|
|
Parker's 5500 Self-Sealing Brass Couplings are used in fluid-transfer applications for easy maintenance on refrigeration and air-conditioning systems. Applications can also include marine refrigeration and air-conditioning systems, along with split refrigeration systems.
* Self-sealing upon disconnection maintains minimum inclusion of air and loss of fluid.
* Brass coupling provides corrosion resistance.
* Final metal-to-metal seal provides low leakage.
* Copper-sweat connections provide basic ends for brazing and eliminate the need for flux, simplifying the installation process.
* Panel mounting options are available for the unique needs of a unit.
Parker's FD57 Stub Kit Couplings are used in fluid-transfer applications for easy maintenance on factory pre-charged heat pump and split air conditioning systems.
* Easy installation of replacement units.
* Direct copper brazing capability.
* UL recognized
|
|
|
Tompkins Brass Adapters are made from CA360 Brass/Schedule 40. Rolled threads and one-piece design is perfect for all air/water-lower pressure applications (up to 2000psi) and Temperature ranges of -65 F to +250 F. Available in SAE 45 degree, JIC 37 degree, Hose Barb, compression, poly-flow, pipe, inverted flare, and poly-push with the broadest selection of jump sizes and configurations in the industry. Meets or exceeds all SAE standards.
|
|
The Stratoflex Products Division designs and manufactures crash-worthy fuel breakaway valves for aerospace and derivative markets.
Proven lifesavers, breakaway valves separate under crash loads on the fluid lines exceed a predetermined value. Upon separation, the valves automatically seal the fluids in the lines to effectively prevent spills.
Typical installations include fuel lines, main fuel tanks, extended range aircraft auxiliary fuel tanks, air-to-air refueling systems, and fall-away external tanks. Tank vent lines often use the single-valve versions.
|
|
|
Tompkins Forged Steel Adapters are made from carbon steel. These high-quality, one-piece adapters are finished in five color zinc dichromate and value priced. Perfect for applications with working pressures from 1,000 to (or up to) 10,000 psi and temperature ranges of -65 degrees F to +250 degrees F. Widest availability of jump-sizes and configurations in the industry. Meets or exceeds all SAE standards.
|
|
99 KL series
With the 99 KL series, both the coupling as well as the plug are filled with a dry-break valve system. During the connection process, the plug and the coupling seals before both valves open. The valves close simultaneously when disconnected, allowing the coupling and plug to be seperated afterward. This ensures minimum leakage. It cannot be connected with any other design in this series. All invidual parts are electro-burnished.
Advantages
Coded via two lateral grooves on the plug and a similar guide in the coupling, which are arranged in different angular degrees. The 8-way coding is standard.
Applications
Mechanical engineerring, plant machinery, chemistry
|
|
|
|
|
|
Raccordi di giunzione (couplings) per trasporti pneumatici, a gravità o in aspirazione.
raccordo serie "IL" per trasporti sino a 2 bar con guaina esterna in acciaio INOX 304 e bloccaggio viti in Nylon 6, fascia intermedia in acciaio INOX 304 e guarnizione in gomma bianca o nera con fascetta INOX di continuità elettrica.
raccordo serie "SL" per trasporti sono a 6 bar con guaina esterna zincata e bloccaggio viti con piatto zincato 30 x 4 mm, fascia intermedia zincata e guarnizione in gomma bianca o nera con fascetta INOX di continuità elettrica.
raccordo serie "SP zincata" per trasporti sono a 6 bar con guaina esterna zincata e bloccaggio viti con piatto zincato 30 x 8 mm, fascia intermedia zincata e guarnizione in gomma bianca o nera con fascetta INOX di continuità elettrica.
raccordo serie "SP INOX 304" per trasporti sono a 6 bar con guaina esterna in acciaio INOX 304 e bloccaggio viti con piatto zincato 30 x 8 mm, fascia intermedia in acciaio INOX 304 e guarnizione in gomma bianca o nera con fascetta INOX di continuità elettrica.
|
|
|
We provide a large range of cutting-ring technology, including single-edged cutting rings as well as proven double-edged rings and even modern, soft-sealed cutting rings.
|
|
FLAT FACE couplings have been designed for all those applications where, for safety reasons or environment care, it is absolutely necessary not to leak oil during connection and disconnection. Characterized by an extreme ease of cleaning, they are the ideal product for applications in dusty and dirty environment. Conformity to ISO 16028 and HTMA standards ensures the worldwide interchangeability.
Applications
Connection of:
• hydraulic tools for rescuing
• hydraulic tools for agriculture machines
• hydraulic tools for forestry machines
• hydraulic tools for earth moving machines
• hydraulic tools for road machines
• components in chemical plants
• components in charge plants for technical gases
• components in food industry plants
• temperature control systems for plastic and metal casting
• hydraulic components for industrial applications
• hydraulic systems for special vehicles
|
|
- Working pressures up to 4.200 bar / 60,000 psi.
- Large orifices at rated pressures.
- Closed types with integrated check valves or open types.
- Excelent flow capacity performance.
- High quality stainless steel.
- Suitable for fluids and gases.
- Direct- and in line mounting
WE ARE LOOKING FOR A DISTRIBUTOR IN ITALY. Please contact us if you are interested!
|
|
|
The FF49 Series quick couplings provide rugged-flushface valving for non-spill dry breaks, and allow one-hand push-to-connect with safety sleeve-lock standard. The 3/8" size meets HTMA dimensional standards while providing significantly higher pressure containment than other brands (10,000 operating psi). The 3/4" FF49-6 and FF49-6-12 are rated at 6,000 operating psi and have a significantly smaller footprint than other brands. Ideally suited for use in hydraulic hand tools, overhead bucket hoists, skid-steer loaders, and wherever spillage can constitute a safety or environmental hazard.
|
|
Technical Description
The TEMA high pressure coupling was specially developed for use in industrial machinery, salvage devices and testing equipment. This series is galvanised and produced in steel. The plug part and the sleeve are hardened and galvanised in steel. The coupling can be supplied either with or without additional safety lock.
Flow Capacity
Advantages
High flow as a result of optimised valve design. Additional plug sealing via polymer valve casing, to guarantee high reliability seals even with second-hand plugs. TEMA high pressure couplings are supplied with dust caps inclusive!
Working Pressure
1000 bar
|
|
Simultaneous connection of several lines is an important feature extendable to various fields of application.
The MULTIFASTER MULTICONNECTIONS allow a dramatic reduction of connection time, the absence of fluid spillage and air inclusion during connection and disconnection, even under pressure, without any risk of lines misalignment.
Applications
Connection of:
• hydraulic tools for agriculture machines
• hydraulic tools for forestry machines
• hydraulic tools for earth moving machines
• hydraulic tools for road machines
• components for hydraulic test benches
• temperature control systems for plastic and metal casting
• hydraulic components for industrial applications
• hydraulic systems for special vehicles
|
|
Morris pipe couplings
- The original compression coupling
- Easy to install
- Substantial and reliable construction
- Competitive pricing
- Electrical conductivity guaranteed
- Available for practically every pipe diameter
|
|
Fittings: The range of fittings for steel pipes, for PE pipes and threaded fittings covers all the needs of Industrial and Plumbing Industries.
The big NEWS is "TOF Multipinza" range for multilayer pipes, allowing the use of EFFEBI fittings with all the types of tools (TH - U - H - F- B) for multilayer pipes.
|
|
Quick coupling system „Storz“ for use in potentially explosive atmospheres
- Fixed coupling with internal thread
- Fixed coupling with external thread
- Blank cap with chain
- Hose coupling
- Turning coupling with internal thread
- Turning coupling with external thread
- Fixed coupling with locking pawl
- Hose coupling with locking pawl
- Blank cap with cylinder lock
|
|
|
|
|
|
48 KB series
The 48 series coupling system made of POM and PVDF has been developed for use in the medical, chemical, food handling, pharmaceutical and laboratory technology industries. The coupling is also available in a completely thermoplastic version (RectuChem ). Here the metal springs are replaced by springs made of PEEK, an extremely resistant synthetic material.
Advantages
The coupling is fitted with a double shut-off valve which enables it to be connected to a single shut-off (non-valved) plug as well as a double shut-off (i.e. plug with valve). The coupling is also available as a straight through coupling (valved plug).
Application
Medical engineering, dental equipment, measuring and control equipment, laboratory, pharmaceutical.
Working Pressure : PB = 0 - 10 bar (POM, bei 20°C), PB = 0 - 8 bar (PVDF, springs made of steel), PB = 1 - 8 bar (PVDF, springs made of PEEK), maximum static working pressure with safety factor of 4 to 1.
Working Temperature: -20°C up to 80°C (POM), -20°C up to 120 (PVDF), depending on the medium.
|
|
Cepex offers two ranges of PP compression fittings: Performance Series and Standard Series. Both are made according to standards EN 712 / 713 / 715 / and ISO 3501 / 3503 / 3458 /3459, and are suitable for installation on PE pipes conforming to ISO 11922; DIN 8072 / 8074; and UNE 53131. These fittings allow for a quick, simple insertion of the tube, considerably reducing installation time: simply loosen the nut (without removing it), and insert the pipe.
|
|
|
SafeWay’s S40 Series is a general purpose, double shut-off fluid transfer quick coupling available with either a rugged ball valve or leak-free, high flow poppet valve. The S40 was the first two-way (double acting) sleeve quick coupling, introduced by SafeWay in 1969 as our first product. The S40 Series is widely used wherever the ease and convenience of one-hand connection or disconnection is desired. It is original equipment on a wide variety of agricultural and mobile equipment.
|
|
STANDARD SERIES couplings are the simplest and most commonly used. Faster's Standard Series are specifically designed to satisfy a wide range of applications and conform to ISO 7241 A and B parts standards ensuring worldwide interchangeability.
Applications
* Hydraulic tools for rescuing
* Hydraulic tools for agriculture machines
* Hydraulic tools for forestry machines
* Hydraulic tools for earth moving machines
* Hydraulic tools for road machines
* Components in chemical plants
* Components in charge plants for technical gases
* Components in off-shore plants
* Components in food industry plants
* Temperature control systems for plastic and metal casting
* Hydraulic components for industrial applications
* Hydraulic systems for special vehicles
|
|
Quick Couplings
As the manufacturer of Hansen™ Couplings, the innovator of the quick coupling, and Coupleurs Gromelle™, with its wide range of European style couplings, Tuthill Coupling Group offers the broadest range of quick coupling lines in the industry. By adding QUICK SEAL® leak testing connectors to our product lines we have rounded out our offerings to handle all of your coupling needs.
Our quick couplings are available in over 6,000 configurations. They are available in brass, stainless steel, steel, plastic, and in a wide range of sizes. We provide quick couplings to meet the needs of every industry
|
|
The Stratoflex Products Division designs and manufactures Indi-Lok quick connect valved couplings for aerospace and derivative markets. Our Indi-Lok couplings quickly connect and disconnect with self-sealing action and superior performance during operation and maintenance of fluid systems.
Indi-Lok couplings have a unique locking feature that provides secure, positive, and visual, lock indication.
Indi-Lok couplings are compatible with all standard and many exotic fluids currently used in today’s aerospace and derivative markets.
|
|
|
SafeWay’s S56 Series is a general purpose, double shut-off quick coupling capable of containing a wide variety of fluids. This series can be found anywhere a dependable connection and disconnection of a fluid transfer line is required. Rugged construction and low pressure drop make this series ideal for a variety of applications including plant maintenance equipment, skid-steer loaders, snow plows, mining, dump trucks, gooseneck trailers and chemical transfer lines.
|
|
Quick-release couplings purposely designed for AGRICULTURAL APPLICATIONS. Most part of models are approved and used by major manufacturers of tractors and agricultural machines in the world. Conformity to ISO 7241 part A and ISO 5676 standards ensures the worldwide interchangeability.
Applications
* Hydraulic tools for agriculture machines
* Hydraulic tools for forestry machines
* Hydraulic braking systems for trailers
|
|
Quick release couplings AIR CONDITIONING AND REFRIGERATION series are available purposely designed and manufactured to be used on air conditioning, refrigeration, temperature control and climate systems, both industrial and mobile.
Characterized by medium working pressure, these products are characterized by screw connection system and are interchangeable with similar models available on the market.
Applications
Connection of:
• components in charge plants for technical gases
• components for domestic air conditioning systems
• components for industrial air conditioning systems
• components for mobile air conditioning systems
• components for electronic devices cooling
• components for industrial refrigeration systems
• components for mobile refrigeration systems
|
|
|
Airflex Rotorseals allow passage of pressurized fluids from a stationary inlet to a rotating shaft end. Single, dual and triple passage rotorseals are available in a variety of sizes and designs to meet most flow requirements. The multiple passage units can be used for individual control of components mounted on the same shaft, component lubrication and circulating fluid systems.
|
|
VARIOUS OF SANITARY/HYGIENIC PRODUCTS,
FULL MACHINED, HIGH POLISHED,
APPLYING ON FOOD, PHARMACEUTICAL, IC VACUUM INDUSTRY.
# STANDARD UNION, FERRULE CLAMP & FITTINGS
BODY: SS304, SS316, SS316L
ENDS: 3A, BS, AS, NZS, SMS, DIN, RJT, CIP, IDF.., ETC.
SURFACE: 180, 220, 420 AND MIRROR OR ELECTRIC POLISHED FINISHED
|
|
APPLICATIONS
Multi-purpose shut-off stops for domestic potable water systems.
Patterns include angle and straight with multiple inlet and outlet configurations.
MATERIALS & CONSTRUCTION
• Oversized chrome plated handle
• Heavy duty chrome plated one piece forged brass body
• Precision machined brass stem and ball
• Patented one-piece “shut off system” for Series 7105 stops
• Specially design seats
• Support clip for thermal stability
• 100% seat and shell tested to insure no leakage for the life of the valve
DESIGNCRITERIA
• All valves rated at 125 PSI CWP
• CSA B125
• ASME A112.18.1M
• ASTM D2846 for CPVC end connections
• ASME F1806 for PEX ends
• CSA and IAPMO listed*
• NSF/ANSI 61-9 Compliant*
• Each valve individually tested in ISO 9001 certified facility
* Applicable for specific valves
|
|
FEATURES
Screw thread retaining mechanism to
eliminate brinelling
Connection and disconnection can be performed
even with a low residual hydraulic pressure in the line
APPLICATIONS
Mobile plant, agricultural implements and general
industrial equipment.
MATERIALS
Zinc plated carbon steel body material with nitrile seals
and PTFE backing ring.
STAINLESS STEEL
Holmbury High Pressure Poppet Type Screwed
Couplings are available in stainless steel. Please
contact the Holmbury Sales Dept to discuss the
application.
TECHNICAL DETAILS
Working temperature range with nitrile seals is
-20°C to +100°C
Couplings are also available with Viton seals for an
operating temperature range of -15°C to +180°C.
|
|
SCREW SERIES couplings are suitable for all those heavy duty applications characterized by pressure and flow peaks and possibility of connection and disconnection under residual pressure.
Threaded connection ensures a wider contact surface in the mating area with consequent higher resistance to pressure peaks, hoses bending and vibrations .
Applications
Connection of:
• hydraulic tools for rescuing
• hydraulic tools for agriculture machines
• hydraulic tools for forestry machines
• hydraulic tools for earth moving machines
• hydraulic tools for road machines
• hydraulic systems for special vehicles
|
|
|
|
