electrical panels
• Marine applications
• Spray booths
• Waste disposal equipment
• Gas turbines
• Coal silos
• Hazardous material storage
• Quench tanks
• Semiconductor wet benches
• Computer room subfloors
• Non-occupied control rooms
• Paint lines
• Wave solder machines
• Machining operations
• Hose reel stations
• Transformer vaults
• Dust collectors
• Printing presses
• Inerting systems
|
|
Skum fire fighting foam concentrates provide a range of solutions to every situation, providing rapid fire knockdown, heat resistance and vapour suppression so the at the fire is securely and efficiently extinguished with no chance of re-ignition.
Whatever the risk, Skum foam concentrates can protect a variety of applications:
- Tankers & marine, including solid fuel & grain carriers, vehicle ferries & the engine rooms & machinery spaces of all vessels
- Aviation including helidecks
- Warehouses and hangars
- Oil & petrochemicals including tank farms
- Power stations.
|
|
Skum offers a range of electrical and manual fog/jet, water/foam monitors with exceptional flow characteristics. Our product range includes:
FJM-80 - a portable solution for foam/water discharge, used for fast response to fire incidents involving flammable liquid spills and vapour suppression
FJM-WTO - self oscillating units by internal water driven turbines with a low weight
FJM-MAN - manually operated monitors available for a number of alternate mounting positions, optimising throw range with delivery of water or foam in jet form or as a spray pattern
FJM-EL - remote control operation, with electric motor driven elevation and rotation movement.
|
|
Skum HotFoam (TM) - an innovative and proven fire protection solution for enclosed spaces, including tunnels, aircraft hangars & warehouses.
The HotFoam system is not only efficient and swift when it comes to combating fires in enclosed spaces, it also considerably reduces the risks of secondary damage as it has a low water content. When activated, a fine water spray fog provided by the system ensures a very fast temperature knock-down. Following this, the foam will totally flood the protected area in a matter of minutes and submerge the fire, as well as excluding the air needed for further combustion.
HotFoam technology is an excellent solution for a wide range of applications including:
- Petrochem production & storage facilities
- Machinery spaces onboard ships and oil rigs
- Process plants
- Warehouses
- Underground storage facilities
- Aircraft hangars
- Power plants
- Cable tunnels
|
|
The RAFT range of trailers & fire fighting equipment is designed to deliver an effective fire fighting solution to the scene of a fire incident as quickly as possible.
We can offer a range of performance options and alternative features which can be specified to match your own needs & expectations, ranging from the size of the foam tank (1000 - 2300 litres) through to manifold design & nozzle types, and including hose and fire fighting fittings specifications. We are happy to assist in the design of a RAFT solution.
|
|
|
|
|
|
Hygood i3 Advantage
i3 Inert gas fire suppression systems with the 'Advantage' of constant flow technology.
i3 Advantage is an inert gas total flooding fire suppression solution designed to protect spaces enclosing high value assets and processes. i3 Advantage systems use Hygood's patented Constant Flow Technology for dramatically improved performance, and reduced protected room pressure.
What is 'Constant Flow', why is it a uniquely better solution?
i3 Advantage systems have unique valve technology which, for the first time, works to smooth out the gas discharge. We call this 'Constant Flow Technology'. The standard system has a pressure 'spike' on discharge, normal for most inert gas systems. Although these systems meet the requirements of ISO14520 and EN15004 our engineers recognised that a more even discharge could offer real benefits for installers and users alike. In this discharge the constant flow technology eliminates the pressure spike and delivers a lower pressure into the pipework system, furthermore the constant (reduced) flow into the protected enclosure, lowers the over pressurisation effect, reducing the size of the over pressurisation venting required in the enclosure.
Benefits
• Typical system cost savings of 10-20%
• Eliminates need of high pressure pipe work
• Reduced room venting requirements
• Reduces internal room turbulence on discharge
• Effective against virtually all combustible materials and flammable liquid fires
• Ideal where an environmentally acceptable agent is required
|
|
New from Tyco Fire Suppression & Building Products, Grinnell's G-Press(TM) Piping System is a complete piping system for a sprinkler fire protection installation, offering lower system costs, shorter installation times, reduced installation waste/clean up and is approved to international fire standards.
G-Press systems have been developed to meet the growing need for quicker, more precise sprinkler pipe installations together with the expectation of increased safety and security.
The range includes G-Press Fittings (using the G-Press Fitting Connection Method), the G-Press Passive Leak Monitoring (PLM) Sealing Ring and the G-Press Tube.
|
|
|
|
|
|
Total portable fire extinguishers
-Wet Chemical Portables (for cooking oil & fat fires)
There are always potential fire risks in kitchens, mass catering outlets and food production factories where flammable cooking oil and fats can flare up in an instant.
A most important key feature of this unit is the unique nozzle applicator which enables the user to apply the agent from 3 - 4 metres away from the fire, greatly reducing danger from the eruptive nature of burning oils and fats.
Primary uses would be in the catering industry, canteens, hotels, fast food outlets and industrial food production for local protection as well as households, laboratories, workshops, offices, shops, garages and industrial plants.
Key product features:
• Designed for universal use against A class fires and specifically for F class cooking oil and fat fires.
• Suitable against cooking oil and fat fires F class extinguisher according to newest version of EN3-7
• Safe for inadvertent use on electrical equipment (up to 1000v at 1m distance)
• Squeeze grip control valve allows total control of the discharge
• Pressure gauge for permanent pressure control
• A test valve is located behind the pressure gauge, ensuring a leak free seal and ease of maintenance
• Internal corrosion protected with 1mm PE coating
• Container with external thread for protection of anti-corrosive coating, even in threaded area
• High corrosion protection for entire unit, inside and out
• Swirl-effect, multi-spray nozzle for optimal droplet size and projection range
• Steel cylinder finished in high quality polyester powder coating, free of Cadmium and Triglycid Isocyanurate
|
|
|
|
|
|
Total portable fire extinguishers
-Standard Foam and Eco Range Portables
The latest standard foam fire fighting portables from TOTAL offer fast and effective knock down and are particularly suited to Class B fires based on petrochemical derivatives, oils and fats. They are also reliable and very safe, with no particulates or harmful residues. They have no effect on the earth’s ozone layer.
In the Eco Range portables, the foam is totally encapsulated in an internal cartridge and is only mixed when discharged. This has the benefit of considerably extending the life of the foam concentrate over that of standard premix foams, making servicing much easier and eliminating disposal concerns.
• Offices, schools, shops and flammable liquid storage are examples of typical applications.
• Swirl-effect, multi-spray nozzle for optimal droplet dimension and projection range
• Internal corrosion protected with 1mm PE coating
• Safe for inadvertent use with electrical equipment (up to 1000v, minimum distance 1m)
• Pressure gauge with permanent pressure control
• A test valve is located behind the pressure gauge, ensuring a leak free seal and ease of maintenance
• High corrosion protection for entire unit, inside and out
• The Foam concentrate is separated in special cartridges (S6 AKP model only). This gives the unit a very high level of environmental protection, makes it service friendly and maximises the life of the foam concentrate
• When the extinguisher is pressurised, the foam will be instantly ready mixed (S6 AKP model only)
|
|
|
|
|
|
Total portable fire extinguishers
-Standard Powder Portables (mixed risk class A, B and C fires)
TOTAL standard powder agent extinguishers offer the widest range of suitabilities as they can tackle A, B and C class fires, including flammable gas, making them the appropriate choice for areas of mixed fire risks.
These units are particularly suited to flammable liquid fires as well as flammable gas fires, such as methane, propane, hydrogen and natural gas. The 1kg and 2kg versions are available for cars, boats and home protection with a sturdy bracket for wall mounting.
Key product features:
• High fire rating enhances safety margins
• Safe for inadvertent use on electrical equipment (up to 1000v at 1m distance)
• Pressure gauge with permanent pressure control
• Squeeze grip control valve allows total control of the discharge
• PG1E / PG2E are specially designed for single handed use (for example, in the case of a car fire)
• A test valve is located behind the pressure gauge, ensuring a leak free seal and ease of maintenance
• Specialised production technology for powder extinguishant - high flow, moisture resistant
• Steel cylinder finished in high quality polyester powder coating, free of Cadmium and Triglycid Isocyanurate
• Rubber padded wall bracket protects coating (6 and 9 kg)
• Vehicle bracket included with sturdy fastening strap on request.
|
|
Total portable fire extinguishers
-Special Risk Range Portables
Including:
• Powder portables for metal fires
• Powder portables for coal dust fires
• Tandem portables for automatic and portable operation
• Anti-magnetic Co2 portables for medical equipment environments
• Water portables for smouldering sawdust fires
• Wet chemical portables for cooking oil and fat fires
• Foam portables for polar liquid fires
|
|
|
|
|
|
Total portable fire extinguishers
-Standard Water Portables
Water is the traditional antidote to fire, but this well established principle is brought right up-to-date with optimal bead dimension, impressive projection and delivery cessation.
There are two versions:
• standard
• anti-freeze protected
Designed for universal use against A rated fires of solid matter, such as wood, paper, straw, coal and textiles. Typical applications would be farm storage, paper mills and processing, wood working and machining and fabric handling and upholstery facilities.
Key product features:
• High ratings rating enhances safety margins
• Safe for inadvertent use on electrical equipment (up to 1000v at 1m distance)
• Squeeze grip control valve allows total control of the discharge
• Internal corrosion protected with 1mm PE coating
• High corrosion protection for entire unit, inside and out
• 1-tip nozzle for optimal droplet size and projection range
• Steel cylinder finished in high quality polyester powder coating, free of Cadmium and Triglycid Isocyanurate
• Pressure gauge for permanent pressure control
• A test valve is located behind the pressure gauge, ensuring a leak free seal and ease of maintenance
• Rubber padded wall bracket protects coating
|
|
|
|
|
|
Viking, Saracen & Saxon layflat hoses
Viking fire hoses are chosen by fire fighting professionals throughout the world for their quality, performance and reliability. It is constructed with an all synthetic woven textile reinforcement encased in a blend of high tensile PVC/Nitrile rubber which forms a unified lining and cover. The outer ribbing provides excellent abrasion resistance. Viking fire hose is independently tested to BS 6391 :Type 3 1983 by RAPA Technologies.
Saracen fire hoses are for use where fire fighting is less frequent or intensive. Saracen offers an affordable alternative to Viking without any performance penalty. It is constructed in the same layered way to the Viking though without the heavy protective ribbing, nitrile-PVC is used which makes the hose lighter.
Saxon fire hoses are built to the highest quality, lightweight but with exceptional strength. They are used by fire brigades and industrial users worldwide. Available with a polyeurethane outer coating for extra abrasion resistance or uncoated for lightness, they are ideal as washdown hose.
|
|
Macron produce a comprehensive range of hose fittings in aluminium, gunmetal and other alloys to British, American and other international standards. They can be produced to a customers' specifications in a variety of materials and finishes including polishing, anodising and chrome plating.
-Delivery hose couplings
- Branchpipes and nozzles
- Blank caps and plugs
- Adaptors
- Collection heads and manifolds
- Breechings
- Suction hose couplings and wrenches
- Suction strainers
- Standpipes and hydrant keys
|
|
|
|
|
|
General description : 55 Series
Macron's range of hose reels combine high performance and a rugged space saving design. Manufactured without compromise the 55 Series is renowned for its quality and long-term reliability derived from cutting edge technology and world-class production
55 Series hose reels are available in manual or automatic versions. Manual versions are fitted with a ball or a gate valve. The automatic format actuates as the reel is rotated removing the need for the user to turn on the water supply - an important safety consideration. All models are available with 19mm or 25mm bore hoses.
The range includes fixed and swinging variants. Swinging hose reels are available in right and left hand formats suitable for surface or recess mounting.
55 Series hose reels are manufactured to BS EN 671-1:2001 and carry the CE mark through BSI notified body number 0086.
Features
- Wide range of sizes and capacities
- Easy 'hose-on' installation and maintenance
- Automatic or manual versions
- Bronze axles and nylon bearings for long life and dependability
- Supplied fully assembled
- Fixed reels available with flexible inlet piping
- Optional floor pedestals
- Offshore manual versions
- CE marked
|
|
Macron hosereel cabinets have a space saving design with hose reel and cabinet doors that open a full 180 degrees for ease of access and use. They can be surface mounted or recessed with architrave and are finished in red epoxy powder coat as standard. The cabinets are universal with left or right hand opening and four knock out water entry points per cabinet.
Macron hosereel cabinets are constructed from 16swg zinetec steel with a red recessed latch type handle for an attractive flush finish.
Features
- Door & hose reel swing out a full 180 degrees
- Red expoxy poswer coated standard finish, other colours available
- Solid or glass fronted door
- Stainless steel door option
- Surface or recessed mounting
- Top or bottom water entry
- Right or left hand swinging
- Supplied fully assembled and tested
|
|
|
|
|
|
Macron offers a range of medium & low expansion foam branchpipes for all applications.
Our medium expansion branchpipe is capable of producing large quantities of foam in situations requiring rapid foam cover with low water useage. They perform well with high expansion fluoroprotein, multipurpose AFFF and ARC concentrates with the advantage of producing five times more foam with the same amount of water when compared to low expansion foam branchpipes.
Features:
- 200 and 400 litres/minute flow models available
- Lightweight equipment with proven performance
- Pressure gauge shows water pressure at branchpipe
- Range of international couplings available
Our low expansion branchpipe is designed to produce long coherent throws of low expansion foam using all types of foam concentrate. They perform well with protein, fluoroprotein, multi-purpose, ARC, FFFP and AFFF concentrates with the advantage of a longer throw and superior cooling in comparison with medium expansion foam branchpipes.
Features:
- 200 and 400 litres/minute flow models available
- Ball valve as standard
- Self inducing version available
- Range of international couplings available.
|
|
General description
The SK140 is a rugged mobile unit designed for one-man operation in the application of low and medium expansion foam. The SK140 can deliver all types of foam concentrate to match the risk being protected and when used in conjunction with a medium expansion foam solution, the unit is an excellent tool for applying vapour suppressing foams.
Application description
Ideal for the protection of oil storage and loading terminals, paint and solvent stores, boiler rooms, ships' engine rooms, helipads, oil rigs and similar high risk locations.
Alternative Fittings
Any low or medium expansion foam branchpipe can be used, along with a variable rate foam inductor. Alternatively, water spray branches can be supplied for use with film forming foam concentrates. International hose couplings can be supplied to customer's requirements.
Marine version includes gunmetal inductors, stainless steel branchpipe and chassis.
|
|
|
|
|
|
The Fomax 7 Hi-Ex Foam Generator:
As it is powered by a water turbine, all that is required for operation is a supply of synthetic foam compound, such as Towalex MB or Plurex high expansion foam and a pressurised water supply (4 bar minimum).
Applications:
Fomax 7 is ideally suited to all total flooding applications such as warehouses, ship holds, engine rooms, machinery spaces, electric cable ducting, chemical processing and refining plants and mines. It's also effective for specialist applications such as blanketing LNG spill fires, controlling vapour release from toxic or flammable liquid spills and the inerting of tanks.
The Fomax 7 SE version is a portable smoke extraction unit, again powered by a water turbine, and is suitable for smoke extraction in hazardous areas.
Features:
- Variable expansion
- Output up to 204m3/min
- Built in bypass system
- Compact unit with recessed controls
- Smoke extractor options
- Easily portable (wheeled model also available)
- Built in handles
- Intrinsically safe operation for hazardous area use.
This unit is sold under the Skum brand.
|
|
New from Tyco Fire Suppression & Building Products, Grinnell's G-Press(TM) Piping System is a complete piping system for a sprinkler fire protection installation, offering lower system costs, shorter installation times, reduced installation waste/clean up and is approved to international fire standards.
G-Press systems have been developed to meet the growing need for quicker, more precise sprinkler pipe installations together with the expectation of increased safety and security.
The range includes G-Press Fittings (using the G-Press Fitting Connection Method), the G-Press Passive Leak Monitoring (PLM) Sealing Ring and the G-Press Tube.
|
|
Tyco Fire Suppression & Building Products' UNI Channel systems have been recently reviewed into one comprehensive product line that can offer solutions to every construction issue. As well as a range of conventional fittings, you could choose our fast fix system, saving you time and money.
The UNI Channel system offers 4 channel types, varying in thickness and produced in different lengths. Imprinted length markings and serration inside the channel to ensure a better grip of the channel nut have been introduced, and the development of a new Kwik-Fix nut allows fast installation.
- One range of channels can be used conventionally or with the fast fix system
- One type of Kwik-Fix nut for all channel types
- Complete range of fittings and and accessories for support structures
- Accessories for making beam or concrete connections
|
|
Tyco Fire Suppression & Building Products' support systems are a result of close co-operation between manufacturer, engineer, distributor and customer. The support systems range comprises:
- Unistrut metal framing products and the new Kwikstrut fittings
- Wopf pipe supports
- Suspension fasteners
- Electrical supports including cable & basket trays and cable ladders.
We can assist you with the design of your installation, help with material take-off and selection of the right product for the right application. If you have a large project, ask for our software calculation package.
|
|
|
|
|
|
The Grinnell grooved mechanical products range offers a complete & dependable way of executing the mechanical engineering installations in a structure.This applies not only to fire protection systems,but also to heating,air conditioning & ventilation installations.They are found wherever reliable operation is the key factor, even in power stations & other demanding construction projects.Our service also includes the assistance of specialists to offer guidance on the optimum use of these products.
The Grooved Method
Grinnell couplings and grooved-end fittings are universally used for joining grooved end pipe in a wide variety of piping systems.They are designed to provide a self-centering joint which accommodates the application of pressure, vacuum & other external forces, while limiting the burdensome need for special supports, expansion joints etc.
Flexible and Rigid Couplings
Flexible couplings provide designed in clearances between the housing key sections & the pipe grooves to permit both angular and longitudinal movement of the pipe.Rigid Couplings provide a rigid, locked-in pipe connection. Rigidity is attained simply; it is built-in.The Rigid System is based on a technologically advanced housing design that conforms to and grips the pipe.Couplings are available in painted & galvanized finish.
Range of fittings
Grinnell grooved fittings are available through 600mm/24" nominal pipe size in a variety of styles.These fittings are designed to provide minimum pressure drop & uniform strength. Depending on style and size, fittings are provided in various materials including malleable iron,ductile iron,stainless steel,forged steel or segmentally welded steel.
|
|
Macron produce a comprehensive range of hose fittings in aluminium, gunmetal and other alloys to British, American and other international standards. They can be produced to a customers' specifications in a variety of materials and finishes including polishing, anodising and chrome plating.
-Delivery hose couplings
- Branchpipes and nozzles
- Blank caps and plugs
- Adaptors
- Collection heads and manifolds
- Breechings
- Suction hose couplings and wrenches
- Suction strainers
- Standpipes and hydrant keys
|
|
The Skum bladder tank foam proportioning system is used to induce foam concentrates into water system with variable flows and/or pressure. A bladder tank has no moving parts and requires the minimum of maintenance.
The system is ideal for upgrading a water sprinkler system to a foam/water sprinkler system. Constant proportioning , irrespective of flow, is achieved by a pressure balance between the foam liquid in the bladder and the water in the system flowing over the proportioner.
|
|
Sammy(R) Screw benefits:
- Installs in less than half the time of drop-in anchors
- Single piece design, no nut and washer to assemble
- Suitable for concrete, steel and wood based materials
- Concrete installation requires smaller diameter drill bits than traditional drop-in anchors
- FM and/or UL approved
- Easily removable/replaceable
- Close to edge fixing giving high performance values
- Can be fixed closer together than traditional anchors without reducing performance values
- Self tapping in concrete and cuts its own thread in wood and steel
- Low cost condrive kits allow fast installation
- Allows vertical and horizontal installation in hard to reach locations
- Premium corrosion protection
- Shallow embedment gives flexibility in steel, concrete and wood.
|
|
|
|
|
|
Viking, Saracen & Saxon layflat hoses
Viking fire hoses are chosen by fire fighting professionals throughout the world for their quality, performance and reliability. It is constructed with an all synthetic woven textile reinforcement encased in a blend of high tensile PVC/Nitrile rubber which forms a unified lining and cover. The outer ribbing provides excellent abrasion resistance. Viking fire hose is independently tested to BS 6391 :Type 3 1983 by RAPA Technologies.
Saracen fire hoses are for use where fire fighting is less frequent or intensive. Saracen offers an affordable alternative to Viking without any performance penalty. It is constructed in the same layered way to the Viking though without the heavy protective ribbing, nitrile-PVC is used which makes the hose lighter.
Saxon fire hoses are built to the highest quality, lightweight but with exceptional strength. They are used by fire brigades and industrial users worldwide. Available with a polyeurethane outer coating for extra abrasion resistance or uncoated for lightness, they are ideal as washdown hose.
|
|
... see all the products in the category
Hoses
|
|
|
