|
|
Balustrade cable tray
Glass reinforced Polyester (GRP / FRP). Pultrusion. 0% halogen.
designed for structures with guard rail or stair type access
adapted for emergency escape routes and exits thanks to the option of routing cables inside
delivered in 3 to 6 m lengths
|
|
Pultrusion technology. The assembly principle enables a variety of fittings to be made.
UL is particularly strong and suitable for heavy loads.
- 9 widths, 4 heights
- distance of up to 6 m between supports
- complete system of fittings
- perforated
- bars for fixing cables
- can be provided in kit form
|
|
Cable trunking - Cable Tray system "KP" Series in composite.
Can be used either as a "trunking" or as a "cable tray" with extended support distances (up to 4 meters between supports).
Available in standard 3 m or 6 m in length but also in custom lengths on request.
With or without perforation for cables fixing and ventilating.
Available in a wide range of sizes to meet all needs.
Whole range of accessories including fittings (bends, tees...), splice plates, covers, separations, support brackets and hangers available ex-stock.
|
|
The PFLITSCH PIK-Trunking allows all the benefits of industrial trunking to be applied for small cable volumes as well. It can be opened along its entire length, is closed at bends and outlets and is easily installed using a clip process. A number of specially-shaped elements permit effective 3D configuration.
The PIK-Trunking is available in steel sheet, zinc-plated or primed as well as in stainless steel. It can be combined easily with the industrial trunking to product perfect protection for your electronics and sensors.
The advantages:
- Sturdy design
- Closed also in 90° angle
- Can be opened along entire length
- Shaped parts for angles and outlets
- Practical fastening system
- Tools and shearing machines
- 4-trunking cross sections
- Clip technology
- Edge protection, end cap
- installation in narrow areas
|
|
Pre-mounted cable trunks with cable glands
We plan, manufacture and implement modern solutions to the cable protection in industrial channels and PIK trunks.
You define the necessary cable- / Hose glands - we supply
everything ready to be installed!
|
|
Hot press moulding process enabling a complete range of functions and also a variety of fittings to be produced.
K² is suitable for routing cables over stretches with a complex configuration.
- 9 widths, 3 heights: 19 sizes in stock
- Unrivalled speed of installation by interlocking
- Complete system of fittings
|
|
The Industrial Trunking
Economical and reliable for machine and plant engineering
The PFLITSCH Industrial Trunking is the perfect all-round mechanical protection for cables and wires laid from machinery and equipment to switch cabinet and other peripheral units. With over 100 specially shaped elements such as angles, outlets, crossings, reversers etc. each cable routing can be realised. The enclosed system constitutes excellent industrial design.
The trunking components are supplied in various materials, of coated steel sheet or stainless steel, on request painted to customer requirement.
Tools and machines make trunking processing easier.
|
|
|
|
|
|
IDEALFLEX Cable Carriers
It is a closed cable carrier made of galvanized sheet, which consists of a carrying section and a steel guiding strip which is connected to one of the four sides of this section. This enables only a one-way bend to the side of the steel strip. Bends in the other directions are disabled. It is proven by load tests that nor after 10 million cycles are the cables damaged nor is the flexible carrier worn.
IDEALFLEX meets the technical and safety regulations and complies with the DIN 57113/VDE 0113 standards.
The cable carrier is also resistant to all cooling liquids and lubricants commonly used with machine tools.
Attachment
On both ends of the section, there are stubbed or riveted on flanges which can be attached by several ways. (See the table.)
Cables and hoses which are laid loose in the section must be fixed to both ends of the carrier. To ensure the maximum service life of IDEALFLEX, it is necessary to provide its support or guiding in a channel if the section is long. The length of the channel should be equal to at least a half of the length of elevation. The most suitable attachment of the end of a cable carrier is in the middle of the elevation distance. In this way the shortest length of the carrier and the lowest price can be achieved.
-RM quality (for a low rate of movement) to 20 m/min IDEALFLEX with a steel guiding strip.
- RS quality (for a medium rate of movement)
20 to 50 m/min
IDEALFLEX with a steel guiding strip glued with a special adhesive.
- RV quality (for a high rate of movement) over 50 m/min IDEALFLEX with a synthetic guiding strip glued with a special adhesive
|
|
Intelligent solutions for tomorrow’s energy and data infrastructure
Whether in the office, in industry or at home: data networks and infrastructures are becoming ever more important. OBO’s modern cable routing systems mean that you are well prepared for the new requirements of your customers. The systems are not only user-friendly and efficient during installation, but also during the planning phase. Whichever installation you wish to create, OBO’s cable routing systems give you an advantage – in particular, when combined with the fully compatible EGS device systems. And your customers can look forward to attractive, flexible, safe and well-functioning solutions.
|
|
Canaline to smooth walls in autoestinguente PVC series CA
Systems of canaline for wirings at sight
Execution in autoestinguente PVC color white man and gray RAL 7035.
Resistant to acids, oils and fat people, they are indeformabili for temperatures comprised between -20°C/80°c. Perfect system of coupling between cover and canalina thanks to the detail design of the profile. Line of invitation to the breach predisposed to the base of the wall for being able to cut the edge when two canaline in derivation are placed. They come supplied complete of cover in the length standard of 2 linear meters manifactured in sturdy scato them of cardboard.
|
|
Already at the end of the seventies NIEDAX decided to take the COLOR-trunkings, made of steel, into the range.
Two lines with three different measurements each came onto the market in 1980 then.
Steady expansions and the fact that ideas and suggestions from installers and planners were taken into account, have allowed this product group to expand to such vast range. Today the standard program covers, 25 different measurements made of steel, 5 profiles made of aluminium and corresponding fittings, balustrade-covering and other accessories.
Based on the long experience of our construction division countless special variations were furthermore carried out in the course of time.
|
|
Slotted Wall Duct
Standard slotted wall Pro-Duct features break-away fingers which provide additional access for wire leads. Each section of the duct is provided with two score lines. The upper score line is used to break away fingers when a greater opening is required. The lower score line allows the sidewall to be smoothly cut for joints and "T's". Certain sizes of slotted wall wiring duct are available in intrinsic blue color. This indicates that the control panel is intrinsically safe - often required in applications where explosive gases exist. Contact HellermannTyton for details and specific sizes of intrinsic blue, slotted wall wiring duct.
|
|
This is by far the largest product range, with a high number of articles.
Including: Cable trays/-ladders, wide span cable trays/-ladders, vertical ladders and mesh cable trays - everything in different load/span classes , siderail heights and width as well as material and corrosion protection.
Of course there are also fittings, covers, barrier strips and connectors corresponding to the siderail height and width as well as cantilever brackets and hanging pendants with load-capacities of 100 N to 10,000 N.
Talking about a system, the material and surface integrity are dovetailed with each other too.
|
|
Cable tray systems
* Cable trays of every size and design
* Optimum cable routing in all areas of electrical installation
* Complete product ranges with all logical system components for any task
* Both for horizontal and vertical cable routing
* Special surfaces for guaranteed corrosion protection – even in external areas
Cable trays
Wide span cable trays
Fittings
Straight connectors
Angle connectors
Adjustable connectors
Joint plates
Covers
Cable holders
Distribution boxes
|
|
|
|
|
|
InfoStream® Multi-Channel Raceway
HellermannTyton's InfoStream Multi-Channel Raceway is a revolutionary design for non-metallic raceway system. The elliptical shape is aesthetically pleasing when compared to other designs. By using the three rails to snap in dividers, the InfoStream system can accommodate up to four separate channels of electrical, voice, data, video or fiber optic cabling. InfoStream's unique and patented design make installations quicker and easier. The raceway and fittings are manufactured from a UL 94V-0 rated material.
Features a unique, elliptically shaped profile which is currently offered only by HellermannTyton. The rounded profile offers both a sleek appearance and also helps absorb shock if the raceway is inadvertently struck. InfoStream speeds installation as the raceway's hinged cover can be partially mounted prior to laying cables, while doubling as a ledge, preventing wire and cable from falling out of the raceway during installation.
Compatible with HellermannTyton's single channel TSR line of raceway, InfoStream offers up to 4 separate channels for electrical, voice, data, video or fiber optic cabling. The InfoStream system is U.L. Listed to U.S. and Canadian safety standards. InfoStream is available in 8 and 10 foot lengths in office white and electrical ivory.
|
|
Wire Management Systems
Managing the hundreds of thousands of feet of cable found in a typical construction job site can be a formidable challenge. Thomas & Betts offers hundreds of products to help wiring professionals route and conceal wiring. Leading T&B brands include
T&B® cable tray, T&B Express Tray®, Steel City® floor boxes, Ty-Duct™ wiring duct and accessories, and Omni-Plus® voice/data accessories.
|
|
|
Slotted cable trunking for electric panels and boxes are available in 20 different sizes with reduced and standard pitch. They are provided with perfectly rounded upper profile of reeds so to make cabling operations easier. They can be installed against walls or overhead thanks to the corresponding fixing slots.
|
|
Solid Wall Duct
Solid wall Pro-Duct wiring duct is designed for straight wire runs where breakouts are not required.
|
|
HellermannTyton's selection of wire management products allow users to neatly and efficiently manage wire and cable in many different ways.
Solid Wall Duct
Solid wall Pro-Duct wiring duct is designed for straight wire runs where breakouts are not required.
|
|
SRL1-10-WH6A Raceway,Adh Mnt,White,6 Ft Lg,
SRL1-3-WH6A Raceway,Adh Mnt,White,6 Ft Lg, ,
SRL1-5-WH6A Raceway,Adh Mnt,White,6 Ft Lg, ,
|
|
Managing the hundreds of thousands of feet of cable found in a typical construction job site can be a formidable challenge. Thomas & Betts offers hundreds of products to help wiring professionals route and conceal wiring. Leading T&B brands include
T&B® cable tray, T&B Express Tray®, Steel City® floor boxes, Ty-Duct™ wiring duct and accessories, and Omni-Plus® voice/data accessories.
|
|
SCAME offers a wide range of trunking meeting the different requirements of electric distribution systems mounted on site, in commercial building, industrial and service applications. They are made in full compliance with current safety standards; and can be installed easily and quickly, ensuring low installation costs.
Thanks to their modern design , they are suited to both domestic and working environments.
The range offers:
* separation of different circuits (electric system, phone system, central TV system, EPD data trasmission, PC)
* installation of wiring accessories into the relevant back boxes
* complete accessibility of the finished system for inspection purposes.
* easy adaption of existing installation to accomodate additional accessories, switches, sockets, etc.
* integrating mini-trunking with skirting trunking
|
|
|
|
|
|
Exel Composites Cable Support Systems offer engineers a structural product for solving many design and plant engineering problems, enabling long term reliable support of expensive and often critical cables. Products possess unique properties which enable them to resist many corrosive environments, particularly where conditions indicate that conventional materials will not provide an economic service life.
Constructed from glass reinforced thermoset resins, Cable Support Systems are designed and manufactured with a structural integrity normally only associated with steel and aluminium, but without their corrosion, weight and electrical conductivity problems. Procuts resist acids, salts, alkalis and a wide range of aggressive chemicals and environments which have drastic effects on galvanised steel and aluminium. They have a superior strength to weight ratio compared to steel or aluminium whilst maintaining a similar structural integrity. Pultruded fibreglass profiles have a specific gravity of one-fourth that of steel and two thirds that of aluminium, allowing for considerable simplified erection and handling. Composite cable ladder and tray is non conductive and non magnetic, meaning a safer support system. Fibreglass composites are transparent to radio frequency transmissions.
A wide variety of industries take advantage of the benefits of composite Cable Support Systems. e.g. Chemical Processing, Petrochemical, Mineral Processing, Ports and Harbours, and Aluminium and Bauxite Processing.
Exel quality and environment policy complies with the requirements of the standards ISO 9001:2000 and ISO 14001 (Bureau Veritas Certification).
|
|
|
The FIBERRUNNER® and FIBER-DUCT Routing Systems are systems of channel, fittings and brackets designed to segregate, route and protect fiber optic and high performance copper cabling. They are suited for data center applications where cable is routed from distribution areas to equipment cabinets or racks. They are used in Telco Central Offices to route fiber optic jumper cables between fiber distribution frames and equipment bays. They can be deployed over the racks or in approved under floor applications. Available standard colors include yellow, orange and black.
|
|
Mesh cable tray systems
Magic mesh cable trays
Mesh cable trays
C mesh cable trays
Fittings
Straight connectors
Angle connectors
Adjustable connectors
Joint platesCovers
Mesh angles
Cable holders
|
|
CC9-1 Standard 23" [584 mm] long when fully extended
CC9-2 Manufactured to order, 29" [736 mm] long when fully extended
Use with round cable
Quick disconnect chassis fasteners
|
|
Various holding systems for fitting cable protection conduits. Individual holders or a stackable system are available.
Type HS (conduit holder)
Conduit holder system made from polyamide, arrangable in rows and stacks. The holder can be screwed on directly. Optional accessories enable the bracket to be adapted to a wide variety of installation situations.
Flexible system
Stackable
Arrangable in rows
Compatible with single holder types UH, UHF and USH
Type HS (accessories)
HS/F >pfeil
de fixation (comme UHF).
HS/U holder is simply snapped onto the footHS/C >pfeil
ning foot (as KAF). Foot can be snapped onto top hat and C-rails.
HS/U holder is simply snapped onto the foot
Flexible system
Stackable
Arrangable in rows
Compatible with single holder types UH, UHF and USH
|
|
When your installation calls for laying a large number of cables, we recommend the use of cable ladder.
This solution offers the advantage of improving ventilation, thus avoiding overheating and damage to the confined cables, enabling higher electrical currents to pass through the runs.
We have designed two types of cable ladders, adapted to two types of installations.
The EAC-CES cable ladders satisfy most everyday needs. They have the advantage of being collapsable and so easier to store. The ELP-CES extended length ladder is ideal for arrangements with a heavy load or over an extended distance.
With their quick locking splice bars, assembly and installation of these two models are very easy. Both types of cable ladder have the same accessory systems: splice bars, bends, T and cruciform junctions, reducers, covers, etc.
|
|
SR series of medium duty cable ladder : height 55,75,100 mm, Width from 200 to 600 mm
HERCULE series of heavy duty cable ladder : height 75, 100, 150 mm , Width from 200 to 1000 mm.
ATLAS series of extra heavy duty cable ladder : height 75, 100, 150 mm , Width from 150 to 900 mm.
|
|
We can offer you different cable tray profiles, including the P.S profile, and the P.S.n. profile (new product).
The P.S. profile is a safety product, with its shape designed to reduce the risks of injury during installation.
Moreover, the P.S. edges improve the rigidity of the structure. This asset enables lighter tray to be used, allowing for greater distances between supports. In turn, this leads to a reduction in the number of parts required and hence, to a reduction in assembly cost.
Several other types of cable tray profile are available: Straight, Omega, C profile edge, etc.
All our tray models are compatible with an extensive range of accessories: cranked, interlocking splice bars, both flat and for crimping; tray base joints; 90° and 135° angled bends; convex, concave, cruciform, T joints etc.
|
|
|
|
