|
|
GfG's fixed gas detection systems are available as easy to operate single point units or as larger systems with several hundred transmitters. These multiple point systems consist of controllers and transmitters that communicate with each other. The transmitter changes the measured gas concentration to an electrical signal which is transfered to the controller. The controller shows the gas concentration in a display and immediately activates alarming devices in case of a gas leak. Advanced features such as data logging or online data transmission allow the user to easily monitor ambient changes in the environment. The Stand Alone unit is a combination of both transmitter and controller.
The transmitter's sensor is the "sense of smell" of a fixed gas detection system. The sensor is located in a metal sensor enclosure which is attached to the transmitter and converts the gas concentration into an electric signal. Electronics inside the transmitter changes this electrical signal for interference free transfer to the controller. The transmitter and the controller can be installed several 100 meters apart from each other.
|
|
|
Dräger's product range covers a wide variety of types: electrochemical, catalytical or infra-red IR sensor technology point or open path detection intrinsically safe or explosion proof analog 4 to 20 mA, digital HART or RS 485 signal output with or without local display with or without on-board relays low budget or high end equipment Your local representative will gladly help you determine the right product for your application.
|
|
Gas detectors E2606 are intended for air quality monitoring - control of toxic gas and oxygen concentration and prevention of gas leaks in confined spaces.
Depending on version the gas detector E2606 uses either advanced metal-oxide semiconductor or an electrochemical gas sensor. Concentration of toxic (carbon monoxide, VOC, freons, ammonia,H2S etc) gases or oxygen deficiency can be measured.
- Measuring range 0..5 %vol.
- Temperature range -20..+50 °C
- Output relay 230 VAC, 8A
- Supply 230 VAC or 24 VDC
- Diffusion, flow-through and remote sensor versions
- Visual and audible alarms, adjustable output relay
- Linearized analog output 4-20 mA
- RS485 Modbus RTU interface option for direct Fieldbus networking
- Wall-mount
|
|
The Tocsin 103 series of gas detectors are designed for cost effective safe area gas detection solutions. They incorporate micro processor technology to give a stable 4-20mA process signal output or digital addressable output. The addressable output option allows detectors to be networked on a single cable run giving dramatic reduction in installation costs. The in built processor can be used to pre-calibrate the sensor prior to installation. Alternatively calibration can be achieved on site via the Oliver IGD control panel or locally using a handheld PC device or laptop. A range of sensing technologies can be incorporated into the housing to provide the most appropriate detection method.
ATEX VERSIONS (TOCSIN 102) AVAILABLE
Available sensor types include
IGD’s own MKIII and Type B Pellistors,
Infra Red
Electrochemical Devices
Gas Detected Include
Flammable Gases
Carbon Dioxide
Carbon Monoxide
Nitric Oxide
Nitrogen Dioxide
Hydrogen Cyanide
Chlorine
Hydrogen Sulphide
Ammonia
Oxygen
Sulphur Dioxide
Hydrogen Chloride
ATEX VERSIONS ALSO AVAILABLE
|
|
The FX-SMT Intelligent Single Gas Detection Transmitter is loaded with industry features. These transmitters come standard with non-intrusive calibration which eliminates the need to declassify hazardous areas, a user adjustable "calibration reminder" message. Smart sensor replacement assemblies available for plug in operation.
This single gas transmitter can be configured for the detection of combustibles, AsH3, B2H6, Cl2, Cl02, CO, F2, HCl, HCN, HF, H2S, NH3, NO, NO2, O2, O3, PH3, SiH4 or SO2.
|
|
The Model 128 is a wall mounted gas monitor designed for reliable gas detection, easy installation and low total cost of ownership. The Model 128 is a cost-effective solution for warning of unsafe gas levels in areas such as semiconductor manufacturing, wastewater treatment, garages, warehouses, toll booths, gas bunkers, utilities, and telecommunications industries.
The Model 128 accepts from one to eight combustible, oxygen and/or toxic sensors. Each sensor provides a digitized output, allowing easy and economical networking of multiple sensors.
|
|
The RAID-S2 is a gas trace detector for the detection of chemical warfare agents (CWA’s) and toxic industrial chemicals (TIC’s). It is based on proven Ion Mobility Spectrometry technology. The RAID-S2 is specifically designed for long-term operations in a 24/7 environment
with preventive maintenance required only once a year. It is ruggedized for military and civil defence environments.
|
|
The Bacharach HGMSZ (Halogen Gas Monitor Single Zone) is designed for continuous single-point monitoring of CFC, HFC, HCFC and Halon refrigerant gases. The HGMSZ displays the type of gas being monitored, along with displaying both the current gas level and the peak gas level detected on its front panel LCD. The instrument retains a log of previous readings that can be easily accessed for analysis.
An internal audible alarm and front panel indicators are provided to signal alarm and fault conditions, and relay contacts can be used to trigger external alarm devices in the event of a system fault, or if a leak (small), spill (medium), or evacuation (large) level of gas is detected. The system also includes a 4%u201320 mA current loop interface that can be connected to remote monitoring equipment.
|
|
|
The Model MC600 is a highly configurable multi-channel controller that provides six channels of continuous gas detection. It is compatible with our fixed hydrocarbon sensors, H2S sensors, as well as our Models S4000CH, S4100C, S4000T, S4100T, IR2100, IR5000, IR7000, TS4000, TS400 and TS420 gas detectors. Dual redundant Modbus communications provides complete status and control capability. Removable terminal blocks provide ease of installation and wiring. Six user configurable 8A relays drive a combination of horns, beacons etc. Modular, plug-in signal input cards allow for system expandability and simplified maintenance. Pre-configured from factory saves installation time with minimum setup required. User selectable zoning and voting for application flexibility.
|
|
Next generation iTrans™ fixed-point gas monitors employ an intelligent electronics platform to provide 1 or 2 points of detection from a single head for maximum flexibility, superior performance and lower installation costs. The four wire system is capable of accommodating more than 200 transmitters in RS485 bus configuration. Able to monitor any combination of gases for a specific environment, iTrans™ utilizes our industry-proven "smart" sensor technology and safety features including automatic sensor recognition, zero and cal fault protection, access code security, all enclosed within an explosion-proof aluminum housing.
|
|
The RAEGuard is a permanently mounted (fixed) volatile organic compound (VOC) monitor using a Photoionization Detector (PID) transmitter that operates from a 9 to 36 VDC power source and provides an analog (4-20 mA) signal output in three full scale ranges* of 20 ppm, 100 ppm, or 1,000 ppm isobutylene equivalent. Housed in an explosion-proof enclosure, the RAEGuard is equipped with a local digital display of the gas concentration and functional keys for performing calibration.
* Ranges are not selectable, and must be specified at the time of order.
Key Features
- 4-20 mA analog output ranging from 0.1 to 100.0 ppm, or 1 to 1000 ppm isobutylene equivalent
- 4-20 mA analog output ranging from 0.01 to 20.00 ppm isobutylene equivalent for ultra-sensitive version
- Explosion-proof enclosure for hazardous locations
- Long life 10.6 eV Ultraviolet lamp and 3D Sensor
- Built-in pump with patented self-cleaning duty cycle operation
- Local displays with adjustment keys
- Magnetic key interface eliminates need to open explosion-proof housing when making calibration and other minor adjustments
- Operation at 12 to 30 VDC
- Dry contact output (Max 30V, 2A)
Applications
- Waste water treatment plants
- Marine and off-shore oil wells
- Refineries & petrochemical plants
- Power plants
- Pulp and paper mills
- Solvent recovery systems
- Painting and coating operations
- Air Quality
|
|
When used with gas and smoke sensors (refer to page 96), GRM
continuously monitors explosive gases, vapours and/or smoke and
generates alarms. The GRM electronic gas and smoke detector is installed in boiler rooms and basements, storage, office and living rooms as well as
public facilities or industrial buildings for increased safety (building
technology). The evaluation unit is designed for either wall mounting
or control panel mounting by means of a mounting frame (refer
to page 74). GRM has an alarm threshold and is fitted with a relay
contact. When the threshold value is exceeded, the unit generates an
alarm signal. The red "Alarm" LED lights up and the alarm relay
switches. An additional integrated buzzer provides an audible alarm.
This audible alarm can be muted with the re-set button. If the condition
which caused an alarm is cleared, the visual alarm can then also
be re-set by once again pressing the re-set button. Only then can
the alarm be muted with the re-set button. However, if the gas concentration level is still above the alarm threshold level, muting of the alarm is not possible.
|
|
The Model IR400 Infrared Point Detector is a hydrocarbon gas detector that continuously monitors combustible gases and vapors within the lower explosive limit (LEL) and provides alarm indication.
All electronics are contained within an explosion-proof housing so that the IR400's detector information can be processed locally. The IR400 operates with a 4-20mA signal, which is proportional to 0 to 100% LEL gas concentration at the detector. Configurations with analog output, Modbus and HART are available. Modbus and HART data can be used for predictive maintenance.
|
|
With the GD10P, the company has succeeded in establishing an international industry standard for gas detection.
The GD10P has been designed to be interchangeable with catalytic detectors using the existing cabling and a separate bridge interface.
Advantages of GD 10P
• No recalibration during its service life,
• 15 years warranty for IR source,
• 5 years full warranty,
• SimSource™ has an expected in-service life of 65 years,
• Very short response time , T90 < 5 secs,
• No false gas alarms.
The easy installation and operation of the GD10P contribute to its all-round solid economy.
The GD10P does not have any internal functions that require regular monitoring or maintenance.
|
|
|
The Model IR5000 Open-Path Infrared Combustible Gas Monitor is designed for detection of hydrocarbon gases in the 0-5,000 ppm•meter and 0-5 LEL•meter ranges, simultaneously. The IR5000 uses a single beam source and detector to monitor gas concentrations, improving accuracy, reducing drift and improving immunity to false alarms.
|
|
|
In line with its continuous commitment to meeting customer demand for more cost-effective and reliable customtailored gas detection solutions, Vulcain introduces the next generation of stand-alone gas monitors—the Vulcain 301M Dual Gas Monitor. Like its predecessor, the Vulcain 301M is an advanced microprocessor-based system that features a high quality controller, a high-tech enclosure designed to provide maximum effectiveness and durability, and all the characteristics required to ensure continuous, accurate and fully integrated monitoring of hazardous gases and combustibles.
|
|
|
In many industrial applications, safety is ensured around the clock by a fixed gas detection system. Hazards can have several origins: the release of toxic gases, oxygen deficiency or enrichment as well as the presence of combustible gases and vapors. When detected at an early stage, countermeasures can be initiated to protect personnel, workplaces and equipment.
|
|
|
GfG's fixed gas detection systems are available as easy to operate single point units or as larger systems with several hundred transmitters. These multiple point systems consist of controllers and transmitters that communicate with each other. The transmitter changes the measured gas concentration to an electrical signal which is transfered to the controller. The controller shows the gas concentration in a display and immediately activates alarming devices in case of a gas leak. Advanced features such as data logging or online data transmission allow the user to easily monitor ambient changes in the environment. The Stand Alone unit is a combination of both transmitter and controller. GfG controllers are designed to operate any transmitter offering either a 0,2-1 mA or a 4-20 mA signal. The controller processes the electrical signal received from the transmitter. It evaluates and displays the measured gas concentration. All controllers offer three on board relays that will be activated if the gas concentration exceeds the alarm level. All controllers are available as 1 or 4 channel controller. This means that either one or up to 4 transmitters detecting the same gas in the same range can be connected to one controller.
|
|
The Tocsin 700 provides ultimate system flexibility for small gas detection systems up to 32 detectors in size. The Tocsin 700 control panel is compatible with the Tocsin 102, 103,103A, 102A and 903 range of Flammable, Toxic and Oxygen detectors and transmitters.
- Wall mounting
- 24V DC or 110/230vAC operation
- 24V Independent Audio/Visual Alarm driver
- Volt free contact outputs
- Digital display showing gas concentration
- Serially addressable detector options
- Battery backup options
- Optional additional input/output cards
- Easy installation
- Modbus Output Option
|
|
GfG is a world leader for gas detection and measurement technology. For over 40 years GfG has specialized in designing, developing and producing the safest and most reliable equipment and sensors available.
GfG offers an extensive range of portable monitors and fixed systems. The product range includes sensors, the world´s smallest gas monitors, micro-processor controlled multi-gas detectors and computer aided system solutions. GfG provides diverse solutios for Toxic, Explosive and Oxygen gas detection in air and water.
GfG equipement is used in a variety of applications and industries including automotive, chemical industries, landfills, steel industries, hospitals, mining, public utilities, food processing, research institutes, universities and wherever the protection of life and property is needed.
|
|
The Tocsin 700 provides ultimate system flexibility for small gas detection systems up to 16 detectors in size. The Tocsin 700 control panel is compatible with the Tocsin 102 and 103 range of Toxic Flammable and Oxygen detectors and transmitters. The system can control both analogue or digital addressable detectors.
To compliment the system a range of accessories, calibration sets and audio visual alarms are available.
Features
24V DC or 110/230V AC Options
Control up to 16 detectors
Mix Analogue and Digital Addressable Detectors
User configurable alarms
Add extra alarm relay outputs
Add analogue outputs
RS485 I/O
On Board event logging
Download event memory and panel set up to PC
|
|
The Tocsin 102 series of gas detectors are designed for cost effective hazardous area gas detection solutions. They incorporate micro processor technology to give a stable 4-20mA process signal output or digital addressable output. The addressable output option allows detectors to be networked on a single cable run giving dramatic reduction in installation costs. Combine with the Tocsin 903 controller for local display and calibration. The in built processor can be used to pre-calibrate the sensor prior to installation. Alternatively calibration can be achieved on site via the Oliver IGD control panel or locally using a handheld PC device or laptop. A range of sensing technologies can be incorporated into the housing to provide the most appropriate detection method.
Available sensor types include
Infra Red
Electrochemical Devices
Gas Detected Include
Flammable Gases
Carbon Dioxide
Carbon Monoxide
Nitric Oxide
Nitrogen Dioxide
Hydrogen Cyanide
Chlorine
Hydrogen Sulphide
Ammonia
Oxygen
Sulphur Dioxide
Hydrogen Chloride
|
|
|
Dräger‘s IR gas detectors provide state of the art technology. They perform reliable measurements even in harshest environments and come with a lot of configuration options. Continuous self test routines result in fail-safe operation.
|
|
Open Path Gas Detectors measure combustible hydrocarbons along a line of sight, between an optical transmitter and a receiver. The well proven measurement principle is based on IR absorption.
Path lengths up to 200 metres can be monitored with Dräger Safety Open Path Systems. Only this technology is measuring the amount of released gases and thus gives a direct measure of the hazard.
|
|
The FX-IR Single Gas Transmitter uses dual infrared technology to detect combustible gases. This unique transmitter is available for the detection of hexane, methane or propane gases in lower explosive limits (LEL) or parts per million (ppm) ranges. This dual infrared design provides excellent long-term stability, eliminating the need for frequent calibration and providing additional sensitivity for the harshest environment.
|
|
The DS2 Docking Station provides the ultimate flexibility for managing your gas monitors wherever you use them. The DS2 gives you all of the benefits of consistent automated calibration, record keeping, battery recharging and instrument diagnostics for your monitors to limit your liabilities and safety hazards. Two way wireless and/or ethernet connectivity enables you to link up to 100 stand-alone Instrument Docking Stations (IDSs) from remote locations anywhere in your facility and relay the data back to one central database for total instrument management. A graphical user interface tool (DSSAC) allows an administrator to view operations on each Docking Station from a network computer, making it easy to track instruments, print reports, set events and change parameters for any location.
|
|
MSA provides detectors for continuous monitoring of virtually all hazards of combustible atmospheres, toxic gases, oxygen deficieny and fire using detection methods that best suit your application.
|
|
CalCheck is an easy to use reliable tool for the self calibration of gas and leak detection instruments, giving you peace of mind and confidence in the accuracy of the measurements you rely on.
For your convenience the same base unit can be used for calibration with many different gases and leak rates. Ion Science can supply almost any non corrosive gas at varying concentrations and the instruments leak is easily removed allowing the use of a specific leak rate when required ensuring calibration to your exact needs.
|
|
|
GfG's fixed gas detection systems are available as easy to operate single point units or as larger systems with several hundred transmitters. These multiple point systems consist of controllers and transmitters that communicate with each other. The transmitter changes the measured gas concentration to an electrical signal which is transfered to the controller. The controller shows the gas concentration in a display and immediately activates alarming devices in case of a gas leak. Advanced features such as data logging or online data transmission allow the user to easily monitor ambient changes in the environment. The Stand Alone unit is a combination of both transmitter and controller. GfG controllers are designed to operate any transmitter offering either a 0,2-1 mA or a 4-20 mA signal. The controller processes the electrical signal received from the transmitter. It evaluates and displays the measured gas concentration. All controllers offer three on board relays that will be activated if the gas concentration exceeds the alarm level. All controllers are available as 1 or 4 channel controller. | | |
