|
|
Stainless Steel Unions
- monoflow and duoflow (available) design
- self-supported rotating union
- radial or axial (available) housing connection
- industrial seal combinations:
Carbon Graphite/Ceramic - standard
Tungsten Carbide/Ceramic - E.L.S.
- wetted parts made of 316 stainless steel
- suitable for the food, chemical & pharmaceutical industries
- full-media flow |
|
The rotary union pictured was designed to pass pneumatics and/or DI water for a Chemical Mechanical Planarization (CMP) piece of Semi-conductor equipment. The union is manufactured from 316 stainless steel and the shaft is hard chromed on the industrial seal surface for hardness. We currently provide a number of multiple passage rotary couplers to the Semi-conductor industry in the CMP field.
Please contact our Technical Sales Staff for your specific requirement.
|
|
316 stainless steel symetrical and express quick couplers to weld, threaded or with professional hose shank.
316 stainless steel threaded cam lock couplings or hose shanked cam lock couplings type A, B, C, D, E, F, dust professional caps and dust plugs. |
|
SMC Series Subminiature Couplings
The SMC Subminiature Coupling is Colder Products’ smallest coupling. This twist-to-connect coupling provides a reliable and more secure alterative to luer-type connections. The SMC also allows the tubing to rotate freely when connected, which prevents both kinked tubing and accidental disconnection during use.
|
|
| Rotary Systems' entry level 90 degree swivel is designed for the professional hose reel industry. This economical swivel uses a hardened and ground shaft and impregnated Teflon professional seals. The 001 series is able to withstand high pressures, moderate speeds and low side loads. |
|
Any semi-rigid gas pump professional hose can be made flexible and easy-to-handle with DynaVariacor® - the patented multi-directional interconnector.
It reduces efforts, increases suppliers of nozzle manoeuvrability.
Prevents unwanted twisting of the hose.
Easy filling whatever the position of the gas tank cover or type of vehicle.
Easy nozzle removal from the vehicle.
This connector Improves uniform wear of the hose thanks to less twisting.
Best flow whatever position the connector is in.
|
|
Cutting Ring Professional fittings acc EN ISO 84 34-1
- made of stainless steel AISI 316ti
- LL, L and S series
- from 4 to 42 mm
- nominal pressure up to 630 bar
- with double sided pipe connection
- with Viton professional seal or metal sealing
- ans other variations according to customer requirements |
|
| Rotary Systems' inline dual flow unions are designed for both high and low pressure applications. The unions utilize a hardened and precision ground shaft, impregnated Teflon professional seals with o-rings and dual radial ball bearings to prevent side loading to the seals. |
|
ZLC Series Die-Cast Nickel-Plated Zinc Quick Disconnect Couplings
Colder Products’ new die-cast nickel-plated zinc quick disconnect couplings (ZLC) are a reliable, economical solution that is particularly suitable for high volume production requirements when the durability of metal is required. Streamlined and lightweight in relation to comparable machined brass couplings, the ZLC is interchangeable with many of Colder’s existing coupling lines.
The ZLC incorporates an easy-to-use thumb latch, automatic shutoff cocks, integral terminations, and an audible “click” indicating a secure connection.
The nickel-plated zinc ZLC provides effective chemical resistance to gasoline, ink, air, water, and many other fluids. It weighs approximately 20 percent less than comparable chrome-plated brass couplings and operates at temperatures ranging form -10° F to 150° F (-23° C to 66° C). Temperature capabilities and chemical resistance may be extended with valve and industrial seal options. Prior to plating, the ZLC is impregnated to eliminate porosity. The ZLC is offered in panel mount or in-line configurations and terminations, including professional hose barb and pipe thread.
|
|
| Designed to handle operating pressures in the range of 6,000 - 15,000psi (414-1034 bar), MPI Tube professional fittings have been engineered to provide secure leak free connections at medium pressures. Utilising a compression style make-up, MPI negates for expensive coning and threading techniques common to higher pressure fittings. |
|
Quick connect non-drip couplings designed solely for connecting low-pressure fluid and vacuum lines in which virtually zero spillage is critical.
CEJN non-drip couplings are adaptable to most applications and system requirements. The series includes two styles:
· Valved—One-hand operated; most commonly used style in fluid systems
· Valveless—Two hands needed for connection/disconnection; useful in coolant applications in which fluid loss at disconnection is not critical
Standard range includes three configurations: single shutoff, double shutoff, and straight through. The series is compatible with working pressures up to 290 PSI (20 bar) and temperatures up to 600° F (315° C) and is available in ¼-inch through 1-inch sizes. Constructions include nickel-plated brass with nitrile professional seals and AISI 316 stainless steel with Industrial viton seals.
CEJN non-drip couplings are offered in four safety levels, enabling users to select the exact level of safety required. All levels are available with an optional safety-locking device that eliminates the risk of unintentional disconnection.
|
|
| Global Manufacturer of Quick Release - Quick Disconnect - Quick Connect Professional hose Couplings in General Purpose Poppet and Dry Break - Non Spill (Flat/Flush Face) styles for virtually any Hydraulic or Pneumatic fluid application. Many styles available from ISO Interchange designs to subsea, panel mount, screw to connect, connect under pressure, and many specialty designs are available from Snap-tite. |
|
| Global Manufacturer of Quick Release - Quick Disconnect Professional hose Couplings in General Purpose Poppet and Dry Break - Non Spill (Flat/Flush Face) styles for virtually any Hydraulic or fluid application. Many styles available from ISO Interchange designs to subsea, panel mount, screw to connect, connect under pressure, and many specialty designs are available from Snap-tite. |
|
| Value Plastics offers 6 distinctive barb styles designed to accommodate the widest possible range of tubing properties and application conditions. Review the descriptions for each of the styles to determine what's best for your application. |
|
Rotationg union for cooling and reheating industrial rollers . Designed with springs for not blocking the flow and avoiding any obturation and wetting of the manufacturer of mechanical seal. In duoflow, the feeding pipe or the water separating ring are self-aligning.
Fluid being conveyed : all fluids (to be specified when placing the order)
Max pressure : 285 PSI
Speed : Until 3500 RPM (according to dimension)
Number of flows : 1 or 2
Installation : Radial inlet (at 90°)
Dimension : 3/8" to 3"
Type of industrial seal : Treated steel graphite seal (other on request)
Materials : Stainless steel rotor, bronze housing
Temperature : Standard 80°C (other on request)
Rotation : Sealed ball bearings manufacturers |
|
Different types :
washer holder
semi-quick
coupling and rotating
Can fit pipe sizes of Ø int. minimum 4 mm maximum 50 mm
|
|
Swiveling flange or rotating union for slow rotation. Designed with DIN flange for large diameters ans high traction strenght.
Fluid being conveyed : all fluids (to be specified when placing the order)
Max pressure : 145 PSI or 232 PSI
Speed : Swiveling or very slow rotation speed
Number of flows : 1
Installation : Axial inlet
Dimension : From 1"1/4 to 12"
Type of industrial seal : Protection ring and Q-ring seal
Materials : Nickel plated steel or stainless steel 316L
Temperature : Standard 80°C /176F (other on request)
Rotation : Angular contact ball bearings manufacturer |
|
Morris pipe couplings
- The original compression coupling
- Easy to install
- Substantial and reliable construction
- Competitive pricing
- Electrical conductivity guaranteed
- Available for practically every pipe diameter |
|
Cepex offers two ranges of PP compression professional fittings: Performance Series and Standard Series. Both are made according to standards EN 712 / 713 / 715 / and ISO 3501 / 3503 / 3458 /3459, and are suitable for installation on PE pipes conforming to ISO 11922; DIN 8072 / 8074; and UNE 53131. These fittings allow for a quick, simple insertion of the tube, considerably reducing installation time: simply loosen the nut (without removing it), and insert the pipe.
|
|
Rotating union for high pressure and high speed.
Fluid being conveyed : all fluids (to be specified when placing the order)
Max pressure : Until 3560 PSI
Speed : Until 2500 RPM (according to dimension)
Number of flows : 1
Installation : Axial inlet or radial inlet (90°)
Dimension : 1/4" to 1"
Type of industrial seal : Composite seal
Materials : Nickel plated steel or stainless steel 316L
Temperature : Standard 80°C (other on request)
Rotation : Single ball bearing suppliers |
|
Duff-Norton manufactures rotary couplers, rotary joints, rotating joints and offers a line of 32 series ranging up to 10,000 psi and up to 5000 RPM. Rotary Union® is Duff-Norton%u2019s registered trademark for rotating joints.
Rotating joints are used to transfer fluids from a stationary supply to a rotating component, i.e., a drum or roll.
They are used in process industries like paper, professional printing, rubber and plastics, textile and chemical; on cranes, on device tools and in a host of other applications. They are used to provide heating or cooling media like steam, hot oil, water or coolant to control the surface temperature of a drum or roll, to transfer air or hydraulic fluid to moving components or to add fluids to industrial mixers while in motion.
Duff-Norton has traditionally served the markets where it supplies its general purpose joints, such as the rubber and plastics industries, and in the textile market it supplies its 8000T, a joint designed especially for the textile industry. The single largest user industry of rotating joints worldwide is the pulp and paper industry, which requires large quantities of joints for steam, water and hot oil. The steam applications (i.e., professional dryer cans) are most prevalent in paper mills. |
|
Radial inlet swiveling rotating union for a flexible rotation and a balanced pressure.
Fluid being conveyed : all fluids (to be specified when placing the order)
Max pressure : Until 4275 PSI (according to dimension)
Speed : Swiveling or very slow rotation speed
Number of flows : 1
Installation : Radial inlet (at 90°)
Dimension : 1/4" to 1"1/2
Type of industrial seal : Composite seal
Materials : Nickel plated steel or stainless steel 316L
Temperature : Standard 80°C (other on request)
Rotation : Oilite bearings specifications |
|
Gamme JR : Pour plateaux indexeurs, joints tournants multivoies, mixte multircuits électrique en option : jusqu'a 12 voies pour air comprimé ou vide et 24 circuits electriques.
Gamme JC : Principe exclusif sans pièces de frottement (1 ou 2 voies). Applications jusqu'a 20 000 t/min et 100 bars. Fonctionne à sec. |
|
PIPE JOINTS, SWIVEL COUPLERS & RAPID COUPLING JOINTS
Metal swivel joints to suit any need for your spraying systems, and modern quick coupling joints made out of high technology plastic materials. |
|
VARIOUS OF SANITARY/HYGIENIC PRODUCTS,
FULL MACHINED, HIGH POLISHED,
APPLYING ON FOOD, PHARMACEUTICAL, IC VACUUM INDUSTRY.
# STANDARD UNION, FERRULE CLAMP SUPPLIERS & PROFESSIONAL FITTINGS
BODY: SS304, SS316, SS316L
ENDS: 3A, BS, AS, NZS, SMS, DIN, RJT, CIP, IDF.., ETC.
SURFACE: 180, 220, 420 AND MIRROR OR ELECTRIC POLISHED FINISHED
|
|
Features
8 different, continuously improved sealing systems
Large number of product varieties available
Customer specific designs, even for high-demanding uses
Combinations of various mediums and electrical currents
The most modern materials and manufacturing processes guarantee the highest quality
Products
In almost all branches of industry rotary couplings are needed for transmitting mediums between stationary and rotating machinery parts, whereby every application has different requirements. We have developed an extensive selection of various sealing systems, in order to meet these different requirements, and to be able to offer an optimal solution. We have a large range of products available, and as well customer specific designs.
|
|
|
