|
|
|
|
|
|
The MYCO2 is a high performance infra-red gas sensor, designed for monitoring environmental CO2 in protected crops and demand controlled ventilation.
MYCO2 is a robust, low cost CO2 monitor, housed in an IP65 rated enclosure against the ingress of water and particulates. The monitor operates on a diffusion/convection principle and therefore no sampling pump is required.
This monitor can easily be wall-mounted.
For many years, Edinburgh Sensors has manufactured infra-red, dual wavelength sensors with a single optical path and without any moving parts. As a result, the sensor is highly gas specific, and insensitive to other gases and water vapour.
This ensures long term stability and accuracy over extended periods, removing the need for frequent re-calibration.
The MYCO2 sensor can be customised to suit specific applications, placing the design control in the hands of the system designer. The user selectable functions include linear analogue output options, alarm function software and automatic temperature correction.
The MYCO2 sensors are aspirated by a combination of diffusion and convection within the sensor head. This gas sampling method is silent, reliable and provides a fast response time. Convection is used to circulate gas between the sensor head and the diffusion cell with gas exchange occurring, by diffusion, at the surface of the diffusion membrane. Since the gas in the cell circulates within a closed system, all optics are protected from the ingress of dust. No additional pumping or filtering of the gas is necessary.
|
|
From fermentation through to distribution, Carbon Dioxide is one of the most common hazards to health in breweries, cellars and drinks outlets.
It is also the fourth most abundant gas in atmosphere; Long term exposure to only 0.5% volume represents a toxic health hazard.
Concentration greater than 15% volume can lead to death.
CellarSafe has been specifically designed
to warn personnel of these hazards and features both long life sensors and remote warning panels (whcih can for example be installed behind a bar as well as at the entrance to the cellar).
|
|
Novel infrared measuring system for CO2
With an infrared sensor (IR sensor) specifically for carbon dioxide.
The infrared measuring system detects the carbon dioxide content of the ambient air fast and precisely. It contains a novel infrared measuring system functioning basically like a conventional two-beam photometer.
However, since material and construction of the sample cell are novel, and the measured signals are evaluated and processed according to a new digital algorithm, the infrared measuring system is light-weight, compact, in normal applications maintenance-free and long-term stable but nevertheless affordable.
The infrared measuring system detects the absolute carbon dioxide content of the ambient air (partial pressure), monitors itself constantly and signals malfunctions of its hard and software. The whole measuring range is linear.
|
|
The GMT220 transmitter series is designed for a wide range of industrial carbon dioxide applications including greenhouses, fruit storages, safety alerts and demand-controlled ventilation in mushroom farms, livestock husbandry and parking garages.
The GMT220 transmitters measure carbon dioxide in harsh and humid environments. The housing is dust and waterproof to IP65/NEMA4. The materials have been chosen for extended corrosion resistance.
The GMT220 transmitters are easy to use and install. The transmitters have a modular structure which includes a separate mounting plate for easy installation.
Interchangeable probes facilitate field maintenance. The probes can simply be replaced with newly calibrated ones, or with separate probes that are only used as a reference for calibration checking. This minimizes downtime and eliminates the need for expensive calibration equipment.
|
|
Besides pH and dissolved oxygen measurements, reliable monitoring and control of the CO2 partial pressure is important for successful fermentation. The oxidation of carbohydrates to CO2 water results from aerobic respiration. METTLER TOLEDO's new CO2 measuring system is specially designed for in-situ measurement into a bioreactor and therefore "registrates" exactly the same partial pressure as the cell.
METTLER TOLEDO offers a wide range of different measurement systems for very specific requirements in different industries consisting of sensors, housings, transmitters, services and fulfills all high quality requirements.
|
|
Thermo Scientific's Model FX-CO2 single gas detector/transmitter uses an NDIR (non-dispersive infrared) sensor to detect carbon dioxide (CO2) in the workplace. The sensor and electronics are mounted in a NEMA 4X fiberglass surface mounting enclosure.
Features:
- Uses an NDIR (non-dispersive infrared) technology
- Industry standard, 4 to 20 mA output
- Housed in rugged, weather proof case, suitable for indoor or outdoor installation
- Excellent long term stability
- User friendly - simple to operate
- Economical
- Splash resistant NEMA 4X
- Diffusion and flow-through version available
|
|
| ... products without technical information |
| |
O2 and CO2 are the gases whose rates of consumption or production are most frequently measured for the purposes of study and process control (energetic metabolism, substract utilisation, etc.).
The measuring ranges of the GA analyser (0÷10 or 15% for CO2, and 21÷10% for O2) have been chosen specifically for your application.
The system is based on wellproven, high quality transducers, and is characterised by an extremely reduced internal volume, to reduce overall response times.
|
|
| ... products without technical information |
| |
|
The original "clean" agent, carbon dioxide suppresses fire without leaving behind an agent to damage sensitive equipment. And because there is no agent to clean up, you're back in business faster. To provide the most economical system arrangement without sacrificing performance, we offer both High and Low pressure systems including the exclusive ANSUL® "Mini-Bulk" tank technology.
|
|
|
|
|
|
Hygood Carbon Dioxide Fire Suppression System
A fire in your facility is never pleasant. But, it doesn’t have to be debilitating. Carbon dioxide, the original 'clean agent,' is still an economical solution, providing automatic or manual protection for Class A, B or C fires.
The only gaseous agent capable of deep seated Class A hazard protection, versatile Co2 can flood enclosed areas or discharge directly onto burning surfaces.
Hygood High Pressure Carbon Dioxide Systems are especially effective for non-occupied hazards such as semiconductor wet benches, control rooms and paint lines. Whatever the application, from cylinder to nozzle, each system is custom-designed for your specific fire hazards.
Hygood Co2 systems have been proven effective in numerous non-occupied applications:
• Commercial and industrial fryers
• Dip tanks
• Electric generators
• Electrical panels
• Marine applications
• Spray booths
• Waste disposal equipment
• Gas turbines
• Coal silos
• Hazardous material storage
• Quench tanks
• Semiconductor wet benches
• Computer room subfloors
• Non-occupied control rooms
• Paint lines
• Wave solder machines
• Machining operations
• Hose reel stations
• Transformer vaults
• Dust collectors
• Printing presses
• Inerting systems
|
|
REVEN*-0-MAT
The fire-extinguishing system REVEN®-0-Mat was developed -► for the automatic fire protection of deep fryers, fryers and grills in kitchens.
In addition, REVEN®-0-Mat protects the extraction hoods and exhaust air ducts. The system consists essentially of an extinguishing agent container and an automatic trigger ANSUL AUTOMAN including the pertinent pressure reducer. The components are fitted in a single enclosure. Nozzles, detectors, solders and guide rolls are delivered as a complete unit.
|
|
CS2-A - CARBON DIOXIDE FIRE EXTINGUISHER
CS2-A is a carbon dioxide (CO2) fire extinguisher with lever valve. Certified according to the Pressure Equipment Directive PED 97/23/EC, Marine Equipment Directive MED 96/98/EC and CEN EN3. Capacity is 2 kg.
CS2-ML - CARBON DIOXIDE FIRE EXTINGUISHER
CS2-ML is a carbon dioxide (CO2) fire extinguisher with lever valve and front horn. Extended operating temperature range ?30 °C + 60 °C, therefore suitable for use in lowtemperature countries. Certified to the Pressure Equipment Directive PED 97/23/EC, Marine Equipment Directive MED 96/98/EC and CEN EN3. Capacity is 2 kg.
|
|
CS5-A - CARBON DIOXIDE FIRE EXTINGUISHER
CS5-A is a carbon dioxide (CO2) fire extinguisher with lever valve. Certified according to the Pressure Equipment Directive PED 97/23/EC, Marine Equipment Directive MED 96/98/EC and CEN EN3. Capacity is 5 kg.
CS5-ML - CARBON DIOXIDE FIRE EXTINGUISHER
CS5-ML is a carbon dioxide (CO2) fire extinguisher with lever valve. Extended operating temperature range - 30 °C + 60 °C, therefore suitable for use in lowtemperature countries. Certified to the Pressure Equipment Directive PED 97/23/EC, Marine Equipment Directive MED 96/98/EC and CEN EN3. Capacity is 5 kg.
|
|
Carbon Dioxide extinguishers are suitable for class B risks involving flammable liquids and are best choice for general electrical hazards. CO2 is harmless to electrical equipment and is ideal for modern offices, electronic risks and fires causes by the combustion of liquids such as oils, fats, solvents, etc.
The 2kg size has a 55B fire rating and incorporates a “safe to hold” horn which not only gives a benefit from increased performance but also prevents frost burn to the user. The carbon dioxide used is a recovered industrial by-product, thereby reducing the carbon levels contributing to the greenhouse effect.
|
|
|
|
see the results for the following category : 
