socket fitting / elbow / hydraulic / thermoplastic
socket fitting
TUBE series

Safe and reliable surface installations can be set up with the cable conduit accessories shown on this page, using the conduits themselves, couplings for distribution assemblies and boxes, and wall fastening accessories. These rigid conduits, ...

screw-in fitting / straight / elbow / hydraulic
screw-in fitting
SMART series

Diameter: 16 mm - 50 mm

... connection elements: 90° elbow, straight joint, joint for pipe-box connection and joint for pipe-sheath connection. The new fitting does not have assembled parts and the seal is directly overmoulded onto the body, thus ...

screw-in fitting / straight / hydraulic
screw-in fitting
Adaptaflex®

Adaptaflex® is a global leader in flexible metallic conduit and offers one the industry's widest selection of cable management products and solutions. Features Strength and Flexibility: Adaptaflex conduit is strong, flexible and ...

See the other products
Thomas & Betts
screw-in fitting / elbow / hydraulic / plastic
screw-in fitting
Carlon® series

Diameter: 0.25 in - 0.5 in

... most complete line of non-metallic elbows and fittings in the electrical industry, with products designed for use above- and below-ground. Features Ease of Installation: Non Metallic elbows and fittings ...

See the other products
Thomas & Betts
rotating fitting
rotating fitting
ISO-KF, CF-F series

Liquid Feedthroughs ISO-KF / CF-F * For H2O and LN2 * Thermically insulated * Especially suited for very hot and very cold applications

See the other products
INFICON
flange fitting / 90° angle / for vacuum / aluminum
flange fitting
ISO-KF series

Diameter: 10, 40, 25, 16 mm

Elbow 90° - Aluminum INFICON ISO-KF fittings are manufactured according to ISO 2861/1, DIN 28403 and Pneurop 6606. Our quality fittings are the standard components for all vacuum and high vacuum applications. ...

See the other products
INFICON
screw-in fitting / straight / hydraulic / high-pressure
screw-in fitting
AQx series

Diameter: 0.25 in
Operating pressure: 21750 psi - 43500 psi

Ultra high pressure systems requires high demands on the quality of the involved components. Therefore you should always choose REHOBOT approved accessories. (1) Removal of nipple AAU436 gives G1/4" internal thread with 120° sealing ...

barbed fitting / straight / pneumatic / swivel
barbed fitting
5282 series

Diameter: 16, 0.38 mm

Swivel nipple coupling. Avoids the hose wrapping around the handle. For fitting bear directly onto the nipple. In accordance with NF EN 560.

socket fitting / straight / hydraulic / EMC
socket fitting
C

The C compression unit are used together with CF 8 ES and CF 8 & CF 32 EMC frames when CM ES and CM PE modules are used. For PE installations the C compression unit IP/PE AISI 316 is used and in ES installations the C compression unit ...

screw-in fitting / straight / pneumatic / dielectric
screw-in fitting
1/2 - 1", 250 psi | 3008

Diameter: 0.25 in - 1 in
Operating pressure: 17.23 bar

1/2, 3/4, and 1 in. (15, 20, and 25mm) Description: Series 3008 Dielectric Unions are used in commercial and residential applications to prevent accelerated corrosion and deterioration in the piping system due to galvanic and stray current. ...

See the other products
Watts Water Technologies
screw-in fitting / T / hydraulic / brass
screw-in fitting

Ideal for use with copper, brass, aluminum or welded steel hydraulic tubing that can be flared on gasoline, grease, oil, water, vacuum, air, L.P. and natural gas lines. Not recommended for use with polybutylene or soft plastic tubing. ...

See the other products
Watts Water Technologies
standard fitting / screw-in / snap-in / pneumatic
standard fitting
30 series

Diameter: 3 mm - 28 mm
Operating pressure: -1 bar - 15 bar

... and pressure feeds. Rotatable screw connections with ball bearings allow for installation in high speed machines. Plug fittings with locking connections, available as straight or angled models, prevent the loss of ...

See the other products
FIPA GmbH
miniature fitting / screw-in / snap-in / pneumatic
miniature fitting
30.9, 31.0 series

Diameter: 3 mm - 6 mm
Operating pressure: -1 bar - 15 bar

The mini-models of the FIPA screw connections and plug-in connectors for compressed air and vacuum in the range from -1 to 10 bar are 40 per cent smaller than the standard version. They are available with M-, R- or G-external or internal ...

See the other products
FIPA GmbH
weld-on fitting / T / hydraulic / copper
weld-on fitting
Monoflo series

... baseboards, free-standing radiation or convectors. Only one fitting is needed for most installations for adequate diversion for upfeed radiation. For most applications, a second fitting can be used ...

socket fitting / elbow / hydraulic / brass
socket fitting
C x C - Cast 806

Diameter: 4 in

The NIBCO® cast bronze DWV 45-degree elbow is used in residential and commercial drain, waste and vent systems. Dezincification resistant ASTM B584 Alloy C84400 ASME B16.23 Size 4”

See the other products
NIBCO
socket fitting / elbow / hydraulic / brass
socket fitting
C x C x C - Cast 807-9

Diameter: 3, 2 in

The NIBCO® cast bronze DWV 90-degree side inlet elbow is used in residential and commercial drain, waste and vent systems. Dezincification resistant ASTM B584 Alloy C84400 ASME B16.23 Size 3” x 3” x 2”

See the other products
NIBCO
socket fitting / 5° angle / hydraulic / stainless steel
socket fitting

Diameter: 78 mm - 627 mm

Pipe bends R = 2 D up to 250 mm diameter are produced out of pressed shells, for diameters 300 to 400 mm out of pressed segments. In use this means an optimization of flow and a better wear protection. Bends with a diameter of more ...

See the other products
Fr. Jacob Söhne GmbH & Co. KG
socket fitting / 90° angle / hydraulic / stainless steel
socket fitting

Diameter: 76 mm - 299 mm

Pipe bends R = 2 D up to 250 mm diameter are produced out of pressed shells, for diameters 300 to 400 mm out of pressed segments. In use this means an optimization of flow and a better wear protection. Bends with a diameter of more ...

See the other products
Fr. Jacob Söhne GmbH & Co. KG
weld-on fitting / elbow / pneumatic / stainless steel
weld-on fitting
.TEG2C series

PRODUCT: Stainless Steel fittings comply with ASME BPE standards. Gaskets are made from compounds which are FDA approved and USP 87, 88 Pharmaceutical Class VI certified. SIZES: Stainless Steel fittings ...

See the other products
EGMO LTD.
weld-on fitting / elbow / pneumatic / stainless steel
weld-on fitting
TEG2K series

Diameter: 0.25 in - 6 in

PRODUCT: Stainless Steel fittings comply with ASME BPE standards. Gaskets are made from compounds which are FDA approved and USP 87, 88 Pharmaceutical Class VI certified. SIZES: Stainless Steel fittings ...

See the other products
EGMO LTD.
screw-in fitting / straight / hydraulic / stainless steel
screw-in fitting
FF100G

Diameter: 100 mm
Operating pressure: 40 bar - 64 bar

The FF-G series manufactured by FG Inox is a mechanical components which can be used for wide range of application. The unit can cove with different model unit having different dimension and sizes. For its weight, it can come with a model ...

See the other products
FG INOX
screw-in fitting / straight / hydraulic / stainless steel
screw-in fitting
FF20B

Diameter: 20 mm
Operating pressure: 40 bar - 64 bar

The FF-SW series from FG INOX is a stainless steel threaded fitting.

See the other products
FG INOX
push-in fitting / straight / elbow / T
push-in fitting
FC100 series

Diameter: 6, 4 mm

Push-in fittings with double sealing gasket, metal release sleeve and TM4 treatment Usable with these pipes: PA6, PA11, PA10, PA12, PTFE, Polyethylene , Polyurethan Available in : (with gauged diameter) ...

See the other products
Olab
push-in fitting / straight / elbow / T
push-in fitting
F100 FLASH

Diameter: 4 mm - 12 mm

Push-in pneumatic fittings Usable with these pipes: P6A, PA11, PA10.12, PA12, PTFE, polyethylene , polyurethan Available in: (with gauged diameter): ø4mm – ø6mm-ø8mm-ø10mm-ø12mm

See the other products
Olab
push-in fitting / U-shaped / pneumatic / plastic
push-in fitting

Diameter: 36, 14 mm

Hose coupling Ø36mm, 3 Outlet Ø14mm Order-No.: 5107281

See the other products
BAK Thermoplastic Welding Technology Ltd.
socket fitting / T / hydraulic / plastic
socket fitting

Diameter: 36, 19 mm

See the other products
BAK Thermoplastic Welding Technology Ltd.
screw-in fitting / T / hydraulic
screw-in fitting
WYES series

Diameter: 40 mm - 150 mm

The wyes are made primarily of aluminum alloy in a heat - treated, fire engine red finish. This light weight and smaller design minimizes friction loss by up to three times.

screw-in fitting / straight / pneumatic
screw-in fitting

Operating pressure: 9.8 bar

The Global Sentinel Inert couplers have been designed to provide quick setup and removal of welding equipment. A simple safety lock assures the single push system a precise and sound fit. The automatic gas plus gives you easy control ...

straight fitting / pneumatic / security
straight fitting
Sentinel Safety- Z

Operating pressure: 0.01, 9.8 bar

The Sentinel Safety-Z uses a unique reverse disconnect feature that will not come apart with a straight pull. This feature prevents accidental release of the coupler even when pulled over the edges of steel plates. The Sentinel Safety-Z ...

crimp fitting / straight / elbow / hydraulic
crimp fitting

Operating pressure: 6000 psi

... called as MF is one of the comprehensive model configurations of the series. This type of fitting is made up with a high-tech swaged fitting that is created for the wire spiral and braid hoses. It caters ...

See the other products
MANULI HYDRAULICS
barbed fitting / straight / elbow / pneumatic
barbed fitting

Manuli offers a wide selection of both standard and custom made fitting termination ends for refrigeration applications. A range of bevelled to weld fittings with integrated inserts and ferrules are ...

See the other products
MANULI HYDRAULICS
weld-on fitting / hydraulic / stainless steel
weld-on fitting
ART. 110 series

Diameter: 0.25 in - 6 in

According to Table: DT-22 Sulfur: ≤ 0,017% SF-1 Int. finishing: Ra ≤ 0,4 µm Machined Finish Ext. finishing: Ra ≤ 0,8 µm Machined Finish SF-4 Int. finishing: Ra ≤ 0,4 µm Electropolished Ext. finishing: Ra ≤ 0,8 µm Electropolished

See the other products
RATTIINOX SRL
weld-on fitting / hydraulic / stainless steel
weld-on fitting
ART. 115 series

Diameter: 0.5 in - 6 in

SF-1 Int. finishing: Ra ≤ 0,4 µm Machined Finish Ext. finishing: Ra ≤ 0,8 µm Machined Finish ML Int. finishing: Ra ≤ 0,4 µm Machined Finish Ext. finishing: Ra ≤ 0,8 µm Mirror Polished

See the other products
RATTIINOX SRL
screw-in fitting / T / pneumatic / plastic
screw-in fitting

Swivel Tee-adaptors with cylindrical thread form MADLER are made from super quality PBT plastics. The threaded T-joint is made from brass with nickel plating to make them durable and corrosion resistant. These adapters have multi-purpose ...

screw-in fitting / elbow / hydraulic / brass
screw-in fitting

Mädler GmbH manufactures swivel elbow adaptors with an angle of 90°. This type of swivel elbow adaptor is a long version, which has a taper thread. The material used in the construction of this product is brass with nickel plating.