- Materials - Tools - Components >
- Standard Mechanical Component >
- Flat seal
Flat seals
Temperature limit: -15 °C - 110 °C
Our EPDM Full Face Gaskets are WRAS approved and made to premium quality standards which ensure excellent resistance against factors such as weathering, high temperature and ozone wear. EPDM Gaskets are ...
Temperature limit: 0 °C - 700 °C
Pressure limit: 2,200 psi
Flexicarb NR is a graphite laminate consisting of graphite foil with a nickel core 13 microns (0.0005) thick. The bonding agent is a high temperature, chemical resistant nitrile phenolic adhesive.
Flexitallic
Spiral Wound Gasket Style CG with internal ring for an additional compression limiting stop, with Flexible Graphite filler material. The Style CGI is for use with flat face and raised face flanges, this ...
Flexitallic
Temperature limit: 0 °C - 440 °C
Pressure limit: 0 psi - 2,030 psi
Flexicarb tanged steel reinforced graphite is a laminate sheet material of graphite foil layers mechanically bonded to a 0.1 mm (0.004) thick 316 stainless steel tanged core. The core enhances the mechanical strength of the graphite foil. ...
Flexitallic
... in Germany. novapress® is a group of elastomer-bonded gasket materials based on high-quality aramid fibers and special functional fillers. novapress® products are the standard in flat gasket ...
Frenzelit
Temperature limit: 225 °C
Pressure limit: 25 bar
Diameter: 80 mm - 350 mm
novaSEAL® OV is a gasket material that consists of a temperature, corrosion and chemical-resistant high-performance woven fabric designed specifically for test class C (225 °C and 25 bar pressure). A specially developed ...
Frenzelit
Temperature limit: -40 °C - 400 °C
Metal bead gaskets Material profile Sheets coated with elastomers in the coil process or bright metal sheets are processed into high-quality metal bead gaskets using the progressive die method. For ...
Frenzelit
... Available in standard gasket configurations, custom designs and sheet stock. Nickel / copper plated polyester fabric on both sides of conductive open cell polyurethane foam. Ideal for applications requiring a conformable ...
... environmental seal. The material is manufactured with a matrix of wires embedded in silicone rubber and aligned perpendicular to the contact surfaces. Multishield is available in strips up to 5/8 in. wide, sheets up to ...
Shieldwrap is used for EMI shielding and for dissipating corona discharge at high-voltage splices. It is an all-metal open mesh that is knitted from a single continuous wire into the form of a cylindrical stocking, and then flattened ...
Features The Buralloy heat exchanger seal 2500 is a semi-metal gasket with a soft core and metal jacketing. The Buralloy 2500 thus combines the benefits of a compressible soft seal with ...
KLINGER® CNAF gaskets KLINGER has repeatedly set milestones with the durability of CNAF (compressed non-asbestos fibre) meaning calendared fiber-reinforced sealing materials. KLINGERSIL® provides excellent resistances ...
KLINGER
Temperature limit: -30 °C - 220 °C
Pressure limit: 0.5 bar - 600 bar
Diameter: 10 mm - 2,500 mm
Our range includes: • rotary shaft seals • vee-packing sets in cotton fabric NBR • sealing systems for hydraulic cylinders • flat gaskets in many materials • o-rings • packings and braided ...
... industrial engines and marine engineering. In particular we produce gaskets and sealing systems primarily for industrial diesel / gas engines and propulsion systems. The issues that affect seals in this ...
... industrial engines and marine engineering. In particular we produce gaskets and sealing systems primarily for industrial diesel / gas engines and propulsion systems. The issues that affect seals in this ...
... the required gaskets in the quickest possible time. All stock sheets of gasket material are available in thickness sizes of 1/32”, 1/16”, 1/8” and 1/4”. Additional materials and sizes are available upon ...
Temperature limit: 60 °C - 280 °C
Pressure limit: 10 Pa - 40 Pa
Diameter: 10 mm - 900 mm
Flange gasket ring type Connection: - Flanges see technical datasheet special for high temperature and high pressure Material info: KLINGERSIL® C-4430 PLUS can be used up to a pressure or a temperature. This in ...
Diameter: 15 mm - 600 mm
Model: - - Material bodbocht: - Connection: - - Material Ball: - Pressure: - - Connection: - Pressure: - - Operation: - Approval - - Lenght accord: - DIN 3202-M3 1/2"" up to 2"
Diameter: 5 mm
Outer diameter: 9.5 mm
Shore A hardness: 1.5 unit
Flat seal made of copper, G 1/4 or M12x1.5, EN 837, hardness 40-60 HB Applications ■ Sealing of process connections with parallel threadsSpecial features ■ Large selection of materials and sizes ■ ...
Temperature limit: -30 °C - 2,500 °C
Pressure limit: 0 bar - 100 bar
... require a flat seal for the new product, Jicey provides you solutions in accordance with complex parameters (fluid involved, temperature of use, pressure, solidity and quality of the seal ...
Anaerobic seal, it polymerises in the absence of air in approximately 45 minutes. It replaces pre-formed seals for flat parts. It creates an elastic film. Allows easy disassembly of the ...
... difference to gaskets cut from one piece. In test results it can be seen that at an applied gasket pressure of 20MPa both the welded and the single-piece gasket reach a leakage class ...
... manufactures a wide variety of components, which includes static seals. The static seals are available in four models such as unsplit, split, envelopes and as well as O-rings. A static seal ...
... as the height of inflation ("stroke" of the seal) and the centerline bend radius that the seal can negotiate. These performance parameters are further impacted by the cross-section geometry of the seal. ...
... traditional FIP/CIP gaskets to cure. DYMAX form-in-place/cure-in-place gaskets are silicone free and solvent free. Designed for sealing intricate, complex configurations as well as flat ...
DYMAX Europe GmbH
Flat PTFE Enveloped Gaskets PTFE enveloped gaskets have a PTFE envelope open on one side, usually on the outside. Thanks to their high chemical stability, good mechanical properties ...
DONIT TESNIT, d.o.o.
... Fluoropolymer, or high performance plastic seals. Such seals are recommended for demanding application, with resistance to corrosion and temperature. 3P offers a large range of materials and compounds ...
Temperature limit: 0 °C - 80 °C
Pressure limit: max 30.0 Pa
Diameter: 100 mm - 2,500 mm
I.Performance and Purpose: It makes use of the end-face of steel pipe as sealing face to test defect and bearing strength of steel pipe. It is mainly used in the hydraulic testing of large diameter seamless pipe and a variety of welded ...
beijing Jianke Huifeng Science and Technology
The Omega Seal is designed as a secondary seal for immersed tunnels in combination with the Gina gasket/seal as the primary seal Applications for the Omega seal ...
Temperature limit: 85, 120 °C
Pressure limit: 0 psi - 5 psi
Diameter: 50 mm - 762 mm
... Patented Split Rotary Seal for Worn Shaft Applications The Chesterton® patented Matrix Rotary Seal is a split bearing seal developed to work on worn equipment ...
A.W. Chesterton Company
The VATSEAL is a metal seal for vacuum and cryogenic applications. VATSEALs are a metal seals for vacuum and cryogenic applications. Metal seals are used instead of elastomer seals ...
Diameter: 9 mm - 59 mm
DIN 434 Hot-dip galvanized square flat gasket. DIN 434 Square taper washers for U-sections
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining