Blocking valves control the opening and closing of piping systems. They control the inlet, flow or outlet of liquids and gases. Flow valves regulate the volume flow of the fluid used. We have throttle valves, throttle check valves, check ...
RIEGLER & Co.KG
Diameter: 5 mm - 100 mm
With the standard-fitting-system according to DIN ISO 12151-2 and DIN ISO 12151-3 we offer benefits to assemble swage fitting with the applicable ferrule with or without skiving, according to the standards ...
Quick couplings made of brass, steel and stainless steel Mono- and Multicouplings Flat-Face-Couplings Safety couplings Temperature control couplings Hydraulics, pneumatics, water, gas
Diameter: 80 mm - 1,200 mm
Kolk flanged fittings are made of ductile iron GJS-400/500 (DIN1693 GGG-40/50). Designed acc. to EN 545, flange drilling acc. to EN 1092-2 (ISO 7005-2). Epoxy coated (Resicoat®) acc. to EN 14901 (DIN 30677-2) and GSK ...
Diameter: 1.6, 2.3, 3.2 mm
Operating pressure: 1 bar
Connect and loosen with a "click" - without drops or air bubbles. The valve closes automatically when it is disconnected. Advantages: • Drip protection, thanks to integrated locking valve • Closed system, for drip-free separation • ...
Diameter: 48.3 mm - 168.3 mm
... Temperature range: -20°C to 180°C). All diameters and designs available plus accessories (strip inserts, stiffening rings, fitting pliers, tensioning straps) can be obtained from the technical manual. Construction ...
STRAUB Werke AG
HYDRAULIC INDEX : *HYDRAULICS FITTINGS (STEEL AND STAIN) * STAIN FITTINGS * CLAMPS * STELL FITTINGS SERIES 100 AND 250 KG BRIGGS AND SOCKET WELDING 3000 AND 6000 IBS * ...
NORMYDRO
Diameter: 6 mm - 38 mm
NORMYDRO
NORMYDRO
The Model 346GF Emergency Breakaway Coupling (EBC) cleanly comes apart and closes both separated halves when an axial load greater than 200 ±-50 lbs. at 0 to 450 gpm is applied. It is used by the US Navy at ground-based refueling facilities ...
Fini air treatment systems for industry are composed of refrigerating dryers, filters for separating impurities, condensate drain cocks, water-oil separators, tanks and all other components necessary for adapting the compressor room to ...
FINI
... procedure • AUTOMATIC TIGHTENING LIMIT: contact between AR3-FORM® ring and fitting body because of the nut tightening effect compels the operator to stop tightening • CUTTING RING FITTINGS INTERCHANGEABILITY: ...
Rastelli Raccordi
TN 400 fittings have the following points of strength: • Minor change in cross section • Negligible pressure loss • Taper to DIN 3865 • Appropriate for extreme load conditions • Low tightening torque • ...
Rastelli Raccordi
Rastelli Raccordi manufactures 37° fittings for flared tubes in carbon steel and stainless steel in compliance with SAE J 514/ISO 8434-2. The particular features of the SAE J 514 – 37° fittings for ...
Rastelli Raccordi
Diameter: 0.25 in - 4 in
Operating pressure: 40 bar
Host connection for thread-stud, suitable for flexible hoses, both for high and low pressure. As required (in accordance with the stud and material), The personalised design of the piece will be studied, in which case it will be considered ...
Diameter: 58.7 mm
Operating pressure: 20 bar
Irrigation connector F inlet and F outlet, DIN 2999 threaded Cod. G64.01 Irrigation elbow for hydrant connection
Diameter: 4 mm - 22 mm
Operating pressure: 190 bar
Long description - Braze banjo Metric SBM - Technical information - Acc. DIN 7622.
Kramp
Diameter: 16 mm - 75 mm
Clamping connector / screw connector without support tube for optimum grip and durability. The product group A3 is just right for anyone who wants to work fast, cost-effective and space-saving. The separate sealing and clamping function ...
BEULCO GmbH & Co. KG
... plated for corrosion resistance • Captured o-ring style fitting ensures a leakproof fit • Solderless joint technology eliminates voids and potential leaks • Bimba manufactures custom fittings, contact ...
Bimba
Diameter: 2 mm - 16 mm
Operating pressure: -100,000 Pa - 1,000,000 Pa
KQ2 one-touch, metric and inch size fittings are available in a wide variety of sizes, body styles and thread types. The use of a special profile seal allows the KQ2 to be used for a wide range of pressures from a low ...
SMC Corporation of America
Diameter: 5 mm
Operating pressure: 8 bar - 35 bar
Quick coupling system with nominal diameter 5 for pneumatic and fluid handling applications up to 35 bar. Coupling system with the world's most popular profile in this nominal diameter. Available made of brass or stainless steel. Parker's ...
Parker Fluid System Connectors Division Europe
Diameter: 0.5 in - 6 in
Operating pressure: 5.2 bar - 103 bar
Alfa Laval Hygienic BS 4825 tubes and fittings provide high cleanliness standards when product integrity, quality and safety are critical to your processing systems. Smooth, crevice-free and corrosion-resistant, these ...
Alfa Laval
Operating pressure: 0 psi - 6,250 psi
... RX Fittings are always designed to match the respective Parker hoses, assuring an ideal combination and hose assemblies serving our customers needs reliably and efficient. Feature/Benefits: • The fitting ...
Parker Polyflex Division - Europe
Diameter: 1 in - 12 in
Fixed Flanges ASME or EN 1092 or TTMA or JIS Material: Carbon Steel, Stainless Steel Ferrule: Carbon Steel, Stainless Steel
Trelleborg Couplings & Accessories
Diameter: 0.75, 0.5 in
Operating pressure: 10 bar - 14 bar
Parker's Garden hose fittings connect garden hose to other garden hose, to pipe or to tubing. Hose end threads are 3/4" garden hose thread. Swivel connectors allow hose to twist without kinking. Hose barb ends for use ...
Parker Stratoflex
Diameter: 0.875 in
Operating pressure: 700 psi
ZoomLock MAX refrigerant press fittings provide a faster, cleaner, safer connection using a braze-free, flame-free, refrigerant piping solution for HVACR systems. Parker ZoomLock MAX refrigerant press fittings ...
Parker Refrigeration & Air Conditioning
Dayu Water Saving Group Co., Ltd. was established in 1999. It is a national high-tech enterprise based on the Chinese Academy of Water Sciences, the Science and Technology Promotion Center of the Ministry of Water Resources, the Chinese ...
DaYu Water-saving Group Co.,Ltd.
Diameter: 6 mm - 38 mm
... Seal (ORFS) Fittings and Adapters, Seal-Lok for CNG, provide reliable fuel conveyance with an elastomeric seal compound made of hydrogenated nitrile. Tested and certified by TUV for applicable industry standards, these ...
Parker Tube Fittings Division
Diameter: 6 mm - 41.3 mm
Description For connecting copper and/or steel tubes with identical tube outer diameters.
VULKAN LOKRING Rohrverbindungen GmbH & CO. KG
Y-piece Y-pieces are very sensitive to wear and tear. Building them completely from elastomers results in a flexible and wear-resistant construction.
Please specify:
Help us improve:
remaining